TO XRO.MA S-MICRO Silicon acrylic micronized water primer 1L

S-MICRO PRIMER is a bluish to milky white

acrylic-silicon copolymer, water-based primer. It

promotes adhesion and enhance workability of

application on all kind of water-based coatings for

interior and exterior use, paints, render-plaster or

elastomeric products. It can be used over new

surfaces/substrates like gypsum or cemented

boards, cemented facades, brick walls, roof tiles

and horizontal flat roof, also to asbestos and old

surfaces.

Due to its micronized nature, it is intended to

consolidate and protect porous surfaces from

moisture as substrate for emulsion paints as well

as to already coated surfaces as a base coat.

It’s almost odorless and friendly to environment

and user of the interior and exterior places while

contributing with low VOC.

Products Properties

Color: Bluish Milky White

pH: 8-9

Density: 1.01 ± 0.03 g/ml

Time to touch: 1 hour (+23ºC)

Time to recoat: 4 hours (+23ºC)

Substrate preparation -Product Application

Substrate should be clean and dry without any

loose material, oil, sand, dust or other substances

that could create poor adhesion.

Roller, brush, and airless spraying could be used

for application of product.

Before application make an easy agitation until

you have a homogenous product.

The recommended conditions during application

are between 10-35°C and air humidity should not

exceed 80%.

S-MICRO PRIMER is a ready to use product,

applied in one layer and could be dissolved until 50%

with water in case needed. You can apply any kind

of coat after primer is fully dried. Consumption is

about 10-15 m2

/lt dependent on the absorption of

surface. For substrates with high absorption no

dilution is recommended.

Tools should be cleaned thoroughly immediately

after application with potable water and detergent.

Packaging

The product is delivered in 1lt, 5 lt, 10 lt canisters.

Shelf-Life - Storing

The product has a shelf-life of 24 months after

production in tight sealed canisters and should be

stored between 5-35oC. Protect it from direct sun

light and Frost.

Volatile Organic Compounds (VOC)

According to the Directive 2004 /42/EU (Annex II,

table A) the maximum allowed content in VOC for

subcategory h, type WB is 30 g/lt (2010). The

ready to use product S-MICRO PRIMER has a

maximum VOC content <2 g/lt.