Construction

Pre-mixed formula, ready to mix with water Suitable for plastering, repairs, and general construction work Excellent adhesion and stability For both interior and exterior applications Easy manual application Covers a wide range of construction requirements Classified as mortar type CSIV - W0

Product: SOUDAL Activator 601 Spray 500ml

COLOR: Grey. CONSUMPTION: Typical consumption for bricks of dimensions 6 x 9 x 12 cm: 20.0 kg/m² of masonry. PACKAGING: 25 kg.  

Colour : White. Consumption : 1.5-4.0 kg/m². Packaging : 25 kg   

COLOR: White. CONSUMPTION:1.5-4.0 kg/m². PACKAGING: 25 kg  

COLOR: White. CONSUMPTION: Approx. 0.9 kg/m²/mm of layer thickness. PACKAGING: 20 kg.  

Repair bonding mortar based on gray cement. Advantages: Abrasion resistance Very good adhesion to substrate Waterproofness Simplification of tasks

Repair material based on high strength cement. Advantages: Abrasion resistance Very good adhesion to substrate Waterproofness Simplification of tasks

Mixing Ratio: 25kg in 8-10L water Pot life: 4 hours/remix every 1 hour at 23 °C and 50% RH Thickness: 1-2mm/coat Consumption: 2kg/m2 depending on surface Application temperature: +5 ºC - +35 ºC

Suitable for high-strength repairs to concrete. Easy-to-use by hand (trowel) or machine application. Maximum application thickness per layer: 40 mm.

SZ-SUPERPLAST ORIGINAL is a strong cement-based finishing mortar, reinforced with polymers and fibers. The material complies with and far exceeds the requirements of the European standard EN 998-1 as a CSIII - W0 type mortar. Product Properties: Factory packaged product For interior and exterior use Excellent mechanical strength Color: Grey 25kg Coverage: 2.5kg/㎡

Ready-to-use repair material Lightweight High coverage Easy to work with Ultra-white Filling and finishing of cracks, splits, and openings Stopping scratches and cracks Smoothing local surface irregularities Repairing and sealing joints and bevels

High quality grey cement. Can be used as concrete, render or mortar.

Expertly formulated with ISOMAT's innovative Crystal Gel technology, it features quicker setting and hardening times than traditional standard-set adhesives (3-6 h), no matter the season, thus speeding up project completion. Provides no vertical slip and long open and correction times, even at high temperatures. Plus, thanks to its creamy consistency, it ensures outstanding workability and effortless application along with full tile and substrate wettability. Application fields: For fixing absorbent and non-absorbent wall and floor tiles, including natural stone, decorative bricks and large-format tiles, to a variety of substrates, especially where high adhesion, extra flexibility and moisture resistance (e.g. old tiles, balconies, swimming pools, gypsum board, heated floors, etc.) are required. For interior and exterior use.   COLOR: White. CONSUMPTION: 1.5-4.0 kg/m². PACKAGING: 25 kg.

Joint finish 500ML For the smoothening of all types of joints immediately after application of the sealant

COLOR: Light Grey CONSUMPTION: Joint 5 mm x 5 mm: 1 cartridge/11.2 m of joint length. PACKAGING: 280 ml.  

COLOR: White CONSUMPTION:0.2-2.0 kg/m², depending on tile size and joint width. PACKAGING: 5 kg. For floor and wall tile grouting. For interior and exterior use, for joint width 2-5 mm. 

COLOR: Black CONSUMPTION:0.2-2.0 kg/m², depending on tile size and joint width. PACKAGING: 5 kg. For floor and wall tile grouting. For interior and exterior use, for joint width 2-5 mm. 

COLOR: Grey CONSUMPTION:0.2-2.0 kg/m², depending on tile size and joint width. PACKAGING: 5 kg. For floor and wall tile grouting. For interior and exterior use, for joint width 2-5 mm. 

COLOR: Light Grey CONSUMPTION:0.2-2.0 kg/m², depending on tile size and joint width. PACKAGING: 5 kg. For floor and wall tile grouting. For interior and exterior use, for joint width 2-5 mm.