VANSTON Electric water heater 15 L 1500 W - VAN-T15U

The VANSTON VAN-TG10L gas water heater provides an instant hot water output of 11 L/min (Δt = 25°C), with a rated input power of 22 kW. It is compatible with G20 natural gas at 20 mbar and G31 gas at 37 mbar. It features electronic ignition, natural flue gas draught and a 3 V power supply using 2 batteries. Safety features include flame-failure protection, overheating protection, dry-burn protection, flue gas backflow protection and protection against excessively high inlet water pressure.

Copper pipe with a diameter of 22 mm and a length of 5.8 m.

The CLAGE CEX 6/9 is a compact, electronically controlled instant water heater, ideal for kitchens, bathrooms, or washbasins. Designed for precise temperature control and energy-efficient performance, it delivers instant hot water with consistent temperature and minimal energy waste. Thanks to TWIN TEMPERATURE Control TTC®, it provides degree-accurate temperature stability even under fluctuating water pressure. With Multiple Power System (MPS®), the power can be set during installation – 6.6 or 8.8 kW at 230 V – for optimal customization. Type: Electronic instant water heater Nominal power rating (MPS®): 6.6 / 8.8 kW Voltage: 230 V (1~ / N / PE 220–240 V AC) Max operating pressure: 1 MPa (10 bar) Water connections: G ½" Hot water output (Δt = 33 K): 2.9 – 3.8 L/min Switch-on flow rate: 2 L/min Max flow rate: 5 L/min Nominal current: 29 – 38 A Required cable diameter: 4 – 6 mm² Max inlet temperature: 60 °C Solar-ready: Yes Protection class: IP 25 Specific water resistance (15 °C): ≥ 1100 Ω·cm Weight (filled with water): 2.7 kg Warranty: 24 months The CLAGE CEX 6/9 E-Comfort combines German precision, modern design, and intelligent energy management, making it a reliable and efficient choice for single-point hot water applications.

The CLAGE M3 (E-mini) is a cost-effective and energy-efficient solution for supplying warm water to single points of use, such as washbasins or small kitchen sinks. With its compact undersink design, it provides instant hot water exactly when needed, saving both space and energy. This hydraulically controlled instant water heater delivers full heating power automatically when water flows through the unit. It is a vented model, suitable only for open-outlet pressure-free taps, making it ideal for replacing traditional small storage heaters. Type: Hydraulically controlled instant water heater (undersink model) Power: 3.5 kW Voltage: 230 V Operation: Automatic full heating activation with water flow Design: Vented – only for open-outlet pressure taps Installation: Quick and easy, ideal replacement for storage heaters Energy efficiency: Excellent – provides hot water only when required Dimensions (H × W × D): 13.5 × 18.6 × 8.7 cm Warranty: 24 months The CLAGE M3 E-mini delivers efficient, on-demand hot water for single washbasins, combining German engineering, compact design, and long-term reliability in one smart unit.

SIT brass brush for boiler cleaning, with M12 connection and 60 mm size.

The SOLCORE TACHYTHERM K24 is a 3-phase Inverter electric instant water heater that heats water in real time, only when required. Its 3-in-1 Smart Power system allows the maximum operating power to be set at 18, 21 or 24 kW, while Dynamic Temperature Control (DTC) provides temperature adjustment from 30°C to 60°C. It features a 6th-generation cast aluminium heating element, LED display with touch controls, automatic activation according to water flow and continuous self-diagnosis. The unit supports both free-flow and line installation and can also operate in series with a solar water heater, solar collectors, central-heating boiler or hot water supplied by a natural-gas boiler.

The VANSTON 16 L/min gas water heater provides instant hot water with a rated output of 16 L/min (ΔT = 25 K) and a rated heat input of 31 kW. It is suitable for natural gas (NG) and LPG and features Low NOx emissions of 50 mg/kWh. The unit features automatic pulse ignition, flame monitoring and a temperature control knob. With a thermal efficiency of over 86%, IPX4 protection and compatibility with C13 installation configuration, it combines efficient hot water production with practical operation.

The TESY BiLight Slim T30V electric water heater features a slim vertical design with a 30 L capacity and 1200 W rated power, making it suitable for installations where available space is limited. With a diameter of 353 mm, it combines compact dimensions with a 44 L V40 hot water capacity. The unit has an S load profile, C energy efficiency class, and a specified heating time of 1 hour 18 minutes for a temperature increase of 45 K (15–60°C).