ISOMAT FIX-RAPID Cementitious anchoring and sealing mortar 4kg

FIX-RAPID is a fast-setting cement showing a

hardening reaction that starts immediately after the

addition of water.

Fields of application

FIX-RAPID is used for quick repair, fixing,

anchoring, patching of cavities or holes, etc. and

generally wherever high strength and fast

application is necessary. FIX-RAPID may be

applied on floors, walls or ceilings in interior and

exterior applications.

Technical data

Form: cementitious powder

Color: grey

Water demand: 30% by weight of

 FIX-RAPID

Bulk density

of dry mortar: 1.2  0.1 kg/l

Chloride ion content: 0.00%

Compressive strength

24 hours: > 30.0 N/mm2

28 days: > 40.0 N/mm2

Flexural strength: > 6.0 N/mm2

Pot life: 1.5-2 min at +200C

Initial setting: 2 min

Final setting: 3 min

Directions for use

1. Preparation of substrate

The substrate must be clean, free of dust, oil, loose

materials etc. and should be thoroughly

dampened, before the application of FIX-RAPID.

2. Application

FIX-RAPID is gradually added to water under

continuous stirring, until a viscous, no-slump putty

is formed suitable for patching or fixing works.

Mixing time should not exceed 1 min. It is

recommended to mix a small quantity every time

because of the short working time.

Consumption

Approx. 1.6 kg FIX-RAPID are required to prepare

1 l of hardened mixture.

Packaging

4 kg.

Shelf life – Storage

12 months from production date if stored in

original, unopened packaging, in places protected

from moisture and frost.

Remarks

• The temperature during application should be

at least +50C.

• Metallic surface that will be in contact with FIXRAPID should be protected with a suitable

anticorrosive coating.

• In cases of extensive work or applications

requiring increased thickness, FIX-RAPID may

be mixed with 1-3 parts by volume of sand,

before the addition of water. In this case there

will be a slight increase of setting time. Also,

setting time may be extended as desired with

the addition of ordinary cement.

• During application the use of rubber gloves is

recommended.

• Material that has started to set must not be

softened again with water.

• Tools should be cleaned with water,

immediately after use.

• The product contains cement, which reacts as

alkaline with water and is classified as irritant.

• Consult the safety instructions written on the

packaging before use.