Pumps

The CFA25-40-180 is a high energy-efficient circulator pump designed for reliable water circulation in heating, hot-water circulation and other compatible circulation systems. Featuring a multistage centrifugal pump structure and electric operation, it provides efficient and dependable circulation while being suitable for installations where continuous and automatic pumping performance is required. The pump features a stainless steel construction, offering good durability and resistance to corrosion. It operates on a 230V/50Hz power supply and provides a maximum head of 4 m. Its compact circulator configuration makes the CFA25-40-180 suitable for integration into domestic and light commercial water circulation systems.

The IMAS IM25-6-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating under pressure in closed or open circuits. The pump features three selectable operating speeds, with power consumption of 46W, 67W and 93W, allowing its performance to be adjusted according to the requirements of the installation. It provides a maximum flow rate of 4.1 m³/h and a maximum head of 6 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and sealing flange are manufactured from stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-6-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The IMAS IM25-4S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids free from chemicals. It is suitable for domestic central heating and air-conditioning systems, operating in both closed and open pressurized circuits. The pump provides three selectable operating speeds, with power consumption of 38W, 53W and 72W, allowing its performance to be adapted to the requirements of the installation. Its hydraulic section is manufactured from cast iron and incorporates a wet rotor motor. The motor housing is made of die-cast aluminium, while the technopolymer impeller provides reliable and durable operation. The motor shaft is manufactured from hardened stainless steel, supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protection sleeve, stator sleeve and sealing flange are also manufactured from stainless steel. Additional construction features include a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. The motor has IP44 protection and Class F insulation. The IM25-4S-180 operates from a single-phase 230V/50Hz supply, has an installation length of 180 mm and features 1½" threaded connections. Installation must be carried out with the motor shaft in a horizontal position.

The IMAS IM25-8S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The IMAS IM32-10S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in closed or open pressurized circuits. The pump features three selectable operating speeds, with power consumption of 150W, 210W and 270W, allowing its performance to be adjusted according to the requirements of the heating or circulation system. It provides a maximum head of 10 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are manufactured from stainless steel. Additional construction features include a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM32-10S-180 can operate with liquid temperatures up to 110°C and at a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1¼" threaded connections and must be installed with the motor shaft in a horizontal position.

The IMAS IM25-4S-180B is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic central heating and air-conditioning systems operating in closed or open pressurized circuits. The pump features three selectable operating speeds, with power consumption of 38W, 53W and 72W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.0 m³/h and a maximum head of 4 m. The hydraulic pump body is manufactured from brass and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective sleeve, stator sleeve and sealing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-4S-180B can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The IMAS IM25-8S-180B is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The pump body is manufactured from brass and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective sleeve, stator sleeve and sealing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180B can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

Voltage V: 12 Maximum Flow Lt/H: 4180 Head m: 4 Packaging Weight kg: 0.3 Net Weight: 0.25 Single Package 1 Dimensions cm: 10x12x9

The AQUASTRONG EBP25-15A/125 is an automatic booster pump specifically designed for hot water pressure boosting in residential applications. It is ideal for domestic taps, under-sink installations, solar water heaters, and small garden irrigation systems, delivering reliable and consistent water pressure. Its automatic operation starts the pump only when water demand is detected, improving user comfort while reducing energy consumption. The compact design and quiet operation make it easy to install, even in confined spaces. Designed for clean hot water applications, the EBP25-15A/125 provides dependable performance for domestic water pressure boosting and hot water circulation systems.

Original Einhell suction hose accessory for pumps Suitable for all Einhell pumps, domestic water systems and automatic water pumps Made of durable plastic Hose diameter: 25 mm Hose length: 4 m Hose connection: 42 mm (1/8 inch) internal thread Incl. adapter with 33.3 mm (1 inch) internal thread Incl. double nipple with 33.3 mm (1 inch) external thread Incl. plastic suction strainer with non-return valve

The NAKAYAMA Pro NP2230 is a complete solar-powered water pumping system, ideal for wells, water tanks and irrigation applications, especially in locations where access to the electrical grid is limited or unavailable. Powered by a 750W (1HP) motor and operating at 96V, the pump delivers a water flow rate of up to 3.8 m³/h with a maximum head of 95 metres. Its 1.25" outlet provides efficient water transfer for domestic, agricultural and professional applications. The complete set includes 3 photovoltaic panels with a total power of 1650W, a controller, a 20m pump cable and the necessary connection accessories, providing a complete solution for using solar energy to pump and transfer water. Features Solar-powered water pumping system Pump power: 750W / 1HP Operating voltage: 96V Maximum water flow: 3.8 m³/h Maximum head: 95m Outlet: 1.25" Suitable for wells and water tanks Ideal for irrigation and water transfer Powered by solar energy Supplied with 3 photovoltaic panels Total solar panel power: 1650W Ideal solution for areas without convenient access to the electrical grid