Water Pumps, Submersible & Tanks

The Einhell GC-PW 16 is a powerful petrol water pump designed for quickly transferring large quantities of water in locations where an electrical power supply is unavailable. It is suitable for garden irrigation, water transfer, drainage and other demanding outdoor pumping applications. Its 1600W petrol engine delivers a maximum flow rate of 14,000 L/h (14 m³/h) and a maximum delivery head of 28 m, with a maximum delivery pressure of 2.8 bar. The pump provides a maximum suction height of 7 m and operates at speeds of up to 3,600 min⁻¹. Both the suction and pressure connections are 47.8 mm (G1½" AG), allowing high-volume water transfer. The 1.8 L fuel tank provides practical operating capacity for extended pumping tasks. The GC-PW 16 is designed for mobile use and features a practical carrying handle for easier transportation. With its independent petrol-powered operation, it is a practical solution for pumping water in gardens, agricultural areas and locations without access to mains electricity.

The Einhell GE-PW 46 is a powerful petrol water pump designed for quickly transferring large quantities of water in locations where no connection to the electrical power grid is available. Its 4.6kW four-stroke petrol engine provides the power required for demanding irrigation, water transfer and drainage applications. With a maximum flow rate of 23,000 L/h (23 m³/h), the pump can deliver water to a maximum head of 26 m and generate a maximum delivery pressure of 2.6 bar. The maximum suction height is 6.5 m, providing flexibility when drawing water from tanks, reservoirs and other water sources. Both the suction and pressure connections feature robust 59.6 mm (2") threaded connections. The pump is mounted within a sturdy tubular steel frame, providing stability during operation while also protecting the unit and facilitating transportation. The integrated fuel tank supports extended operating periods, while separate water filling and drain screws simplify priming before operation and draining residual water after use. The GE-PW 46 is supplied with a practical range of connection accessories, including two 50.8 mm (2") hose adapters, two 33.3 mm (1") reducers, two 47.8 mm (1½") adapters and one 50.8 mm (2") intake cage, providing flexibility for different installation requirements.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Max Fuel Tank Size : 4,2lt                                              Suction Port Diameter : 50mm Discharge Port Diameter : 50mm            Engine Type:OHV          Air Cooling:4 Stroke Displacement cc: 196 Head m: 55 Maximum Flow Lt/H: 30 Packaging Weight kg: 31 Net Weight: 29 Single Package Dimensions cm: 43x47x55

The NAKAYAMA NP1150 is a compact 75W submersible fountain pump designed for continuous water circulation in fountains, decorative water features and similar indoor or outdoor applications. With a maximum flow rate of 2,600 L/h (2.6 m³/h), the pump achieves a maximum head of 2.6 m and a maximum pressure of 0.26 bar, providing efficient water circulation for small fountains and decorative installations. The NP1150 is designed for 100% silent operation, making it suitable for applications where low noise levels are important. It can be used in both indoor and outdoor environments. The pump operates on a 220V / 50Hz power supply and can be installed at a maximum depth of 3 m. Its compact dimensions of 23 × 23 × 19 cm allow easy integration into a variety of fountain and water-feature installations.

The BORMANN PRO BGB1080 is a powerful petrol high-pressure water pump designed for applications requiring high delivery pressure and reliable water transfer without access to an electrical power supply. It is suitable for irrigation, agricultural use, water transfer and other demanding outdoor pumping applications. Powered by a 196cc petrol engine with an output of 6.5HP, the pump delivers a maximum flow rate of 18 m³/h (18,000 L/h) and reaches a maximum delivery head of 80 m, making it particularly suitable for applications where water needs to be transferred over significant height differences or distances. The pump features an aluminium pump body, combining durability with reduced weight. It is equipped with a 1.5" suction inlet and provides 1.5" / 1" discharge outlets, offering flexibility for different water delivery requirements. The 4.2 L fuel tank provides practical operating capacity, while the 0.6 L oil capacity supports proper engine lubrication. With a net weight of 21 kg, the unit combines robust construction with practical portability. The BGB1080 is supplied with a fitting set and suction filter, providing the essential accessories for installation and operation.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The AQUASTRONG SMART45 TWIN is a twin booster pump system designed for applications with higher water demand, providing increased flow while maintaining stable water pressure. By combining two SMART45 pumps in parallel, the system can deliver a maximum flow rate of approximately 11 m³/h, while maintaining a maximum head of approximately 45 m. The twin configuration provides significantly greater water delivery capacity compared with a single SMART45, making it particularly suitable for installations where several outlets may operate simultaneously. Instead of increasing the maximum pressure, the parallel arrangement primarily increases the available flow, allowing the system to meet higher and varying water demands efficiently. Its performance curve demonstrates smooth operation across a wide flow range, with the system automatically providing the required water supply according to demand. With its combination of high flow capacity and constant-pressure operation, the SMART45 TWIN is an effective solution for larger residential, multi-dwelling and light commercial water pressure boosting applications.

The AQUASTRONG SMART MINI is a compact domestic booster pump designed to increase water pressure in small residential applications where installation space is limited. Its compact size, quiet operation, and reliable performance make it an excellent solution for apartments, houses, and residential water boosting systems. Powered by a permanent magnet motor, it delivers efficient performance while reducing energy consumption. The integrated Intelligent Protection system enhances operational safety by protecting the pump during demanding working conditions, ensuring long-term reliability. Designed for clean water applications, the SMART MINI can handle liquid temperatures up to 95°C while operating at a low noise level of only 50 dB. Its convenient water fill plug also simplifies installation and maintenance.

The AQUASTRONG EF-01B is a water level float switch designed for the automatic start and stop control of compatible water pumps according to liquid level. It is suitable for water tanks, reservoirs, drainage systems and other applications requiring automatic liquid-level control. The balance block allows the float's operating position and switching range to be adjusted during installation, providing greater flexibility according to the required minimum and maximum water levels. This version comes with a 10 m H07-RN-F cable, making it particularly suitable for installations where a longer cable length is required. AQUASTRONG technical documentation lists 10 m as one of the available cable lengths for the EF-01B, together with electrical ratings of 16(8)A / 250V and 16(14)A / 125V. The EF-01B is designed for a service life of approximately 5,000 operating cycles. Its operating limits allow use with liquids at temperatures up to 35°C and a maximum ambient temperature of 40°C.

The AQUASTRONG EF-01 is a water level float switch designed for the automatic control of pumps according to liquid level. It provides a simple and reliable solution for controlling the start and stop of compatible water pumps in tanks, reservoirs, drainage systems and other water-level control applications. This version is supplied without a balance block and comes with a 5 m cable, providing flexibility during installation and allowing the switching position to be selected according to the requirements of the system. The EF-01 is rated at 16(8)A / 250V and 16(14)A / 125V. The switch is designed for a service life of approximately 5,000 operating cycles. AQUASTRONG's catalogue confirms these electrical ratings and operating limits for the EF-01 series. It is suitable for liquids with temperatures up to 35°C and installations with a maximum ambient temperature of 40°C.

The AQUASTRONG ECMI(m)2-3SE is an Intelligent stainless steel multistage centrifugal surface pump designed for pressure boosting, household water supply and automatic irrigation applications. Its integrated PCL microcomputer chip provides automatic control of pump operation, offering a practical solution for water supply systems where automatic operation and additional protection are required. The Intelligent control system provides automatic start and stop, delay-start protection and no-water protection, helping protect the pump and ensuring reliable operation according to water demand. Powered by a 0.37kW (0.5HP) single-phase motor, the pump delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 27 m. Its multistage hydraulic design provides consistent pressure across a wide operating range. The motor features copper windings, built-in thermal protection, Class F insulation and IPX4 protection. The pump is suitable for clean water or liquids with similar physical and chemical properties, with an operating liquid temperature range of 4–60°C, a maximum ambient temperature of 50°C, and a maximum working pressure of 10 bar.   Comes with a 1.6 m power cable with UK plug.

The AQUASTRONG ECMIm2-40 is an Intelligent stainless steel multistage centrifugal surface pump designed for pressure boosting, household water supply, automatic irrigation and other clean-water applications. Its integrated PCL microcomputer chip provides intelligent pump control according to water demand. The system features automatic start and stop, delay-start protection and no-water protection, providing convenient automatic operation while helping protect the pump against unsuitable operating conditions. Powered by a 0.37kW (0.5HP) single-phase motor, the ECMIm2-40 delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 36 m. Its multistage hydraulic design provides consistent pressure performance across a wide range of flow requirements. The motor features copper windings, built-in thermal protection, Class F insulation and IPX4 protection. The pump is suitable for transferring clean water or other liquids with similar physical and chemical properties, with a liquid temperature range of 4–60°C, maximum ambient temperature of 50°C, and maximum working pressure of 10 bar. Comes with a 1.6 m power cable with UK plug.

The AQUASTRONG ECMIm2-50SE is an Intelligent stainless steel multistage centrifugal surface pump designed for pressure boosting, household water supply, automatic irrigation and other applications requiring reliable clean-water transfer. Its integrated PCL microcomputer chip provides Intelligent control of the pump according to water demand. The system features automatic start and stop, delay-start protection and no-water protection, combining convenient automatic operation with additional protection for the pump. Powered by a 0.55kW (0.75HP) single-phase motor, the ECMIm2-50SE delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 44 m. Its multistage hydraulic design provides strong pressure performance across a wide range of flow requirements, making it suitable for household water systems, pressure boosting and automatic watering. The motor features copper windings, built-in thermal protection, Class F insulation and IPX4 protection. The pump can transfer clean water or other liquids with similar physical and chemical properties. It operates with liquid temperatures from 4°C to 60°C, ambient temperatures up to 50°C, and a maximum working pressure of 10 bar. Comes with a 1.6 m power cable with UK plug.

The AQUASTRONG ECMIm2-60SE is an Intelligent stainless steel multistage centrifugal surface pump designed for pressure boosting, household water supply, automatic irrigation and other applications requiring reliable clean-water transfer. Its integrated PCL microcomputer chip provides Intelligent control of pump operation according to water demand. The system features automatic start and stop, delay-start protection and no-water protection, providing convenient automatic operation while helping protect the pump during unsuitable operating conditions. Powered by a 0.75kW (1HP) single-phase motor, the ECMIm2-60SE delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 54 m. Its multistage hydraulic design provides strong pressure performance across a wide operating range, making it particularly suitable for applications requiring increased water pressure. The motor features copper windings, built-in thermal protection, Class F insulation and IPX4 protection. The pump is suitable for transferring clean water or other liquids with similar physical and chemical properties. It operates with liquid temperatures from 4°C to 60°C, ambient temperatures up to 50°C, and a maximum working pressure of 10 bar. Comes with a 1.6 m power cable with UK plug.

The AQUASTRONG EPS-01 is an automatic electronic pressure controller designed to automate the operation of compatible water pumps. It controls pump start and stop according to water demand, providing convenient automatic operation for domestic water supply, pressure boosting, irrigation and other clean-water pumping systems. AQUASTRONG documentation identifies the EPS-01 as an automatic pressure-switch controller with a 1.5 bar starting pressure, 10 bar maximum pressure and IP65 protection. The controller operates at 110–240V, 50/60Hz, supports a maximum current of 10A and, according to the supplied specification, a maximum connected power of 1.5kW. Maximum operating pressure is 10 bar, while maximum operating temperature is 60°C. The EPS-01 features IP65 protection and a pressure gauge for convenient monitoring of the system. Its standard connection is G1", with optional G1¼", G1½" and NPT1" connection configurations according to the supplied specifications. With a preset starting pressure of 1.5 bar, the EPS-01 provides a practical solution for converting a compatible conventional water pump into an automatically controlled pumping system.

The AQUASTRONG EPS-01-2.2 is an automatic electronic pressure controller designed to automate the start and stop operation of compatible water pumps according to water demand. It is suitable for domestic water supply, pressure boosting, irrigation and other clean-water pumping systems. This 2.2 bar version is preset to start the connected pump when system pressure drops to approximately 2.2 bar. AQUASTRONG documentation confirms that the EPS-01 series is available with different preset starting pressures, including 2.2 bar. According to the supplied specifications, the EPS-01-2.2 operates at 110–240V, 50/60Hz, supports a maximum current of 10A and a maximum connected power of 1.5kW. It is rated for a maximum operating pressure of 10 bar and a maximum operating temperature of 60°C. The controller features IP65 protection and an integrated pressure gauge for convenient monitoring of system pressure. The standard connection thread is G1", while G1¼", G1½" and NPT1" connections are listed as optional configurations. Its automatic operation provides a compact and convenient solution for converting a compatible conventional water pump into an automatically controlled pressure-boosting system.

The AQUASTRONG EPS-02 is an automatic electronic pressure controller designed to provide convenient and reliable automatic control of compatible water pumps. It automatically manages pump operation according to water demand, making it suitable for domestic water supply, pressure boosting, irrigation and other clean-water pumping systems. A key feature of the EPS-02 is its adjustable starting pressure. The supplied specification shows a 1.5 bar starting pressure setting, while AQUASTRONG product documentation identifies the EPS-02 as an adjustable version with a starting-pressure range of approximately 1.5–3 bar. The controller supports a maximum pump power of 1.1kW and maximum current of 10A. It has a maximum operating pressure of 10 bar, while its IP65 protection rating provides protection suitable for demanding water-pump installations. The EPS-02 uses an R1" connection thread according to the supplied technical data and can operate at temperatures up to 60°C. Its automatic operation makes it a practical solution for converting a compatible conventional water pump into an automatically controlled pressure-boosting system.

The AQUASMART 45 INVERTER is a smart variable-speed booster pump designed to provide constant water pressure for residential homes, villas, apartments, and light commercial buildings. Its advanced inverter technology automatically adjusts motor speed according to water demand, ensuring consistent pressure while minimizing energy consumption. Powered by a permanent magnet motor, the pump delivers outstanding efficiency with a maximum power of 750W, a maximum head of 45 m, and a maximum flow rate of 5.5 m³/h, making it ideal for demanding domestic and light commercial water boosting applications. With self-priming capability up to 8 metres, installation is simple and flexible. The integrated Intelligent Protection system safeguards the pump against: Power or voltage faults Pump jamming Pipeline leakage Dry running Overheating Pressure sensor failure Its quiet operation, IP55 protection rating, and ability to handle water temperatures up to 80°C make the AQUASMART 45 INVERTER a reliable, energy-efficient, and long-lasting water pressure solution.

The NAKAYAMA PRO SP1315 is a powerful 1300W submersible sewage pump designed for pumping dirty water and wastewater in demanding drainage and sewage applications. The pump is equipped with an unshrouded cutting impeller, allowing it to handle wastewater containing solids and helping reduce the risk of clogging during operation. Its robust design makes it suitable for sewage pits, drainage systems and other applications involving heavily contaminated water. With a maximum flow rate of 18,000 L/h (18 m³/h) and a maximum delivery head of 12 m, the SP1315 provides high pumping capacity for demanding installations. It can operate at a maximum immersion depth of 7 m and with water temperatures up to 40°C. The pump operates on a 220V/50Hz power supply and features a large 2" discharge outlet for efficient wastewater discharge. It comes with an 8 m power cable, while its compact dimensions of 42 × 37 × 20 cm facilitate installation in wastewater pits and drainage systems.

The Einhell GE-PP 1100 N-A is a powerful 1100W submersible high-pressure water pump designed for pumping clean water from wells, cisterns, reservoirs and other water sources. With a maximum flow rate of 6,000 L/h (6 m³/h) and a maximum delivery head of 45 m, it is suitable for demanding garden irrigation and water supply applications requiring high pressure. The multi-stage impeller system generates a maximum delivery pressure of 4.5 bar, providing efficient water delivery even where higher operating pressure is required. The pump features an automatic function, allowing operation according to water demand. Integrated dry-running protection helps protect the pump when insufficient water is available, while an overload switch provides additional protection for the motor. Its robust pump housing is manufactured from rust-resistant stainless steel, providing excellent corrosion resistance and durability. The pressure connection is reinforced with a stainless steel insert, while the high-quality mechanical seal contributes to a long and reliable operating life. The GE-PP 1100 N-A can operate at a maximum immersion depth of 12 m and is suitable for water temperatures up to 35°C. It comes with a 15 m power cable, providing flexibility for installation in deeper tanks, cisterns and wells.