NAKAYAMA PRO SP1315 Submersible sewage pump with cutting impeller 1300W, 18.000 L/h - SP1315

The AQUASTRONG SMART6-45 is a high-performance commercial booster pump designed for commercial buildings, apartment complexes, and large water supply systems. Equipped with a variable-speed permanent magnet motor, it automatically adjusts its performance to system demand, ensuring constant water pressure, outstanding energy efficiency, and reduced power consumption. Featuring a 1100W motor, a maximum head of 45 m, and a maximum flow rate of 16 m³/h, it is ideal for demanding water boosting applications requiring high flow and pressure. Its cast iron housing provides excellent durability, while the integrated Intelligent Protection system enhances operational safety and extends the pump's service life. Designed for clean water applications, the SMART5-45 handles liquid temperatures up to 95°C and operates at a low noise level of 50 dB, making it a reliable solution for continuous commercial use.

Submersible pump for clear water. 250 l/minThis compact electric water pump is suitable for pumping water from a well, for example. A handy tool for pumping water out of indoor premises. Easy to set up, with a capacity of 250 l/min.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The AQUASTRONG SMART2-42 is a compact commercial booster pump designed to provide reliable water pressure for medium-sized commercial buildings and multi-dwelling installations. Its powerful 550W motor delivers stable performance, high efficiency, and dependable operation for demanding water boosting applications. With a maximum head of 42 m and a maximum flow rate of 4.5 m³/h, it is an ideal solution where higher water pressure is required. The integrated Intelligent Protection system safeguards the motor during operation, improving reliability and extending service life. Suitable for clean water applications, the SMART2-42 handles liquid temperatures up to 95°C while maintaining a low operating noise level of only 50 dB, making it an excellent choice for commercial environments where quiet operation is important.

The AQUASTRONG ECMIM4-50 is a stainless steel multistage centrifugal surface pump designed for reliable water supply, pressure boosting and water circulation in domestic, agricultural and light-commercial applications. It is suitable for household water supply, equipment support, pipeline pressurization, garden and greenhouse watering, fish farming and poultry operations. The ECMI series is also suitable for water supply and drainage systems, high-rise buildings, central air-conditioning and centralized heating circulation systems. Powered by a 0.75kW (1HP) motor, the ECMIM4-50 delivers a maximum flow rate of 7 m³/h (117 L/min) and a maximum head of 50 m. Its multistage centrifugal design combines high flow capacity with strong pressure performance, making it suitable for installations with increased water demand and pressure requirements. The pump features an AISI 304 stainless steel shaft, while the motor incorporates copper windings, built-in thermal protection, Class F insulation and IP55 protection. It is suitable for liquid temperatures up to 60°C, ambient temperatures up to 50°C, operation at altitudes up to 1,000 m, and a maximum working pressure of 8 bar. Comes with a 1.6 m power cable with UK plug.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The AQUASTRONG EPCP-250P is a compact submersible clean-water pump with pre-filter, designed for reliable water circulation, drainage and general water-transfer applications. It is suitable for clean or slightly dirty water and can be used for pool circulation, garden irrigation, small fountains and general clean-water transfer. The integrated pre-filter helps prevent larger debris from entering the hydraulic section of the pump, supporting dependable operation. Powered by a 250W motor, the EPCP-250P delivers a maximum flow rate of 8 m³/h (133.3 L/min) and a maximum head of 5 m. Its performance curve provides a good balance between flow and head, making it particularly suitable for applications where relatively high water circulation is required at low operating heads. Its submersible configuration provides a compact and practical solution for installations where the pump operates directly within the water.

The 80L horizontal pressure tank is designed for use in water supply, booster and pump systems, helping maintain stable system pressure and reduce frequent pump starts and stops. With its 80-litre capacity and horizontal configuration, it provides a practical solution for installations where the pump is mounted on or near the tank. The pressure tank stores water under pressure and helps absorb pressure fluctuations, contributing to smoother system operation, reduced pump wear and reliable water supply.

The IMAS IM25-8S-180B is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The pump body is manufactured from brass and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective sleeve, stator sleeve and sealing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180B can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The Einhell 1300W Submersible Dirty Water Pump is a high-performance solution designed for demanding drainage and dirty-water pumping applications. With a powerful 1300W motor and maximum flow rate of 23,000 L/h (23 m³/h), it is suitable for rapidly removing large volumes of water from flooded areas, tanks, pits and other drainage applications. The pump provides a maximum delivery head of 10 m and maximum pressure of 1 bar. Its ability to handle solid particles up to 40 mm makes it particularly suitable for heavily contaminated water containing larger suspended particles and debris. Designed for submerged operation, the pump can operate at a maximum immersion depth of 5 m and handle water temperatures up to 35°C. For high-volume discharge, it features a large 59.6 mm (2" IG) pressure connection. The supplied 10 m power cable provides additional flexibility when installing the pump in tanks, pits and other submerged locations.