VITEX METAL PRIMER Primer for Metal Surfaces 750ml
Surface Preparation Metal Primer is a high-quality primer based on hard, quick-drying alkyd resins. It creates an ideal substrate for enamel paints, particularly when applied to metal and wooden surfaces.
It provides excellent adhesion, whiteness and hiding power while helping create a smooth and even finish. The formula offers good brushability, excellent levelling properties and easy sanding after drying.
It can also be used for wall preparation, helping insulate and cover patches, spots, stains and other surface imperfections before the application of the topcoat.
The primer can be applied by brush, roller or spray gun and is available in white and grey.
Advantages
- Primer based on quick-drying alkyd resins
- Suitable for metal and wooden surfaces
- Can also be used for wall preparation
- Provides excellent topcoat adhesion
- High spreading rate and hiding power
- Excellent whiteness
- Superior levelling properties
- Good brushability
- Easy to sand after drying
- Ideal substrate for all types of enamel paint
- Suitable for brush, roller or spray-gun application
- Suitable for interior and exterior use
Suitable for
- Metal surfaces
- Wooden surfaces
- Wall preparation
- Covering stains and marks
- Insulating patches and imperfections
- Use as a basecoat before enamel paint
Technical Specifications
- Type: Alkyd-based primer
- Viscosity: 80 ± 5 KU at 25°C
- Density: 1.46 ± 0.02 kg/L
- Coverage with one coat: 16–18 m²/L
- Coverage with two coats: 8–9 m²/L
- Touch dry: 45–60 minutes
- Topcoat application: After 20–24 hours
- Dilution: Up to 5%
- Application methods: Brush, roller or spray gun
- Available colours: White and grey
- Available pack sizes: 375 ml, 750 ml, 2.5 L, 5 L and 10 L
- Maximum VOC content: 495 g/L
Surface Preparation
Surfaces must be smooth, clean and dry, and free from dust, grease, rust and loose material.
Clean the surface using a suitable cleaning solvent, such as Brush Solvent T300, and sand where required. Carefully remove all sanding dust before application.
Directions for Use
- Stir the product thoroughly before use.
- For brush or roller application, dilute by up to 5% with Brush Solvent T300.
- For spray-gun application, dilute by up to 5% with Spray Gun Solvent T350.
- Apply one or two coats using a brush, roller or spray gun.
- Allow the surface to dry for 20–24 hours.
- Sand the surface using suitable sandpaper to produce a smooth finish.
- Remove all loose dust and apply a suitable enamel paint for wood or metal.
Application Conditions
- Application temperature: 5°C to 35°C
- Relative humidity: Below 80%
- For exterior applications, do not apply when rain or frost is expected within the following 48 hours.
- Do not apply to wet, dusty or greasy surfaces.
Cleaning of Tools
- Clean brushes and rollers with Brush Solvent T300, followed by soapy water or detergent.
- Clean spray guns using Spray Gun Solvent T350.
Storage
Keep the container tightly closed and store it in a cool, dry area at temperatures between 5°C and 38°C.
Warning
- Carefully read the instructions and safety information on the container before use.
- Use suitable personal protective equipment.
- Do not dispose of liquid waste into the ground, drains or groundwater.
- Unused product must be disposed of in accordance with local regulations.
- The user should confirm the product’s suitability for the intended application before use.
TDS_Metal_Primer_EN-1
- Home delivery from Monday to Friday, with a maximum processing time of five (5) calendar working days.
- BoxNow service available for selected items with a maximum processing time of five (5) calendar working days. In case of increased order volume, there is a possibility of delay.
- Receiving from ACS Courier stores with a maximum processing time of seven (7) calendar working days. In case of increased order volume, there is a possibility of delay.
- Receiving from the Company's store in Limassol with a maximum waiting time of twenty-four (24) working hours. The Company will contact you when your order is ready for receipt. You can receive your order from the reception area of the Company's store. To receive your order, you must provide your order number, which you will find in the email that will be sent to you by the Company upon the completion of your order. Receipts from the Company's store are made from Monday to Friday from 08:00 - 20:00, Saturday from 08:00 - 19:00 and Sunday from 10:00 - 19:00.
Click here for more information on shipping costs.
For your convenience and service, the online store of the Company accepts Visa, Mastercard & Maestro credit cards.
