AQUASTRONG EKS-900SE 900W / 1.2HP Stainless Steel Submersible Water Pump with Float Switch - AQS-EKS-900SE

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The AQUASTRONG ERP25-80/180 is a multi-speed circulation pump designed for efficient water circulation in HVAC, domestic hot water, and solar heating systems. Its three-speed operation allows performance to be adjusted according to system requirements, improving efficiency while reducing energy consumption. With a maximum head of 7.1 metres and a maximum flow rate of 120 L/min, it is ideal for larger residential and light commercial heating systems, domestic hot water circulation, and solar heating applications. Its durable construction ensures reliable, quiet, and long-lasting performance. The ERP25-80/180 is suitable for: HVAC systems Domestic hot water circulation Solar heating systems Residential and light commercial heating applications

The IMAS IM25-6-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating under pressure in closed or open circuits. The pump features three selectable operating speeds, with power consumption of 46W, 67W and 93W, allowing its performance to be adjusted according to the requirements of the installation. It provides a maximum flow rate of 4.1 m³/h and a maximum head of 6 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and sealing flange are manufactured from stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-6-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

Expansion vessels are essential components in heating and hydraulic systems, designed to absorb the expansion of water caused by temperature changes and help maintain stable system pressure. By compensating for variations in water volume, they help prevent excessive pressure build-up, reduce stress on system components, and contribute to reliable and efficient operation.

The NAKAYAMA PRO SP1315 is a powerful 1300W submersible sewage pump designed for pumping dirty water and wastewater in demanding drainage and sewage applications. The pump is equipped with an unshrouded cutting impeller, allowing it to handle wastewater containing solids and helping reduce the risk of clogging during operation. Its robust design makes it suitable for sewage pits, drainage systems and other applications involving heavily contaminated water. With a maximum flow rate of 18,000 L/h (18 m³/h) and a maximum delivery head of 12 m, the SP1315 provides high pumping capacity for demanding installations. It can operate at a maximum immersion depth of 7 m and with water temperatures up to 40°C. The pump operates on a 220V/50Hz power supply and features a large 2" discharge outlet for efficient wastewater discharge. It comes with an 8 m power cable, while its compact dimensions of 42 × 37 × 20 cm facilitate installation in wastewater pits and drainage systems.

The Einhell GC-PW 16 is a powerful petrol water pump designed for quickly transferring large quantities of water in locations where an electrical power supply is unavailable. It is suitable for garden irrigation, water transfer, drainage and other demanding outdoor pumping applications. Its 1600W petrol engine delivers a maximum flow rate of 14,000 L/h (14 m³/h) and a maximum delivery head of 28 m, with a maximum delivery pressure of 2.8 bar. The pump provides a maximum suction height of 7 m and operates at speeds of up to 3,600 min⁻¹. Both the suction and pressure connections are 47.8 mm (G1½" AG), allowing high-volume water transfer. The 1.8 L fuel tank provides practical operating capacity for extended pumping tasks. The GC-PW 16 is designed for mobile use and features a practical carrying handle for easier transportation. With its independent petrol-powered operation, it is a practical solution for pumping water in gardens, agricultural areas and locations without access to mains electricity.

The Einhell GC-DP 7835 is a powerful and reliable submersible dirty-water pump designed for demanding drainage and water-removal applications. With its 780W motor and maximum flow rate of 15,700 L/h (15.7 m³/h), it provides efficient pumping of dirty water from flooded areas, tanks, pits, construction sites and other drainage applications. The pump delivers a maximum head of 8 m and a maximum delivery pressure of 0.8 bar. One of its key advantages is its ability to handle solid particles up to 35 mm, making it particularly suitable for heavily contaminated water containing larger suspended particles and debris. The GC-DP 7835 can operate at a maximum immersion depth of 7 m and is suitable for water temperatures up to 35°C. Pump operation can begin from a minimum water level of approximately 50 mm. Its pump housing is manufactured from impact-resistant plastic, providing a durable yet practical construction. An integrated carrying handle facilitates transportation, while the built-in cable winder allows neat and convenient storage of the power cable. The pump comes with a 10 m power cable and features a 47.8 mm (G1½") pressure connection, providing a practical solution for a wide range of dirty-water drainage applications.

The IMAS IM32-10S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in closed or open pressurized circuits. The pump features three selectable operating speeds, with power consumption of 150W, 210W and 270W, allowing its performance to be adjusted according to the requirements of the heating or circulation system. It provides a maximum head of 10 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are manufactured from stainless steel. Additional construction features include a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM32-10S-180 can operate with liquid temperatures up to 110°C and at a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1¼" threaded connections and must be installed with the motor shaft in a horizontal position.