ISOMAT ISOFLEX Waterproofing membrane for flat roofs 13kg - White

VITEX HYROOF PRIMER is a hybrid water-based polyurethane primer specially designed for preparing surfaces that will be waterproofed with HYROOF HYBRID PU. It penetrates, waterproofs and stabilises both new surfaces and older substrates with existing waterproofing layers. It provides strong adhesion to concrete, bituminous membranes, cement boards, old insulation systems, acrylic coatings and polyurethane paints. Its lightly tinted, semi-transparent formulation makes it easier to identify the areas that have already been primed, helping ensure uniform application across the entire surface. It is supplied ready to use, is easy to apply and contains very low levels of Volatile Organic Compounds, making it more user- and environmentally friendly. Key Benefits Hybrid water-based polyurethane primer Ideal before applying HYROOF HYBRID PU Penetrates and stabilises the substrate Helps waterproof the surface Strong adhesion to a wide range of substrates Suitable for new and existing waterproofing systems Lightly tinted for easy application control Semi-transparent finish Ready to use No dilution required Very low VOC content Can be applied with a roller, brush, masonry brush or airless spray gun Suitable for preparing roof waterproofing surfaces

COLOR: White  COVERAGE: 8-12 m²/lit/coat. PACKAGING:  10 lit.

Coverage (m²): 1,5-1,8 kg  Ready to use  Colour : dark grey  Drying Time: 4hrs

COLOR: White CONSUMPTION: 1.0-1.5 kg/m². PACKAGING: 1 kg.

COLOR: Black CONSUMPTION: 120-130 g/m of joint length, for joints 1 cm x 1 cm. PACKAGING: 5 kg. Trowel-applied bituminous compound suitable for sealing horizontal joints, for sealing joints in complex detail areas where it is difficult to apply bituminous sheet membranes (e.g. gutters, flashings, parapets, vents, etc.), and for bonding bituminous roof shingles.

Black Jack Self Adhesive Flashing with natural lead-look finish. Each roll contains a 250ml tin of primer. EVERBUILD® BLACK JACK® FLASHING TAPE FLASH is a strong self-adhesive flashing tape comprising of an aluminium foil and a bitumen rubber adhesive. The adhesive forms a strong waterproof seal simply by pressing the tape into place by hand. USES ▪ General repair to existing flashing. ▪ Flashing bituminous felt and similar roofs. ▪ Flashing parapet walls. ▪ Replacement of lost lead flashing. ▪ Repairs to cracks in concrete. ▪ Repairs to lead gutters. ▪ Sealing capping bolts in roof sheets. ▪ Sealing roof ridges. ▪ Protective coating to insulation materials. ▪ Sealing projections through roofs and similar sections. ▪ Flashing between timber and brickwork or blockworkor blockwork cavities. ▪ Flashing of skylights CHARACTERISTICS / ADVANTAGES ▪ Replaces need for lead flashing. ▪ Self-adhesive - requires no separate glue. Black Jack Flash Diy 3m Lead Look 225mm x 3m

ISOMAT PSF 60 is a non-woven spunlace fabric manufactured from virgin PET polyester, with a weight of 60 g/m². It is used for the local or full-surface reinforcement of liquid-applied waterproofing membranes, particularly on surfaces affected by multiple, localised or widespread cracks. The fabric is embedded into the waterproofing layer, improving the mechanical strength of the system and reinforcing critical areas such as cracks, joints, corners and floor-to-wall connections. It is suitable for use with waterproofing products including ISOFLEX-PU 500, ISOFLEX, ISOFLEX-AEGEAN, ISOFLEX-HYBRID and AQUAMAT-ELASTIC. It is especially recommended for reinforcing ISOFLEX-PU 500 waterproofing systems. Key Benefits Manufactured from virgin PET polyester Non-woven spunlace construction Reinforces liquid-applied waterproofing membranes Suitable for local or full-surface reinforcement Ideal for surfaces with multiple cracks Reinforces cracks, joints, corners and connection points High tensile strength Excellent flexibility and elongation before breaking Compatible with various waterproofing systems Ideal for use with ISOFLEX-PU 510