KAOKEY Electronic fly trap 140x68x41mm

The KAOKEY Electronic Fly Trap is a compact plug-in insect trap designed for indoor use. It uses UVA light to attract flying insects toward a replaceable adhesive board, where they are trapped without the use of insecticides or chemical repellents.

With a power consumption of only 0.8W, the device is suitable for continuous everyday use in areas such as kitchens, living rooms, bedrooms, offices and shops. Its silent operation makes it especially convenient for spaces where noise should be kept to a minimum.

The unit plugs directly into a wall socket and features touch ON/OFF control. The body can rotate up to 90° for more flexible positioning depending on the orientation of the socket. Maintenance is simple: remove the protective film from the adhesive board, insert it into the device with the adhesive side facing forward, and replace it when it becomes covered with insects.

Features

• Electronic fly and flying-insect trap

• Uses UVA light and adhesive board

• UVA wavelength: 395 nm

• No insecticides or chemical repellents required

• Silent operation

• Low power consumption: 0.8W

• Plug-in design

• Touch ON/OFF control

• 90° rotatable design for flexible socket positioning

• Replaceable adhesive board

• Hygienic insect trapping on adhesive surface

• Compact and discreet design

• Suitable for continuous everyday indoor use

• Suitable for kitchens, living rooms, bedrooms, offices and shops

• No batteries required

• Easy installation and maintenance

Directions for Use

1. Close nearby windows and doors before operation for more effective indoor use.

2. Remove the protective film from the adhesive board.

3. Insert the adhesive board into the device with the sticky side facing forward.

4. Plug the device into a suitable wall socket.

5. Press the ON button to activate the unit.

6. Rotate the unit up to 90° if needed to suit the orientation of the socket.

7. Replace the adhesive board when it becomes saturated with insects.