Ball valve 1/4" male thread x 1/4" push fit

The PHILIPS AUT811 is a Carbon Block replacement cartridge designed for compatible PHILIPS on-tap water filtration systems, including the AUT1211. Its 3-stage microfiltration provides filtration down to 0.01 micron, helping reduce particulate matter, chlorine, lead and pesticides while improving the taste and odour of tap water. PHILIPS specifies up to 99% chlorine reduction for this cartridge. The cartridge features the PHILIPS QuickTwist design for quick, hygienic replacement without additional tools. It is designed for municipal tap water at an inlet temperature of 5–38°C and pressure of 0.1–0.4 MPa (1–4 bar). Depending on the specific AUT811 market version and operating conditions, PHILIPS documentation specifies a service life of up to 24 months.

The Plastic Pressure Reducer 1/4" Push Fit is a practical plumbing component designed to reduce and regulate water pressure in compatible water supply systems. Its compact construction makes it suitable for installations where controlled water pressure is required. Featuring a 1/4-inch push-fit connection, the reducer allows convenient connection to compatible tubing without requiring traditional threaded fittings. The push-fit design helps simplify installation and maintenance while providing a practical connection solution. Made from plastic, this pressure reducer is suitable for use in compatible water filtration systems and other low-diameter water supply applications. Its compact design allows it to be incorporated into existing installations where pressure reduction is needed. Features Plastic pressure reducer for compatible water supply systems Designed to help reduce incoming water pressure 1/4-inch push-fit connection Push-fit design for convenient tubing connection Suitable for compatible 1/4-inch tubing systems Compact construction for space-efficient installation Helps provide controlled water pressure to connected equipment Suitable for compatible water filtration installations Practical component for plumbing maintenance and replacement Designed for use in systems requiring pressure reduction

The Philips AUT728 is a genuine 4-in-1 replacement filter specifically designed for the Philips AUT7006 reverse osmosis system. Its advanced filtration composition reduces larger particles while absorbing chlorine, pesticides and various chemicals that may be present in the water. During the final filtration stage, the water passes through the filter’s post-carbon layer again, helping improve its taste. The filter works together with the AUT7006 system’s reverse osmosis membrane, helping maintain consistent performance and effective multi-stage water treatment. It provides a filtration capacity of up to 15,330 litres and an estimated service life of 12 to 24 months. Actual filter life depends on daily water consumption and local tap water quality. Features Genuine Philips replacement filter Designed for the AUT7006 reverse osmosis system Innovative 4-in-1 filtration technology Reduces larger particles and sediment Absorbs chlorine, pesticides and chemicals Helps reduce unpleasant odours and tastes Post-carbon layer helps improve water taste Supports consistent system performance Easy to replace Suitable for household use

The AQUAPHOR RO-101S Morion is a compact 4-stage under-sink reverse osmosis system designed for deep purification of drinking water. Its filtration configuration combines the K5 sediment pre-filter, K2 carbon filtration module, RO-50S reverse osmosis membrane and K7M final mineralizing cartridge. The RO membrane helps remove water hardness and a broad range of dissolved contaminants, including heavy metals, nitrates, pesticides, bacteria and viruses. Unlike conventional RO systems with a separate pressure tank, the Morion incorporates a compact 5 L clean-water storage system within the unit, significantly reducing the space required under the sink. The final K7M mineralizing stage enriches the purified water with calcium and magnesium, improving its mineral balance and taste. The system can operate from approximately 2 bar inlet pressure without an electric pump, making it suitable for a wide range of domestic installations.

The PHILIPS X-Guard Power AWP183 is a replacement scale inhibitor media pack designed for the compatible PHILIPS X-Guard Power AWP9820 system. Rather than functioning as a conventional sediment or drinking-water filter cartridge, the AWP183 is specifically designed to help inhibit limescale formation in water-using appliances. The scale-inhibiting media helps prevent hardness minerals from forming deposits on internal components, contributing to the protection of appliances such as water heaters, washing machines and dishwashers. Regular replacement helps maintain the anti-scale performance of the X-Guard Power system. The package contains 2 replacement scale inhibitor elements. The AWP183 does not soften the water by removing calcium and magnesium; its function is to inhibit their tendency to form scale deposits.

The PHILIPS AWP3704 X-Guard is a compact on-tap water filtration system designed to provide filtered drinking water directly from the kitchen faucet. Its X-Guard filter uses high-quality natural activated carbon and reduces up to 99% of chlorine and taste-impairing substances, helping improve the taste and quality of mains tap water. Installation is simple using the appropriate faucet adapter, while the quick-twist design makes cartridge replacement easy. The system provides three selectable water modes: filtered stream for drinking and cooking, unfiltered stream, and unfiltered shower mode for washing and cleaning. It offers a water flow rate of 2 L/min and a filtration capacity of up to 1,000 L, while an integrated timer reminds the user when the cartridge should be replaced. The system is compatible with both PHILIPS X-Guard AWP305 and X-Guard Ultra AWP315 replacement cartridges.

Precision engineered high quality ceramic filter, this ceramic water filter delivers excellent performance in removing impurities from your water supply. Microscopic filtration of just 0.3μm effectively captures even the smallest particles, sediment and bacteria, ensuring your water is crystal clear and safe to drink. Easy Installation: Designed to fit standard 10″ x 2.5″ filter housings, this ceramic filter is a breeze to install, making it a convenient addition to your existing water filtration system. Healthier Living: By removing contaminants and impurities, this filter improves the taste and quality of your drinking water, promoting a healthier lifestyle for you and your family. Additional information Weight 0,3 kg Filter type           Ceramic filter Filter Diameter  2.5" (inches) Micron  0.3μm Filtration Stages               One (1) Compatible devices         Countertop, Under Sink Filter Height       10" (inches)