NANOPHOS SurfaPore W impregnation solution - waterproofing and oil protection for absorbent wooden surfaces 1L

Technical Specifications

• Product Type: Impregnation solution for waterproofing and oil protection

• Capacity: 1L

• Formula: Water-based liquid product

• Use: Waterproofing, oil protection, and maintenance of absorbent wooden surfaces

• Suitable Surfaces: Natural absorbent wood

• Application Area: Furniture, garden timber, pergolas, decks, docks, fences, façades, and roof supports

• Finish: Invisible protection without blocking wood pores

• Dilution: Ready to use, do not dilute

• Application Method: Brush, paint brush, roller, or sprayer

• Application Temperature: 10°C to 35°C

• Full Effectiveness: 24 hours after application

• Reapplication: Within 2 hours on highly absorbent wooden surfaces

• Coverage: 8-10m²/L, depending on surface absorbency

• Application Instructions

• SurfaPore W should be applied on natural, absorbent wood. If an older coating, varnish, or film is present, remove it before application.

• The application surface should be clean and dry. The product is ready to use and must not be diluted. Shake well before use.

• Apply SurfaPore W with a brush, paint brush, roller, or sprayer, covering the surface evenly. Full effectiveness is achieved 24 hours after application.

• On highly absorbent wooden surfaces, reapply within 2 hours. The recommended application temperature is 10°C to 35°C.

• Recoating Information

• The use of wood paints or varnishes after applying SurfaPore W may affect their shade or adhesion. Test application is recommended 72 hours after applying SurfaPore W.