AUTOGLYM Polar collection kit 3pcs x 500ml - VP3PC

Step 1 – Polar Blast

Polar Blast is a pre-wash foam designed to loosen and remove the upper layer of dirt before the main wash.

Pre-washing helps reduce the amount of contamination remaining on the paintwork before contact washing with a sponge or wash mitt.

Directions:

1. Ensure the bodywork and wheels are cool to the touch and out of direct sunlight.
2. As a starting point, mix approximately 100 ml of Polar Blast with 500 ml of water in the foam bottle.
3. Spray onto the vehicle starting from the bottom, covering exterior surfaces, glass and wheels.
4. Allow the product to dwell for up to 10 minutes, without allowing it to dry.
5. Rinse thoroughly with water.

Step 2 – Polar Wash

Polar Wash is a high-foaming shampoo designed for application using a pressure washer and foam cannon. Its thick foam helps loosen dirt while making it easy to see which areas have already been cleaned.

For the most thorough wash, gently agitate the foam using a sponge or wash mitt.

Directions:

1. Apply only to cool surfaces and away from direct sunlight.
2. A pre-wash with Polar Blast is recommended.
3. Adjust the dilution depending on the desired foam density. A mixture stronger than 50:50 is not recommended.
4. Approximately 250 ml of mixed solution should be sufficient for an average-sized vehicle.
5. Spray onto the vehicle starting from the bottom.
6. Agitate using a sponge or wash mitt.
7. Rinse thoroughly and dry.

Not suitable for soft-top convertibles.

Step 3 – Polar Seal

Polar Seal is the final stage of the Polar system, creating a protective hydrophobic coating with a high-gloss finish.

It is applied to a clean, wet vehicle and helps water flow quickly from the surface, significantly reducing drying time.

Directions:

1. Ensure the vehicle is clean, wet, cool and out of direct sunlight.
2. Add no more than 40 ml of Polar Seal to the foam bottle.
3. Add at least 200 ml of water.
4. Spray onto the exterior surfaces.
5. Avoid direct application to the windscreen.
6. Rinse thoroughly.
7. Dry the vehicle with a cloth to help prevent water spotting.

Polar Seal is not recommended for application more than once per month.

Not suitable for soft-top convertibles.

Features

• Complete 3-step car care system
• Pre-wash, wash and protection
• Designed for use with a pressure washer and foam cannon
• Rich, high-coverage foam
• Hydrophobic protection
• High-gloss finish
• Helps reduce vehicle drying time
• Ideal gift set for car care enthusiasts
• Convenient 500 ml bottles

Important Instructions

• Do not allow the products to dry on the vehicle.
• Do not apply to hot surfaces or in direct sunlight.
• Do not store diluted product.
• Rinse the foam bottle and pressure washer lance after use.