Water Filtration

The EIGER EG-PCT-A8 is a replacement PCT filter cartridge designed specifically for the EIGER EG-RO-600B reverse osmosis water filtration system. It forms part of the system's multi-stage filtration process and is intended to restore filtration performance when the original cartridge reaches the end of its service life. Its enclosed cartridge construction allows the filtration element to be replaced as a complete unit, helping provide a clean and convenient maintenance process. The cartridge is specifically identified as compatible with the EG-RO-600B, making it suitable for scheduled replacement within this system.

The Eiger Infrared is an in-line water treatment filter designed for refrigerators, reverse osmosis systems and other compatible water filtration installations. It contains specialised infrared media intended for use as a final water-treatment stage. It can be installed after the main filtration stages of a system, providing a practical solution for applications requiring a compact in-line cartridge. The filter measures 10″ in height and 2″ in diameter and features 1/4″ connections for straightforward installation in compatible water supply lines.

The Eiger In-Line is an alkaline water filter designed for refrigerators, reverse osmosis systems and other compatible water filtration installations. It is primarily intended for use as a final treatment stage after the reverse osmosis membrane. Its specialised media helps enrich the water with selected minerals, such as calcium and magnesium, and may increase the water’s pH depending on the incoming water quality and composition. It can be used as an additional remineralisation stage in reverse osmosis systems, where dissolved salts and minerals have previously been significantly reduced. Its compact 10″ x 2″ design and 1/4″ connections allow straightforward installation in compatible water supply lines.

The DIGIFLOW 8000T water flow and filter change meter is your reliable digital companion for monitoring when it's time to replace your water filters. It measures the gallons of water going through your filters, notifying you when it's time to change them.

The EIGER EG-05-01-C is a replacement water filter cartridge designed for compatible EIGER shower filtration systems. It is intended to maintain the filtration performance of the shower filter by replacing the used internal cartridge when required. The cartridge helps condition the water used during showering by reducing impurities targeted by the compatible filtration system. Its compact replaceable design allows routine maintenance without replacing the complete shower filter assembly. The specified connection/OD size is 8 mm × 3/8" BSP.  

The EIGER EG-SC-40 is a self-cleaning central water filter designed for installation on the main incoming water supply. It provides mechanical pre-filtration at 40 micron, helping capture sediment and suspended impurities before the water reaches the downstream plumbing system and connected equipment. The filter helps reduce particles such as sand, rust, silt and other suspended solids, making it suitable as a first-stage protective filter for domestic water installations. By intercepting these contaminants at the water inlet, it can help protect pipes, faucets, water heaters and other downstream equipment from particulate accumulation. Its self-cleaning / flushing design allows accumulated contaminants to be discharged through the lower drain valve, simplifying routine maintenance without requiring frequent removal of the filtration element. The integrated pressure gauge allows convenient monitoring of the system pressure. With an R2 3/4" pipe thread, the EG-SC-40 is suitable for compatible main water supply installations where compact sediment pre-filtration and easy maintenance are required.

The Eiger 1812 – 50GPD reverse osmosis membrane is designed for use in domestic and commercial reverse osmosis systems. It provides an extremely fine separation capability of up to 0.0001μm and helps reduce dissolved salts, heavy metals and other unwanted substances from the water. With a nominal production capacity of 50 gallons per day, it delivers reliable performance and is suitable for most standard reverse osmosis systems using 1812-type membrane housings. Its high-quality construction provides dependable operation and a long service life when used according to the system specifications and together with suitable pre-filters. Main Features 1812-type reverse osmosis membrane Nominal production capacity of 50GPD Separation capability of up to 0.0001μm Helps reduce dissolved salts and total dissolved solids Helps reduce heavy metals and other unwanted substances Compatible with most standard reverse osmosis systems Suitable for domestic and commercial applications Compact design and easy replacement Service life of up to 24 months, depending on use and water quality

The PHILIPS AUT870R400 is a replacement reverse osmosis filter with a nominal capacity of 400 GPD, designed as the main purification stage in a compatible PHILIPS RO water filtration system. Reverse osmosis technology provides extremely fine filtration, helping reduce dissolved contaminants, water hardness and other unwanted substances that conventional filtration may not effectively remove. PHILIPS RO technology provides filtration down to approximately 0.0001 micron, helping reduce contaminants such as chlorine, pesticides, heavy metals, bacteria and viruses, while also significantly reducing water hardness. The dedicated cartridge format is designed for straightforward replacement and reliable operation within its compatible PHILIPS filtration system. PHILIPS notes that actual filter life depends on daily water consumption and local inlet-water quality.

The PHILIPS AWP9820 X-Guard Power is a 3-stage scale inhibitor designed to protect water-heating household appliances against scale formation and sediment. It is suitable for applications such as water heaters, washing machines and dishwashers, helping reduce scale accumulation and extend protection of equipment exposed to hard water. Its 3-stage filtration system filters sediment down to 40 microns, while the X-Guard Power antiscalant technology helps inhibit scale formation caused by hardness minerals such as calcium and magnesium. The system has a filtration capacity of up to 27,000 litres and a filter lifetime of up to 6 months, depending on local water quality and usage. The unit is made from BPA-free material and accepts the PHILIPS AWP183 replacement cartridge. It should be noted that the AWP9820 is not a water softener: it inhibits scale formation rather than removing calcium and magnesium from the water.  

The PHILIPS AWP225 Micro X-Clean Instant replacement filters are designed for compatible PHILIPS instant water filtration systems, including the AWP2980 Powered Pitcher. They use highly porous activated carbon fibre, providing efficient adsorption while maintaining a fast water flow. The Micro X-Clean Instant technology helps reduce chlorine, lead, pesticides and microplastics, improving the taste and quality of municipal tap water. Each cartridge provides a filtration capacity of approximately 100 litres, with a recommended service life of approximately 1 month, depending on water quality and consumption. The pack contains 3 replacement cartridges.  

The PHILIPS AWP175 is the genuine replacement cartridge designed for the PHILIPS AWP1775 shower filtration system. It uses NSF-certified KDF filtration media to reduce residual chlorine and impurities such as rust and sediment, providing cleaner water for a more comfortable shower experience. The cartridge has a filtration capacity of up to 50,000 litres and supports a water flow of up to 8 L/min. It is designed for mains tap water with an operating temperature of 5–60°C and inlet pressure of 0.15–0.4 MPa (1.5–4 bar).

The Philips AquaShield AUT7006 800 GPD Reverse Osmosis Under-Sink Water Filtration System is a high-performance 5-stage, tankless RO system designed to provide deep filtration directly from the dedicated faucet. Its advanced filtration combines an innovative 4-in-1 PC filter with an 800 GPD RO membrane, achieving filtration down to 0.0001 micron. According to Philips, the system can reduce up to 99.999% of bacteria and viruses and up to 99% of chlorine, pesticides, water hardness and heavy metals under the specified test conditions. The tankless design delivers filtered water without requiring a separate storage tank, providing a fast flow rate of up to 2.1 L/min while saving valuable under-sink space. A smart faucet provides a filter replacement reminder, while the system also features automatic flushing for convenient maintenance. The long-life 4-in-1 PC filter is rated for 12–24 months, while the RO membrane provides an estimated service life of 48–60 months, depending on water quality and daily consumption.

The PHILIPS AUT780 is the dedicated 800 GPD replacement reverse osmosis filter for the PHILIPS AUT7006 under-sink water purification system. It forms the main purification stage of the system and uses a high-performance reverse osmosis membrane to provide deep filtration of mains water, helping reduce dissolved contaminants and impurities while maintaining the high water-production rate required by the tankless AUT7006 system. With a nominal capacity of 800 GPD, the AUT780 is designed for high-flow direct filtration and convenient cartridge replacement. According to PHILIPS specifications for the AUT7006, the RO filter has a recommended service life of approximately 48–60 months, depending on inlet-water quality and actual consumption. Its dedicated cartridge format ensures correct fit and operation with the PHILIPS AUT7006 system.

The Philips AUT4030R400 400 GPD Reverse Osmosis Under-Sink Water Filtration System is a compact, tankless Direct Flow solution featuring an efficient 4-stage filtration system. Its reverse osmosis membrane provides filtration down to 0.0001 micron, helping reduce chlorine, heavy metals, pesticides, bacteria, viruses, VOCs, microplastics and water hardness. The slim design, measuring only 114 mm wide, allows convenient installation in limited under-sink spaces without the need for a separate storage tank. The system offers two filtration modes through its dedicated faucet: filtered water at up to 2 L/min and RO-purified water at approximately 1.1 L/min. It uses a 3-in-1 filter with coconut-shell activated carbon together with the RO membrane, while an integrated filter-life indicator reminds the user when replacement is required. The official Philips specifications indicate a filter life of approximately 12 months for the 3-in-1 cartridge and 36 months for the RO membrane.

Next-generation instant water filter Powered by the highly porous activated carbon fibre, Philips Micro X-Clean Instant filter turns tap water into crisp and pure tasting water by reducing chlorine, lead, pesticide and microplastics.

The PHILIPS X-Guard Power AWP183 is a replacement scale inhibitor media pack designed for the compatible PHILIPS X-Guard Power AWP9820 system. Rather than functioning as a conventional sediment or drinking-water filter cartridge, the AWP183 is specifically designed to help inhibit limescale formation in water-using appliances. The scale-inhibiting media helps prevent hardness minerals from forming deposits on internal components, contributing to the protection of appliances such as water heaters, washing machines and dishwashers. Regular replacement helps maintain the anti-scale performance of the X-Guard Power system. The package contains 2 replacement scale inhibitor elements. The AWP183 does not soften the water by removing calcium and magnesium; its function is to inhibit their tendency to form scale deposits.

The ECOSOFT P’URE KPOMPROECO is a complete pressure booster pump kit designed for domestic reverse osmosis systems operating with low or unstable mains water pressure. By increasing the feed pressure to the RO membrane, it helps the filtration system operate efficiently and maintain consistent purified-water production. ECOSOFT recommends the pump particularly when mains pressure is below 3 bar or unstable, and the unit can also be installed with compatible reverse osmosis systems from other manufacturers. The unit incorporates automatic low- and high-pressure switches, automatically controlling pump operation according to the water supply and storage-tank status. The low-pressure protection stops the pump if the incoming water supply is interrupted, while the high-pressure switch stops operation when the RO storage tank is full. According to ECOSOFT, adequate pressure can also contribute to 30–50% water savings compared with operation under insufficient pressure. The kit includes the necessary tubing and fittings for installation.

The Eiger WF-SST-1 Countertop Water Filtration System is a single-stage countertop filter housing designed for convenient drinking-water filtration in homes and offices. Its stainless-steel (Inox) housing offers a clean, durable design, while the integrated outlet faucet provides easy access to filtered water directly from the countertop. It is compatible with standard 2.5" × 10" filter cartridges, allowing the appropriate cartridge to be selected according to the desired filtration requirements. The system connects directly to the kitchen faucet using a diverter valve, allowing the user to switch between filtered and regular tap water. Installation is simple and requires no electricity, making it a practical solution for everyday use. The WF-SST-1 is supplied without a filter cartridge, so a compatible 2.5" × 10" cartridge must be purchased separately.

The PHILIPS AUT811 is a Carbon Block replacement cartridge designed for compatible PHILIPS on-tap water filtration systems, including the AUT1211. Its 3-stage microfiltration provides filtration down to 0.01 micron, helping reduce particulate matter, chlorine, lead and pesticides while improving the taste and odour of tap water. PHILIPS specifies up to 99% chlorine reduction for this cartridge. The cartridge features the PHILIPS QuickTwist design for quick, hygienic replacement without additional tools. It is designed for municipal tap water at an inlet temperature of 5–38°C and pressure of 0.1–0.4 MPa (1–4 bar). Depending on the specific AUT811 market version and operating conditions, PHILIPS documentation specifies a service life of up to 24 months.

The EIGER EG-600G-A8 is a high-performance replacement reverse osmosis membrane specifically designed for the EIGER EG-RO-600B A8 direct-flow system. With a nominal production capacity of 600 GPD, it acts as the system's main RO filtration stage, providing a high and consistent purified-water flow without requiring a conventional storage tank. The compatibility with the EG-RO-600B is also supported by EIGER's official documentation for that system. Using Thin Film Composite (TFC) membrane technology, it provides an extremely fine separation rating of approximately 0.0001 micron and helps reduce dissolved solids, salts, heavy metals, microorganisms and other unwanted substances from the incoming water. Its estimated service life is 18–24 months, depending on feed-water quality, usage, operating conditions and timely maintenance of the system's pre-filters.

The EIGER BBION10 is a replacement cartridge used as a water-softening stage in compatible central water-filtration installations. Its nominal size is 10 inches high and 4.5 inches in diameter, matching the Big Blue 10-inch housing format. Product code: WF-ION-10BB Filter type: Water-softening cartridge Nominal size: 10″ high × 4.5″ diameter Compatible housing format: Big Blue 10″

The EIGER BBION20 is a replacement cartridge used as a water-softening stage in compatible central water-filtration installations. Its nominal size is 20 inches high and 4.5 inches in diameter, matching the Big Blue 20-inch housing format. Product code: WF-ION-20BB Filter type: Water-softening cartridge Nominal size: 20″ high × 4.5″ diameter Compatible housing format: Big Blue 20″

Το βρυσάκι είναι κατασκευασμένο για τοποθέτηση στον πάγκο ή τον νεροχύτη της κουζίνας για συστήματα κάτω πάγκου ή αντίστροφης όσμωσης. Είναι κατασκευασμένο από ατσάλι SS304.

The PHILIPS X-Guard AWP305 is a replacement filter cartridge for compatible PHILIPS on-tap water filtration systems. It uses high-quality natural activated carbon to reduce up to 99% of chlorine and substances that negatively affect the taste of tap water, providing fresher, better-tasting water for drinking and cooking. The cartridge provides a filtration capacity of up to 1,000 litres and is designed specifically for mains tap water. Its practical twist-type design enables quick and straightforward replacement. PHILIPS lists the AWP305 as a compatible replacement cartridge for several X-Guard on-tap systems, including the AWP3703, AWP3704 and AWP3705P1.