SOLCORE F1D Electric instant water heater Inverter 5.5 kW - SOLCORE-F1D

The VANSTON 12 L/min gas water heater provides instant hot water with a rated output of 12 L/min (ΔT = 25 K) and a rated heat input of 24 kW. It is suitable for natural gas (NG) and LPG and features Low NOx emissions of 47 mg/kWh. The unit features automatic pulse ignition, flame monitoring and temperature adjustment via a control knob. With a thermal efficiency of over 86%, a water operating pressure range of 0.2–10 bar and a C13 appliance configuration, it is designed for efficient and practical hot water production.

The CLAGE CEX 6/9 is a compact, electronically controlled instant water heater, ideal for kitchens, bathrooms, or washbasins. Designed for precise temperature control and energy-efficient performance, it delivers instant hot water with consistent temperature and minimal energy waste. Thanks to TWIN TEMPERATURE Control TTC®, it provides degree-accurate temperature stability even under fluctuating water pressure. With Multiple Power System (MPS®), the power can be set during installation – 6.6 or 8.8 kW at 230 V – for optimal customization. Type: Electronic instant water heater Nominal power rating (MPS®): 6.6 / 8.8 kW Voltage: 230 V (1~ / N / PE 220–240 V AC) Max operating pressure: 1 MPa (10 bar) Water connections: G ½" Hot water output (Δt = 33 K): 2.9 – 3.8 L/min Switch-on flow rate: 2 L/min Max flow rate: 5 L/min Nominal current: 29 – 38 A Required cable diameter: 4 – 6 mm² Max inlet temperature: 60 °C Solar-ready: Yes Protection class: IP 25 Specific water resistance (15 °C): ≥ 1100 Ω·cm Weight (filled with water): 2.7 kg Warranty: 24 months The CLAGE CEX 6/9 E-Comfort combines German precision, modern design, and intelligent energy management, making it a reliable and efficient choice for single-point hot water applications.

SIT brass brush for boiler cleaning, with M12 connection and 20 mm size.

Ignition pin for sensor applications.

SIT brush for boiler cleaning, with M12 connection and dimensions of 800 x 35 mm.

The SOLCORE TACHYTHERM 9 kW Inverter electric instant water heater heats water in real time, without the need for a hot water storage tank. It operates on single-phase electricity and uses Inverter technology to adjust the required power according to the selected water temperature, helping maintain stable temperature while reducing unnecessary energy consumption. It features Dynamic Temperature Control (DTC), a built-in LED digital display with touch controls, and preset temperature adjustment from 25°C to 55°C. Maximum water flow reaches 4 L/min, while approximately 38–42°C is indicated as a standard temperature range for shower use. The unit supports both free-flow and line (pressure) installation and can also be incorporated into a hybrid installation with a solar water heater, solar collectors, central-heating boiler or gas-heated hot water system.

Housing box for gas water heater. It provides a dedicated enclosure around the water heater for a practical and tidy installation.

For the installation or removal of electric immersion heaters fitted on domestic hot water cylinders with moulded insulation. Manufactured from 3mm thick steel and zinc plated with offset handle.

Simple brackets made of electrogalvanized steel with an epoxy varnish finish. Easy and quick installation with adjustable mounting distance. Complete with fixing screws, plugs, and vibration dampers. Compact size for easy transport and storage.