Einhell Submersible Dirty Water Pump 1300W, 23.000 L/h - EIN-4170742

The AQUASTRONG EPS-01-2.2 is an automatic electronic pressure controller designed to automate the start and stop operation of compatible water pumps according to water demand. It is suitable for domestic water supply, pressure boosting, irrigation and other clean-water pumping systems. This 2.2 bar version is preset to start the connected pump when system pressure drops to approximately 2.2 bar. AQUASTRONG documentation confirms that the EPS-01 series is available with different preset starting pressures, including 2.2 bar. According to the supplied specifications, the EPS-01-2.2 operates at 110–240V, 50/60Hz, supports a maximum current of 10A and a maximum connected power of 1.5kW. It is rated for a maximum operating pressure of 10 bar and a maximum operating temperature of 60°C. The controller features IP65 protection and an integrated pressure gauge for convenient monitoring of system pressure. The standard connection thread is G1", while G1¼", G1½" and NPT1" connections are listed as optional configurations. Its automatic operation provides a compact and convenient solution for converting a compatible conventional water pump into an automatically controlled pressure-boosting system.

The IMAS IM25-4S-180B is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic central heating and air-conditioning systems operating in closed or open pressurized circuits. The pump features three selectable operating speeds, with power consumption of 38W, 53W and 72W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.0 m³/h and a maximum head of 4 m. The hydraulic pump body is manufactured from brass and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective sleeve, stator sleeve and sealing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-4S-180B can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The AQUASTRONG ERP25-80/180 is a multi-speed circulation pump designed for efficient water circulation in HVAC, domestic hot water, and solar heating systems. Its three-speed operation allows performance to be adjusted according to system requirements, improving efficiency while reducing energy consumption. With a maximum head of 7.1 metres and a maximum flow rate of 120 L/min, it is ideal for larger residential and light commercial heating systems, domestic hot water circulation, and solar heating applications. Its durable construction ensures reliable, quiet, and long-lasting performance. The ERP25-80/180 is suitable for: HVAC systems Domestic hot water circulation Solar heating systems Residential and light commercial heating applications

The Einhell GC-DP 9035 N is a robust and powerful submersible dirty water pump designed for efficient drainage and removal of contaminated water. With a 900W motor and a maximum flow rate of 18,000 L/h (18 m³/h), it is suitable for draining flooded areas, tanks, pits, reservoirs and other applications involving dirty water. The pump provides a maximum delivery head of 9 m and a maximum delivery pressure of 0.9 bar. It can handle solid particles up to 35 mm, making it suitable for water containing larger suspended particles and debris. The GC-DP 9035 N can operate at a maximum immersion depth of 5 m and is suitable for water temperatures up to 35°C. Pump operation can start from a minimum water level of 90 mm, while shallow suction is possible down to 90 mm. Its infinitely adjustable float switch enables automatic pump operation according to the water level. The pump is also equipped with a universal connection and a 90° angle connection, providing greater flexibility during installation. A 10 m power cable allows convenient installation in tanks, pits and other submerged applications, while the 47.8 mm (G1½") pressure connection is suitable for efficient dirty-water discharge.

Water storage tanks provide a safe, reliable, and efficient solution for storing clean water in residential, commercial, and industrial applications. Designed for durability and hygienic water storage, they help ensure a continuous water supply and are suitable for a wide range of applications, from domestic use and irrigation to backup water supply systems.

The Einhell GC-PP 900 N is a powerful 900W submersible pressure pump designed for pumping clean water from wells, cisterns and rainwater reservoirs. With a maximum flow rate of 6,000 L/h (6 m³/h), it is ideal for garden irrigation and other applications requiring efficient water delivery at high pressure. Its multi-stage impeller system enables the pump to generate a maximum delivery head of 32 m, providing the pressure required for demanding irrigation and water supply applications. The GC-PP 900 N can operate at a maximum immersion depth of 7 m and is suitable for pumping water at temperatures up to 35°C. The pump operates on a 230V / 50Hz power supply and features a 33.3 mm (G1") hose connection. It comes with a 10 m H07RN-F power cable, providing flexibility when installing the pump in wells, tanks and other submerged applications.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The AQUASTRONG ERP25-60/180 is a multi-speed circulation pump designed for efficient water circulation in HVAC, domestic hot water, and solar heating systems. Its three-speed operation allows users to optimize performance according to system requirements, improving efficiency while reducing energy consumption. With a maximum head of 6.1 metres and a maximum flow rate of 68 L/min, it is ideal for residential and light commercial heating systems. Its robust construction ensures reliable, quiet, and long-lasting performance. The ERP25-60/180 is suitable for: HVAC systems Domestic hot water circulation Solar heating systems Residential and light commercial heating applications

The IMAS IM25-8S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.