Oval diesel tank with feet 1000L – NT1000L/P/D

The Einhell GC-DP 9035 N is a robust and powerful submersible dirty water pump designed for efficient drainage and removal of contaminated water. With a 900W motor and a maximum flow rate of 18,000 L/h (18 m³/h), it is suitable for draining flooded areas, tanks, pits, reservoirs and other applications involving dirty water. The pump provides a maximum delivery head of 9 m and a maximum delivery pressure of 0.9 bar. It can handle solid particles up to 35 mm, making it suitable for water containing larger suspended particles and debris. The GC-DP 9035 N can operate at a maximum immersion depth of 5 m and is suitable for water temperatures up to 35°C. Pump operation can start from a minimum water level of 90 mm, while shallow suction is possible down to 90 mm. Its infinitely adjustable float switch enables automatic pump operation according to the water level. The pump is also equipped with a universal connection and a 90° angle connection, providing greater flexibility during installation. A 10 m power cable allows convenient installation in tanks, pits and other submerged applications, while the 47.8 mm (G1½") pressure connection is suitable for efficient dirty-water discharge.

High-quality expansion vessel base designed to provide secure and stable support for expansion vessels used in small closed heating systems. Its robust and practical design ensures proper positioning of the expansion vessel, contributing to a safe and organized installation while supporting the reliable operation of the heating system.

The AQUASTRONG ECMIm2-40 is an Intelligent stainless steel multistage centrifugal surface pump designed for pressure boosting, household water supply, automatic irrigation and other clean-water applications. Its integrated PCL microcomputer chip provides intelligent pump control according to water demand. The system features automatic start and stop, delay-start protection and no-water protection, providing convenient automatic operation while helping protect the pump against unsuitable operating conditions. Powered by a 0.37kW (0.5HP) single-phase motor, the ECMIm2-40 delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 36 m. Its multistage hydraulic design provides consistent pressure performance across a wide range of flow requirements. The motor features copper windings, built-in thermal protection, Class F insulation and IPX4 protection. The pump is suitable for transferring clean water or other liquids with similar physical and chemical properties, with a liquid temperature range of 4–60°C, maximum ambient temperature of 50°C, and maximum working pressure of 10 bar. Comes with a 1.6 m power cable with UK plug.

High-quality horizontal water tanks with feet designed for safe, reliable, and efficient water storage in residential, commercial, and industrial applications. Their horizontal design and integrated support feet provide enhanced stability and secure floor installation, while the durable construction makes them suitable for domestic water storage, irrigation, and backup water supply systems.

The Einhell GC-DW 1300 N is a powerful and reliable deep well pump designed for pumping clean water from wells, boreholes, cisterns and other deep water sources. With a powerful 1300W motor, it delivers a maximum flow rate of 5,000 L/h (5 m³/h) and a maximum delivery head of 65 m. Its high delivery pressure of up to 6.5 bar makes the pump particularly suitable for applications where water needs to be transported over considerable vertical distances, such as garden irrigation and domestic water supply from deep wells. The pump features a durable corrosion-resistant stainless steel housing designed for long service life. It is equipped with an external switch box and two suspension eyelets for secure installation in a well or borehole. The GC-DW 1300 N can operate at a maximum immersion depth of 20 m and is suitable for water temperatures up to 35°C. The robust 47.8 mm (G1½" IG) pressure connection provides a reliable connection to the delivery pipework.

Submersible pump for clear water. 250 l/minThis compact electric water pump is suitable for pumping water from a well, for example. A handy tool for pumping water out of indoor premises. Easy to set up, with a capacity of 250 l/min.

The Einhell GC-SP 2275 is a compact and efficient 220W submersible clear water pump designed for pumping clean or slightly contaminated water from tanks, rainwater reservoirs, flooded basements and other water collection areas. With a maximum flow rate of 7,500 L/h (7.5 m³/h), the pump achieves a maximum delivery head of 6 m and a maximum delivery pressure of 0.6 bar. It can handle small particles up to 5 mm in diameter. The infinitely adjustable float switch enables automatic operation according to the water level, while the pump can start from a minimum water level of 25 mm. Its shallow suction capability allows the remaining water level to be reduced to approximately 5 mm. The pump housing is manufactured from impact-resistant plastic and features a high-quality mechanical seal for reliable operation and long service life. A practical folding carrying handle makes transportation and storage easier. The GC-SP 2275 features a 47.8 mm (G1½" IG) pressure connection and includes connections for 25 mm and 32 mm hoses, as well as threaded connection options. It comes with a 10 m power cable for flexible installation.

The AQUASTRONG ECMIM4-60 is a stainless steel multistage centrifugal surface pump designed for reliable water supply, pressure boosting and water circulation in domestic, agricultural and commercial applications. It is suitable for household water supply, equipment support, pipeline pressurization, garden and greenhouse watering, fish farming and poultry operations. The ECMI series can also be used for industrial water supply and drainage, high-rise buildings, central air-conditioning and centralized heating circulation systems. Powered by a 1.1kW (1.5HP) motor, the ECMIM4-60 delivers a maximum flow rate of 7 m³/h (117 L/min) and a maximum head of 61.5 m. Its multistage centrifugal design combines high flow capacity with strong pressure performance, making it particularly suitable for installations with increased water demand and higher pressure requirements. The pump features an AISI 304 stainless steel shaft and is suitable for liquid temperatures up to 60°C, ambient temperatures up to 50°C, operation at altitudes up to 1,000 m, and a maximum working pressure of 8 bar. The motor features copper windings, built-in thermal protection, Class F insulation and IP55 protection. Comes with a 1.6 m power cable with UK plug.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The IMAS IM32-10S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in closed or open pressurized circuits. The pump features three selectable operating speeds, with power consumption of 150W, 210W and 270W, allowing its performance to be adjusted according to the requirements of the heating or circulation system. It provides a maximum head of 10 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are manufactured from stainless steel. Additional construction features include a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM32-10S-180 can operate with liquid temperatures up to 110°C and at a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1¼" threaded connections and must be installed with the motor shaft in a horizontal position.