AQUASTRONG ESSWm100A 0.75kW / 1HP Submersible Sewage Pump with Float Switch - AQS-ESSWM100A

The AQUASTRONG EPS-01 is an automatic electronic pressure controller designed to automate the operation of compatible water pumps. It controls pump start and stop according to water demand, providing convenient automatic operation for domestic water supply, pressure boosting, irrigation and other clean-water pumping systems. AQUASTRONG documentation identifies the EPS-01 as an automatic pressure-switch controller with a 1.5 bar starting pressure, 10 bar maximum pressure and IP65 protection. The controller operates at 110–240V, 50/60Hz, supports a maximum current of 10A and, according to the supplied specification, a maximum connected power of 1.5kW. Maximum operating pressure is 10 bar, while maximum operating temperature is 60°C. The EPS-01 features IP65 protection and a pressure gauge for convenient monitoring of the system. Its standard connection is G1", with optional G1¼", G1½" and NPT1" connection configurations according to the supplied specifications. With a preset starting pressure of 1.5 bar, the EPS-01 provides a practical solution for converting a compatible conventional water pump into an automatically controlled pumping system.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

High-quality horizontal water tanks with feet designed for safe, reliable, and efficient water storage in residential, commercial, and industrial applications. Their horizontal design and integrated support feet provide enhanced stability and secure floor installation, while the durable construction makes them suitable for domestic water storage, irrigation, and backup water supply systems.

The AQUASTRONG SMART2-42 is a compact commercial booster pump designed to provide reliable water pressure for medium-sized commercial buildings and multi-dwelling installations. Its powerful 550W motor delivers stable performance, high efficiency, and dependable operation for demanding water boosting applications. With a maximum head of 42 m and a maximum flow rate of 4.5 m³/h, it is an ideal solution where higher water pressure is required. The integrated Intelligent Protection system safeguards the motor during operation, improving reliability and extending service life. Suitable for clean water applications, the SMART2-42 handles liquid temperatures up to 95°C while maintaining a low operating noise level of only 50 dB, making it an excellent choice for commercial environments where quiet operation is important.

The Einhell GE-DW 1155 N-A is a powerful 1100W deep well pump designed for pumping clean water from deep wells, boreholes, cisterns and reservoirs. With a maximum flow rate of 6,000 L/h, it is suitable for domestic water supply, garden irrigation and other applications requiring water delivery from greater depths. The pump features an 8-stage impeller system, designed to generate high delivery pressure and ensure efficient water supply. Its durable stainless steel pump housing provides excellent resistance to corrosion and is complemented by a robust pressure connection with stainless steel insert. The automatic function allows convenient operation according to water demand, while the integrated dry-running protection helps protect the pump when insufficient water is available. An integrated non-return valve prevents unwanted backflow, while the high-quality mechanical seal contributes to reliable operation and long service life. The pump also features a stainless steel strainer to help prevent larger particles from entering the hydraulic system. For convenient installation, the GE-DW 1155 N-A features an easily accessible hose connection on the top of the pump and two hanging loops. It comes with a long 22 m power cable, making it suitable for installation in deep wells and boreholes.

The IMAS IM25-4S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids free from chemicals. It is suitable for domestic central heating and air-conditioning systems, operating in both closed and open pressurized circuits. The pump provides three selectable operating speeds, with power consumption of 38W, 53W and 72W, allowing its performance to be adapted to the requirements of the installation. Its hydraulic section is manufactured from cast iron and incorporates a wet rotor motor. The motor housing is made of die-cast aluminium, while the technopolymer impeller provides reliable and durable operation. The motor shaft is manufactured from hardened stainless steel, supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protection sleeve, stator sleeve and sealing flange are also manufactured from stainless steel. Additional construction features include a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. The motor has IP44 protection and Class F insulation. The IM25-4S-180 operates from a single-phase 230V/50Hz supply, has an installation length of 180 mm and features 1½" threaded connections. Installation must be carried out with the motor shaft in a horizontal position.

The IMAS IM25-8S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The AQUASTRONG SMART MINI is a compact domestic booster pump designed to increase water pressure in small residential applications where installation space is limited. Its compact size, quiet operation, and reliable performance make it an excellent solution for apartments, houses, and residential water boosting systems. Powered by a permanent magnet motor, it delivers efficient performance while reducing energy consumption. The integrated Intelligent Protection system enhances operational safety by protecting the pump during demanding working conditions, ensuring long-term reliability. Designed for clean water applications, the SMART MINI can handle liquid temperatures up to 95°C while operating at a low noise level of only 50 dB. Its convenient water fill plug also simplifies installation and maintenance.

The Einhell GE-PW 46 is a powerful petrol water pump designed for quickly transferring large quantities of water in locations where no connection to the electrical power grid is available. Its 4.6kW four-stroke petrol engine provides the power required for demanding irrigation, water transfer and drainage applications. With a maximum flow rate of 23,000 L/h (23 m³/h), the pump can deliver water to a maximum head of 26 m and generate a maximum delivery pressure of 2.6 bar. The maximum suction height is 6.5 m, providing flexibility when drawing water from tanks, reservoirs and other water sources. Both the suction and pressure connections feature robust 59.6 mm (2") threaded connections. The pump is mounted within a sturdy tubular steel frame, providing stability during operation while also protecting the unit and facilitating transportation. The integrated fuel tank supports extended operating periods, while separate water filling and drain screws simplify priming before operation and draining residual water after use. The GE-PW 46 is supplied with a practical range of connection accessories, including two 50.8 mm (2") hose adapters, two 33.3 mm (1") reducers, two 47.8 mm (1½") adapters and one 50.8 mm (2") intake cage, providing flexibility for different installation requirements.

The AQUASTRONG SMART8-55 is a high-performance commercial booster pump designed for commercial buildings, apartment complexes, and large water supply systems. Equipped with a variable-speed permanent magnet motor, it automatically adjusts its performance according to system demand, delivering constant water pressure, outstanding energy efficiency, and reduced power consumption. Featuring a 1500W motor, a maximum head of 55 m, and a maximum flow rate of 16 m³/h, it is an excellent choice for demanding applications requiring high pressure and flow capacity. Its cast iron housing ensures outstanding durability, while the integrated Intelligent Protection system enhances operational safety and extends the pump's service life. Designed for clean water applications, the SMART8-55 handles liquid temperatures up to 95°C and operates at a low noise level of 50 dB, making it a reliable solution for continuous commercial use.