AQUASTRONG ECMI(m)2-30SE 0.37kW / 0.5HP Intelligent Stainless Steel Multistage Centrifugal Water Pump - AQS-ECMHM2-30-ONE

The IMAS IM25-6-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating under pressure in closed or open circuits. The pump features three selectable operating speeds, with power consumption of 46W, 67W and 93W, allowing its performance to be adjusted according to the requirements of the installation. It provides a maximum flow rate of 4.1 m³/h and a maximum head of 6 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and sealing flange are manufactured from stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-6-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

High-quality horizontal water tanks with feet designed for safe, reliable, and efficient water storage in residential, commercial, and industrial applications. Their horizontal design and integrated support feet provide enhanced stability and secure floor installation, while the durable construction makes them suitable for domestic water storage, irrigation, and backup water supply systems.

The Einhell GE-DP 900 Cut is a powerful 900W submersible dirty water pump designed for demanding drainage applications involving heavily contaminated water. Its integrated cutting system makes it particularly suitable for pumping dirty water containing fibrous and solid material. With a maximum flow rate of 16,000 L/h (16 m³/h), the pump achieves a maximum delivery head of 11.5 m and a maximum delivery pressure of 1.15 bar. It can handle foreign particles up to 35 mm in diameter. The robust construction combines die-cast aluminium and cast iron, providing high durability even under demanding operating conditions. The large 59.6 mm (2" IG) pressure connection is suitable for high-volume water discharge. The infinitely height-adjustable float switch enables automatic operation according to the water level. The pump can start from a minimum water level of 230 mm, while shallow suction is possible down to approximately 75 mm. The GE-DP 900 Cut can operate at a maximum immersion depth of 7 m and with water temperatures up to 35°C. It comes with a 10 m power cable and an ergonomic carrying handle for easier positioning and transportation.

High-quality oval oil tank with feet designed for safe, reliable, and efficient storage of heating oil in residential, commercial, and professional installations. Its oval design allows efficient use of available space, while the integrated support feet provide enhanced stability and secure floor positioning. The durable construction ensures reliable performance and long-term use.

The NAKAYAMA NP1150 is a compact 75W submersible fountain pump designed for continuous water circulation in fountains, decorative water features and similar indoor or outdoor applications. With a maximum flow rate of 2,600 L/h (2.6 m³/h), the pump achieves a maximum head of 2.6 m and a maximum pressure of 0.26 bar, providing efficient water circulation for small fountains and decorative installations. The NP1150 is designed for 100% silent operation, making it suitable for applications where low noise levels are important. It can be used in both indoor and outdoor environments. The pump operates on a 220V / 50Hz power supply and can be installed at a maximum depth of 3 m. Its compact dimensions of 23 × 23 × 19 cm allow easy integration into a variety of fountain and water-feature installations.

The AQUASTRONG EPCP-250P is a compact submersible clean-water pump with pre-filter, designed for reliable water circulation, drainage and general water-transfer applications. It is suitable for clean or slightly dirty water and can be used for pool circulation, garden irrigation, small fountains and general clean-water transfer. The integrated pre-filter helps prevent larger debris from entering the hydraulic section of the pump, supporting dependable operation. Powered by a 250W motor, the EPCP-250P delivers a maximum flow rate of 8 m³/h (133.3 L/min) and a maximum head of 5 m. Its performance curve provides a good balance between flow and head, making it particularly suitable for applications where relatively high water circulation is required at low operating heads. Its submersible configuration provides a compact and practical solution for installations where the pump operates directly within the water.

The AQUASTRONG SMART3-45 is a compact commercial booster pump designed to deliver reliable water pressure for medium-sized commercial buildings and multi-dwelling installations. Powered by a 750W motor, it provides consistent performance and dependable operation for demanding water boosting applications. With a maximum head of 45 m and a maximum flow rate of 5.5 m³/h, it ensures efficient water distribution and excellent hydraulic performance. The integrated Intelligent Protection system safeguards the motor during operation, enhancing reliability and extending the pump's service life. Designed for clean water applications, the SMART3-45 handles liquid temperatures up to 95°C while maintaining a low operating noise level of only 50 dB, making it an excellent choice for commercial installations requiring quiet operation.

The AQUASTRONG EPS-02 is an automatic electronic pressure controller designed to provide convenient and reliable automatic control of compatible water pumps. It automatically manages pump operation according to water demand, making it suitable for domestic water supply, pressure boosting, irrigation and other clean-water pumping systems. A key feature of the EPS-02 is its adjustable starting pressure. The supplied specification shows a 1.5 bar starting pressure setting, while AQUASTRONG product documentation identifies the EPS-02 as an adjustable version with a starting-pressure range of approximately 1.5–3 bar. The controller supports a maximum pump power of 1.1kW and maximum current of 10A. It has a maximum operating pressure of 10 bar, while its IP65 protection rating provides protection suitable for demanding water-pump installations. The EPS-02 uses an R1" connection thread according to the supplied technical data and can operate at temperatures up to 60°C. Its automatic operation makes it a practical solution for converting a compatible conventional water pump into an automatically controlled pressure-boosting system.

Water storage tanks provide a safe, reliable, and efficient solution for storing clean water in residential, commercial, and industrial applications. Designed for durability and hygienic water storage, they help ensure a continuous water supply and are suitable for a wide range of applications, from domestic use and irrigation to backup water supply systems.

Water storage tanks provide a safe, reliable, and efficient solution for storing clean water in residential, commercial, and industrial applications. Designed for durability and hygienic water storage, they help ensure a continuous water supply and are suitable for a wide range of applications, from domestic use and irrigation to backup water supply systems.