TESY Boiler horizontal 120L 3kW - T120H

Ignition pin for sensor applications.

The TESY 60 L electric water heater is designed for floor-standing installation and features a powerful 4 kW heating element. With a working pressure of 8 bar and a 60 L capacity, it provides a practical solution for hot water storage and heating. It features a precision thermometer and TESY’s BELL Effect, a special inlet nozzle designed to control the incoming cold water flow and increase the amount of available hot water by up to 46%.

Copper pipe with a diameter of 22 mm and a length of 5.8 m.

SIT brass brush for boiler cleaning, with M12 connection and 50 mm size.

Timer for water heater operation, with a rated voltage of 230 V AC ±10% and operating temperature range from 0°C to 35°C.

The CLAGE CEX 11/13 is a compact, electronically controlled instant water heater designed for precise, efficient, and comfortable hot-water supply in bathrooms or kitchens. Using TWIN TEMPERATURE Control TTC®, it maintains degree-accurate temperature stability, even under fluctuating water pressure. With one-touch temperature control (20 °C – 60 °C) and Multiple Power System (MPS®) technology, the maximum power can be selected at installation — 9.5 / 11 / 13.5 kW — to perfectly match system requirements. Type: Electronic instant water heater Nominal power rating (MPS®): 9.5 / 11 / 13.5 kW Supply voltage: 400 V (3~ / PE 380–415 V AC) Max operating pressure: 1 MPa (10 bar) Water connections: G ½" Hot water output (Δt = 33 K): 4.8 – 5.8 L/min Switch-on flow rate: 2 L/min Max flow rate: 5 L/min Nominal current: 16 – 20 A (at 400 V) Required cable diameter: 1.5 – 2.5 mm² Max inlet temperature: 60 °C Solar-ready: Yes Protection class: IP 25 Specific water resistance (15 °C): ≥ 1000 Ω cm Weight (filled with water): 2.7 kg Warranty: 12 months The CLAGE CEX 11/13 E-Comfort guarantees instant hot water, optimized energy efficiency, and modern German engineering, making it ideal for both domestic and commercial installations.

The VANSTON 16 L/min gas water heater provides instant hot water with a rated output of 16 L/min (ΔT = 25 K) and a rated heat input of 31 kW. It is suitable for natural gas (NG) and LPG and features Low NOx emissions of 50 mg/kWh. The unit features automatic pulse ignition, flame monitoring and a temperature control knob. With a thermal efficiency of over 86%, IPX4 protection and compatibility with C13 installation configuration, it combines efficient hot water production with practical operation.

The F36 Gas Leak Detector is a 400 ml leak detection spray suitable for checking systems containing LPG, methane, oxygen, nitrogen, compressed air, CO₂, helium and argon. It can also be used to detect leaks in vertical and horizontal pipes at high temperatures, providing a practical solution for leak inspection across a variety of gas and compressed-air systems.