VITEX ACRYLAN MAX Ultra durable nano-acrylic paint 3L white
VITEX Acrylan MAX is an innovative, highly durable matt paint designed for exterior masonry surfaces. It is based on advanced TRIBRID NANO TECHNOLOGY, combining silica, acrylic and silicone technologies.
Its advanced formulation provides superior protection against adverse weather conditions, rain, humidity and airborne pollutants. It helps maintain cleaner, brighter and more colour-stable façades by reducing the accumulation of inorganic, organic and biological contaminants, including fungi and algae.
Its strong inorganic base allows painted surfaces to dry quickly after exposure to rain while maintaining excellent breathability. Thanks to its outstanding adhesion, it can be applied to new and previously painted plaster, concrete, silicate coatings, silicone coatings and ETICS external thermal insulation systems following the appropriate preparation.
Its wide application temperature range, fast drying time and short recoating interval help reduce weather-related delays and extend the exterior painting season.
Advantages
- Tribrid Silica – Acrylic – Silicone nanotechnology
- Exceptional resistance to adverse weather conditions
- Enhanced protection against the effects of climate change
- Suitable for application across a wide temperature range
- Extends the exterior painting season
- Outstanding durability and adhesion
- High resistance to rain marks and atmospheric pollution
- Reduces the accumulation of fungi, algae and biological contaminants
- Excellent colour stability
- Very high surface breathability
- Rapid drying after rain or exposure to moisture
- Low carbon footprint throughout its life cycle
- Long service life and reduced maintenance requirements
- Certified cool paint
- Specially reinforced HD shades for maximum durability
- Smooth matt finish
Cool Paint Properties
Acrylan MAX has been certified by the Department of Physics of the National and Kapodistrian University of Athens for its cool paint properties. It features:
- High solar reflectance
- High thermal emittance
- High Solar Reflectance Index
Technical Specifications
- Type: Tribrid nano-acrylic paint
- Technology: Silica – Acrylic – Silicone
- Application: Exterior surfaces
- Finish: Matt
- Coverage per coat: 15–17 m²/L
- Coverage for two coats: 8–9 m²/L
- Dilution: Up to 10% with water
- Touch-dry time: 30–45 minutes at 25°C and 50% relative humidity
- Recoat time: 1–2 hours at 25°C and 50% relative humidity
- Density: 1.28 ± 0.02 kg/L for white
- Viscosity: 110 ± 5 KU at 25°C
- Gloss level: Less than 5 units at 60°
- Application method: Roller, brush or airless spray gun
- Colours: White and more than 4,500 shades through the Vitex Coloring System
Suitable Surfaces
Suitable for new and previously painted surfaces including:
- Plaster
- Concrete
- Brickwork
- Skim-coated surfaces
- Existing silicate coatings
- Existing silicone coatings
- ETICS external thermal insulation systems
Surface Preparation
Surfaces must be clean, dry and smooth, free from dust, grease, oil and loose or flaking materials.
Acrylic Putty may be used to fill holes and repair cracks.
Previously painted surfaces should preferably be primed with Vitosin. Existing silicate or silicone-coated surfaces may be primed using Acrylan MAX diluted by 15%.
New plaster, concrete, brick or skim-coated surfaces should be primed with Durovit or Acrylan Unco Eco.
For dark or intense final colours, the application of Vitex PreColor Primer tinted according to the selected finishing shade is recommended.
Application Instructions
- Dilute the product with up to 10% clean water.
- Stir thoroughly before use.
- Apply the first coat using a roller, brush or airless spray gun.
- Apply the second coat after 1–2 hours.
Application Conditions
- It may be applied when the temperature of the air, surface and product is between 5°C and 45°C at approximately 50% relative humidity.
- Maximum permitted relative humidity during application is 80%.
- Drying and recoating times depend on temperature, humidity, wind conditions and film thickness.
- Depending on the selected shade and application conditions, painting may be completed approximately 30–60 minutes before expected rain or dew.
- Lower temperatures and higher humidity may increase the time required for rain resistance.
- New plaster or cement surfaces should be allowed to dry thoroughly for at least 30 days before application.
Additional Information
- Painted surfaces may be cleaned at least three weeks after application.
- Use a soft sponge and water.
- A mild, colourless detergent may be used for persistent stains.
- Clean tools immediately after use with water and, when necessary, soap or detergent.
- The product should be tinted exclusively through the Vitex Coloring System using the recommended tinting base.
Packaging
- White: 750 ml, 3 L and 10 L
- Tinting bases: 1 L, 3 L and 10 L
Technical Specifications
Τεχνικές Προδιαγραφές
- Home delivery from Monday to Friday, with a maximum processing time of five (5) calendar working days.
- BoxNow service available for selected items with a maximum processing time of five (5) calendar working days. In case of increased order volume, there is a possibility of delay.
- Receiving from ACS Courier stores with a maximum processing time of seven (7) calendar working days. In case of increased order volume, there is a possibility of delay.
- Receiving from the Company's store in Limassol with a maximum waiting time of twenty-four (24) working hours. The Company will contact you when your order is ready for receipt. You can receive your order from the reception area of the Company's store. To receive your order, you must provide your order number, which you will find in the email that will be sent to you by the Company upon the completion of your order. Receipts from the Company's store are made from Monday to Friday from 08:00 - 20:00, Saturday from 08:00 - 19:00 and Sunday from 10:00 - 19:00.
Click here for more information on shipping costs.
For your convenience and service, the online store of the Company accepts Visa, Mastercard & Maestro credit cards.
