Oval diesel tank 1000L - NT1000L/D/O

High-quality horizontal water tanks with feet designed for safe, reliable, and efficient water storage in residential, commercial, and industrial applications. Their horizontal design and integrated support feet provide enhanced stability and secure floor installation, while the durable construction makes them suitable for domestic water storage, irrigation, and backup water supply systems.

Water storage tanks provide a safe, reliable, and efficient solution for storing clean water in residential, commercial, and industrial applications. Designed for durability and hygienic water storage, they help ensure a continuous water supply and are suitable for a wide range of applications, from domestic use and irrigation to backup water supply systems.

The IMAS IM25-6-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating under pressure in closed or open circuits. The pump features three selectable operating speeds, with power consumption of 46W, 67W and 93W, allowing its performance to be adjusted according to the requirements of the installation. It provides a maximum flow rate of 4.1 m³/h and a maximum head of 6 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and sealing flange are manufactured from stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-6-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The AQUASTRONG ESSWm75A is a heavy-duty submersible sewage pump designed for the efficient discharge of wastewater, rainwater and sewage containing solid particles. It is suitable for residential properties, hospitals, municipal drainage systems, construction sites and other demanding wastewater applications. Powered by a 0.55kW (0.75HP) single-phase motor, the ESSWm75A delivers a maximum flow rate of 16 m³/h and a maximum head of 13.5 m. Its hydraulic design allows the passage of solid particles up to 25 mm, making it suitable for wastewater containing suspended solids. The pump combines a stainless steel outer shell and AISI 304 stainless steel shaft with a durable HT200 cast-iron pump body and impeller, providing strength and durability for demanding submerged applications. For dependable operation, the motor features built-in thermal overload protection, Class F insulation and IPX8 protection. The sealing system incorporates SiC, graphite and ceramic components with NBR gaskets, while an oil chamber provides additional protection for the mechanical seal. The automatic version incorporates a float switch for automatic start and stop according to the water level. Comes with a 10 m power cable.

Expansion vessels with legs are essential components in heating and hydraulic systems, designed to absorb the expansion of water caused by temperature changes and help maintain stable system pressure. Their integrated support legs provide stable floor installation, while the vessel helps compensate for variations in water volume, prevent excessive pressure build-up, reduce stress on system components, and support reliable and efficient operation.

The AQUASTRONG EPS-01-2.2 is an automatic electronic pressure controller designed to automate the start and stop operation of compatible water pumps according to water demand. It is suitable for domestic water supply, pressure boosting, irrigation and other clean-water pumping systems. This 2.2 bar version is preset to start the connected pump when system pressure drops to approximately 2.2 bar. AQUASTRONG documentation confirms that the EPS-01 series is available with different preset starting pressures, including 2.2 bar. According to the supplied specifications, the EPS-01-2.2 operates at 110–240V, 50/60Hz, supports a maximum current of 10A and a maximum connected power of 1.5kW. It is rated for a maximum operating pressure of 10 bar and a maximum operating temperature of 60°C. The controller features IP65 protection and an integrated pressure gauge for convenient monitoring of system pressure. The standard connection thread is G1", while G1¼", G1½" and NPT1" connections are listed as optional configurations. Its automatic operation provides a compact and convenient solution for converting a compatible conventional water pump into an automatically controlled pressure-boosting system.

The AQUASTRONG EKS-1100SE is a stainless steel multistage submersible water pump designed for domestic and light-commercial drainage and water-transfer applications. It is suitable for clean and slightly dirty water, providing a reliable solution for tanks, basements, rainwater systems, irrigation and emergency water removal. Powered by a 1100W (1.5HP) motor, the EKS-1100SE delivers a maximum flow rate of 6 m³/h (100 L/min) and a maximum head of 45 m. Its multistage hydraulic design provides increased lifting capability while maintaining a practical flow rate for water-transfer applications. AQUASTRONG catalogue data also specifies 45 m maximum head and up to approximately 5 m³/h at the lower end of the performance curve. The pump features a stainless steel multistage construction, IPX8 protection, Class F insulation and built-in thermal motor protection. Its 1" outlet allows connection to suitable pipework, while the integrated float switch provides automatic start and stop according to the water level. Suitable for liquid temperatures up to 35°C, the EKS-1100SE is designed for fully submerged operation and can operate at a maximum immersion depth of 12 m according to the supplied model specifications. Comes with a 15 m power cable.

The Einhell GC-DP 5010 G is a robust 500W submersible dirty water pump designed for a wide range of drainage applications. It is suitable for emptying rain barrels, collecting containers, tanks, flooded areas and other locations where dirty water needs to be removed efficiently. With a maximum flow rate of 12,000 L/h (12 m³/h), the pump delivers a maximum head of 8 m and a maximum delivery pressure of 0.8 bar. It can handle foreign particles up to 10 mm, making it suitable for dirty water containing small solid particles. The pump features a durable construction with a cast iron housing section and stainless steel motor housing. A high-quality mechanical seal contributes to reliable operation and long service life. The infinitely height-adjustable float switch provides automatic operation according to the water level. An integrated carrying handle makes the pump easier to transport and position. The GC-DP 5010 G features a 42 mm (G1¼" IG) pressure connection and includes adapters for 38 mm (1½"), 32 mm (1¼") and 25 mm (1") hoses. It comes with a 10 m power cable for flexible installation.

The AQUASTRONG EF-01B is a water level float switch designed for the automatic start and stop control of compatible water pumps according to liquid level. It is suitable for water tanks, reservoirs, drainage systems and other applications requiring automatic liquid-level control. The balance block allows the float's operating position and switching range to be adjusted during installation, providing greater flexibility according to the required minimum and maximum water levels. This version comes with a 10 m H07-RN-F cable, making it particularly suitable for installations where a longer cable length is required. AQUASTRONG technical documentation lists 10 m as one of the available cable lengths for the EF-01B, together with electrical ratings of 16(8)A / 250V and 16(14)A / 125V. The EF-01B is designed for a service life of approximately 5,000 operating cycles. Its operating limits allow use with liquids at temperatures up to 35°C and a maximum ambient temperature of 40°C.