BORMANN PRO BGB1080 Petrol high-pressure water pump 196cc 6,5HP - BGB1080

The IMAS IM25-8S-180B is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The pump body is manufactured from brass and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective sleeve, stator sleeve and sealing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180B can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The IMAS IM25-4S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids free from chemicals. It is suitable for domestic central heating and air-conditioning systems, operating in both closed and open pressurized circuits. The pump provides three selectable operating speeds, with power consumption of 38W, 53W and 72W, allowing its performance to be adapted to the requirements of the installation. Its hydraulic section is manufactured from cast iron and incorporates a wet rotor motor. The motor housing is made of die-cast aluminium, while the technopolymer impeller provides reliable and durable operation. The motor shaft is manufactured from hardened stainless steel, supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protection sleeve, stator sleeve and sealing flange are also manufactured from stainless steel. Additional construction features include a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. The motor has IP44 protection and Class F insulation. The IM25-4S-180 operates from a single-phase 230V/50Hz supply, has an installation length of 180 mm and features 1½" threaded connections. Installation must be carried out with the motor shaft in a horizontal position.

The AQUASTRONG EPCP-250P is a compact submersible clean-water pump with pre-filter, designed for reliable water circulation, drainage and general water-transfer applications. It is suitable for clean or slightly dirty water and can be used for pool circulation, garden irrigation, small fountains and general clean-water transfer. The integrated pre-filter helps prevent larger debris from entering the hydraulic section of the pump, supporting dependable operation. Powered by a 250W motor, the EPCP-250P delivers a maximum flow rate of 8 m³/h (133.3 L/min) and a maximum head of 5 m. Its performance curve provides a good balance between flow and head, making it particularly suitable for applications where relatively high water circulation is required at low operating heads. Its submersible configuration provides a compact and practical solution for installations where the pump operates directly within the water.

The AQUASTRONG ECMIM2-40 is a stainless steel multistage centrifugal surface pump designed for reliable water supply, pressure boosting and water circulation in domestic, agricultural and light-commercial applications. It is suitable for household water supply, equipment support, pipeline pressurization, garden and greenhouse watering, fish farming and poultry operations, as well as water supply and circulation systems in residential and commercial installations. The ECMI series is designed for a broad range of water supply and pressure boosting applications. Powered by a 0.37kW (0.5HP) motor, the ECMIM2-40 delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 36 m. Its multistage centrifugal design provides reliable pressure performance across different flow requirements. The pump features an AISI 304 stainless steel shaft, while the motor incorporates copper windings, built-in thermal protection, Class F insulation and IP55 protection. It is suitable for liquid temperatures up to 60°C, ambient temperatures up to 50°C, operation at altitudes up to 1,000 m, and a maximum working pressure of 8 bar. The specified liquid pH range is 6.5–8.5. Comes with a 1.6 m power cable with UK plug.

The AQUASTRONG SMART2-32Z is a compact booster pump designed to increase water pressure in medium-sized commercial buildings, multi-dwelling properties, and residential applications. Featuring 4-metre self-priming capability, it offers greater installation flexibility and reliable operation even when the water source is located below the pump. With a 370W motor, a maximum head of 30 m, and a maximum flow rate of 4.5 m³/h, it delivers stable water pressure and efficient performance. The integrated Intelligent Protection system enhances operational safety while extending the pump's service life. The SMART2-32Z is suitable for installation with roof water tanks to increase water pressure for taps, showers, water heaters, and other household water outlets. It is recommended for homes between 60 and 150 m² and is designed for pumping clean water at temperatures up to 80°C.

The BORMANN Pro BGB1052 gasoline water pump is a powerful and reliable solution for irrigation, water transfer, and construction site drainage. Equipped with a robust 212cc 4-stroke engine delivering 7HP, it ensures high performance even in demanding conditions. With a maximum flow rate of 35m³/h and a maximum head of 30 meters, it is ideal for professional and agricultural use. • Power: 7HP • Engine Type: 4-stroke • Displacement: 212cc • Fuel Type: Petrol • Pump Type: Self-priming • Max Flow Rate: 35 m³/h • Max Head: 30 m • Inlet Diameter: 2" • Outlet Diameter: 2" • Oil Capacity: 0.6L • Net Weight: 24 kg • Gross Weight: 26 kg • Package Dimensions: 48.5 x 39 x 46 cm

High-quality horizontal water tanks with feet designed for safe, reliable, and efficient water storage in residential, commercial, and industrial applications. Their horizontal design and integrated support feet provide enhanced stability and secure floor installation, while the durable construction makes them suitable for domestic water storage, irrigation, and backup water supply systems.

High-quality horizontal water tanks with feet designed for safe, reliable, and efficient water storage in residential, commercial, and industrial applications. Their horizontal design and integrated support feet provide enhanced stability and secure floor installation, while the durable construction makes them suitable for domestic water storage, irrigation, and backup water supply systems.

The AQUASTRONG EKP550 is a self-priming filtration pump designed for efficient water circulation and filtration in swimming pools, spas, hot springs, and small to medium-sized pools. Its high flow capacity ensures excellent filtration performance and reliable water circulation. The pump features an integrated pre-filter that captures leaves and larger debris before they reach the impeller, protecting the pump and reducing maintenance requirements. Manufactured with durable plastic wet-end components and an aluminium motor, the EKP550 includes thermal motor protection, IPX5 protection, Class F insulation, and is rated for continuous duty (S1). Standard 1½-inch UPVC connectors provide quick and easy installation in most pool filtration systems.

The Einhell GC-DP 9035 N is a robust and powerful submersible dirty water pump designed for efficient drainage and removal of contaminated water. With a 900W motor and a maximum flow rate of 18,000 L/h (18 m³/h), it is suitable for draining flooded areas, tanks, pits, reservoirs and other applications involving dirty water. The pump provides a maximum delivery head of 9 m and a maximum delivery pressure of 0.9 bar. It can handle solid particles up to 35 mm, making it suitable for water containing larger suspended particles and debris. The GC-DP 9035 N can operate at a maximum immersion depth of 5 m and is suitable for water temperatures up to 35°C. Pump operation can start from a minimum water level of 90 mm, while shallow suction is possible down to 90 mm. Its infinitely adjustable float switch enables automatic pump operation according to the water level. The pump is also equipped with a universal connection and a 90° angle connection, providing greater flexibility during installation. A 10 m power cable allows convenient installation in tanks, pits and other submerged applications, while the 47.8 mm (G1½") pressure connection is suitable for efficient dirty-water discharge.