BORMANN PRO Battery charger 12/24V 3.5A - BBC4020

Intelligent battery charger with microprocessor controller Multi-step charging cycle, contr. and monitored by microprocessor Universal battery charger for various battery types For Gel, AGM, zero and low maintenance lead-acid batteries 2in1: Charging and jump starting with one item Trickle charge function for a continuously ideal charge status Optimal for season.vehicles with long idle times(convert./m-bike) Charging provides extended battery life LED battery voltage and charging progress display Electr. protec. against overcharging, short-circuit&swapped poles Fully insulated battery clamps Ergonomic handle for optimum transportation

TECHNICAL DATA AND INFORMATION Robust cyclical behaviour with E2 classification pursuant to EN 50342-1 Double Top lid for twice the leak protection 100% leak protection up to an angle of 55° Absolutely maintenance-free due to modern calcium technology Extensive coverage of the European and Asian vehicle fleets owing to 30 battery types from 40-110 Ah V2 Vibration resistance rating pursuant to EN 50342-1 due to the bonding of the plates to the battery floor and robust cell connections Improved backfire and ESD safety levels (against electrostatic discharge)  

Battery Charger - Car Booster from BORMANN PRO Battery charger and car booster featuring a 10s LCD display with detailed error codes for any abnormall processes and a dedicated repair mode for 12v batteries. Alternator check function CCA & Automatic All type of 12/24V lead-acid batteries (WET/MF/CA/EFB/GEL/AGM) Output: 12/24VDC, 5/10/20ABattery capacity: 350Ah Lowest Chargeable Voltage: 3V  

Intelligent battery charger with microprocessor controller Multi-stage charging cycle,controlled/monitored by microprocessor Universal battery charger for various battery types For gel, AGM, zero and low maintenance lead-acid batteries Protection class IP65: Dustproof and protected against water jets Trickle charge function for a continuously ideal charge status For vehicles with long idle times (convertibles/motorcycles) Charging provides extended battery life Winter charging mode for outdoor temperatures below 5°C Recondition mode for charging deeply discharged batteries Power supply mode LCD battery voltage and charging progress display El. protection against overcharging, short-circuit, swapped poles Fully insulated battery clamps Suspension eyelet for mounting to the wall

All-insulated construction Overload-, fals poling- and short circuit protection Sheet steel housing Carrying handle Turn-switch for quick/normal load+setting of the required voltage Built-in ammeter Mains cable with europe plug Charging leads with sturdy pole clamps

The Mercury IMS600-12 is a high-efficiency 12V DC to 230V AC power inverter with a continuous output power of 600W, ideal for camping, commercial vehicles, vans, lorries and backup power use during power outages. Using modified sine wave technology, it can power a range of everyday appliances such as TVs, lights, fans, small electrical devices and other compatible equipment, provided they are within the inverter’s output power rating. With over 85% efficiency, a soft start function and multiple safety protections, this inverter is designed for reliable and practical use. It features protection against low or over input voltage, short circuit, overload and overheating. The built-in USB 1A socket allows charging of small electronic devices, while the LED and audible fault indicators provide clear alerts in case of operating issues. Supplied with 1 pair of 800mm DC power cables and a spare blade fuse. Features • 12V DC to 230V AC conversion: Powers mains equipment from a 12V battery or DC power supply • 600W continuous power: Suitable for various compatible everyday appliances • Modified sine wave output: Suitable for standard compatible electrical devices • Over 85% efficiency: Provides efficient power conversion • Soft start function: Helps minimise inverter shutdown with larger starting loads • Built-in USB 1A socket: Suitable for charging small electronic devices • Low/over voltage input protection: Helps protect the inverter and connected devices • Short circuit, overload and overheat protection: For safer operation • LED and audible fault indicator: Provides warning in case of faults • Ideal for camping and vehicles: Suitable for vans, lorries, outdoor use and backup power

Compact, handy jump start and power bank High capacity 3 x 3700 mAh lithium polymer battery LED charge status indicator LED work light (steady on, strobe light & SOS emergency signal) 12V/200A jump start function for empty/discharged car batteries For Petrol up to 4,000 ccm and Diesel up to 2,000 ccm Jump start cable with insulated clamps and overload protection Portable power supply for charging cell phones, laptops, cameras USB 5V / 2A output and Speed Charging output 12V / 10A output for car compressor/inflator, etc. 19V / 3.5A output for notebooks/laptops, etc. Incl. USB adapter cable (Micro/Mini USB) Incl. adapter cable with 9 different notebook adapters Incl. 230V charging adapter Supplied in practical protective storage case

AUTOSTYLE Car Battery Jumper Cables 1200AMP (2 x 2.5m) – 9MBC-1200 Features: 1200A jumper cables, length 2 x 2.5 meters, safe vehicle starting

The MILWAUKEE M18JS2000-0 M18 Car Jump Starter is a portable battery-powered starting device designed to help restart vehicles with discharged 12V batteries. Delivering a peak starting current of 2000A, it is suitable for petrol engines up to 8.1 liters and diesel engines up to 3.0 liters, making it a practical solution for workshops, fleet maintenance and roadside assistance. Powered by the MILWAUKEE M18 18V battery system, the jump starter features an Always-Ready capacitor system that eliminates the need for pre-charging. Once connected to a compatible M18 battery, the device can be ready for jump starting in under 70 seconds. Its integrated digital display provides voltage readings, while the 500-lumen LED work light helps illuminate the engine compartment in low-light conditions. Designed for demanding working environments, the M18JS2000-0 incorporates reverse polarity protection, spark-proof technology and overheating protection for added safety during operation. Weighing 3.4 kg, it offers a portable solution for professional mechanics, technicians and vehicle maintenance applications. The SOLO version is supplied as a bare unit without a battery or charger. Features Portable jump starter powered by the MILWAUKEE M18 18V battery system Peak starting current of 2000A Designed for jump starting vehicles with 12V electrical systems Suitable for petrol engines up to 8.1 liters Suitable for diesel engines up to 3.0 liters Always-Ready capacitor system eliminates the need for pre-charging Ready for jump starting in under 70 seconds when powered by a compatible M18 battery Reverse polarity protection against incorrect clamp connections Spark-proof design for additional protection during battery connection Overheating protection for demanding working conditions Integrated digital display for voltage readings Built-in 500-lumen LED work light for improved visibility Portable design suitable for workshops, roadside assistance and fleet maintenance Compatible with the MILWAUKEE M18 battery platform SOLO version supplied without battery or charger

Compact, handy jump start and power bank High capacity 3 x 2500 mAh lithium polymer battery LED charge status indicator LED work light (steady on, strobe light & SOS emergency signal) 12V/200A jump start function for empty/discharged car batteries Occasional jump starting for petrol engines up to 3,000 ccm Jump start cable with insulated clamps and overload protection Portable power supply for charging cell phones, tablets, cameras. USB 5V / 2A output and Speed Charging output Incl. USB adapter cable (Micro/Mini/Type C USB) Incl. Speed Charging Cable (USB Charging Cable) Supplied in practical protective storage case