TESY Vertical electric water heater 50L 2kW - T50V

Ignition pin for sensor applications.

The TESY 10 L electric water heater is a compact storage unit designed for under-sink installation. With 1500 W heating power, it provides a practical source of hot water while its compact dimensions allow installation in areas with limited available space. The water heater requires 35 minutes to achieve a temperature increase of 45 K (15–60°C). It has an energy efficiency class B, an XXS load profile, and annual electricity consumption of 573 kWh.

The VANSTON 15 L electric water heater is a compact open-type storage water heater with a 1500 W heating element, designed for suspended installation. It operates at 220–240 V / 50–60 Hz, with a maximum adjustable water temperature of 75°C and a nominal water pressure of 0.8 MPa. The water inlet and outlet are positioned at the top, making it suitable for installations requiring upper pipe connections.

SIT rod for use with boiler cleaning brushes.

The VANSTON 12 L/min gas water heater provides instant hot water with a rated output of 12 L/min (ΔT = 25 K) and a rated heat input of 24 kW. It is suitable for natural gas (NG) and LPG and features Low NOx emissions of 47 mg/kWh. The unit features automatic pulse ignition, flame monitoring and temperature adjustment via a control knob. With a thermal efficiency of over 86%, a water operating pressure range of 0.2–10 bar and a C13 appliance configuration, it is designed for efficient and practical hot water production.

The Triton T90SR is the ultimate quiet tachythermic electric shower with a built-in pump, designed specifically for homes with low-pressure or gravity-fed water systems. Featuring Quiet Mark-approved technology, the T90SR operates so silently that you’ll barely notice the pump while enjoying a powerful, consistent shower. Perfect for stud walls sensitive to noise or vibration, the T90SR combines modern design, reliable performance, and Triton engineering excellence. It also directly replaces older T90 models, using the same footprint and fixing points — making upgrades quick and easy. Power Rating: 7.5 kW Temperature Control: Stabilised system Low Pressure Indicator: Yes Controls: Start/Stop Button Manual Temperature Control Plumbing System: Gravity-fed cold water supply Water Entry Points: Left-hand side – Top, Bottom, Back Cable Entry Points: Left-hand side – Top, Bottom, Back Outlet Connection: ½" BSP male thread Operating Pressure: Minimum: 8 cm head Maximum: 10 m head Shower Head: 5 spray patterns 110 mm diameter Rub-clean nozzles Rail Dimensions: Length: 530 mm Bracket distance: 480 mm Diameter: 22 mm Hose: 1.25 m anti-twist, double interlocked stainless steel Finish: White / Chrome Certifications: BEAB, CE, BS Kitemark, IP25, Quiet Mark Warranty: 2 Years (Parts & Labour)

The TESY 100 L electric water heater is designed for vertical installation, offering a large hot water storage capacity for everyday domestic use. With a 100 L capacity and 3 kW heating power, it provides an efficient solution for heating and storing domestic hot water. The unit has a heating time of 2 hours and 36 minutes for a temperature increase of 45 K (15–60°C). It features an L load profile, C energy efficiency class and annual electricity consumption of 2734 kWh.