AQUASTRONG EPCP-250P 250W Submersible Clean-Water Pump with Pre-Filter - AQS-EPCP-250P

The AQUASTRONG ECMIM4-30 is a stainless steel multistage centrifugal surface pump designed for reliable water supply, pressure boosting and water circulation in domestic, agricultural and light-commercial applications. It is suitable for household water supply, equipment support, pipeline pressurization, garden and greenhouse watering, fish farming and poultry operations. It can also be used in water supply and drainage systems, high-rise buildings, central air-conditioning and centralized heating circulation systems. Powered by a 0.55kW (0.75HP) motor, the ECMIM4-30 delivers a maximum flow rate of 7 m³/h (117 L/min) and a maximum head of 30 m. Its multistage centrifugal design combines increased water delivery capacity with reliable pressure performance, making it suitable for applications where higher flow rates are required. The pump features an AISI 304 stainless steel shaft, while the motor incorporates copper windings, built-in thermal protection, Class F insulation and IP55 protection. It is suitable for liquid temperatures up to 60°C, ambient temperatures up to 50°C, operation at altitudes up to 1,000 m, and a maximum working pressure of 8 bar. Comes with a 1.6 m power cable with UK plug.

The Einhell GC-SP 3580 LL is a powerful and versatile 350W submersible clear-water pump, designed for draining swimming pools, rainwater tanks, flooded basements, cisterns and other clean-water applications. It delivers a maximum flow rate of 8,000 L/h and a maximum delivery head of 7.5 m. One of its key features is its extremely low-level flat suction capability. The pump can start operating from a water level of just 8 mm and can continue draining down to approximately 1 mm of residual water, providing an almost wipe-dry result on a flat surface. The infinitely adjustable float switch allows automatic start and stop according to the water level. An integrated non-return valve helps prevent water from flowing back when the pump switches off, while the high-quality mechanical seal contributes to long and reliable service life. For flexible installation, the GC-SP 3580 LL supports 25/38 mm hoses and a 33.3 mm (1") male thread, as well as a 47.8 mm (1½") connection via the supplied 90° adapter. A Quick-Connector is also included for fast hose changes. The pump comes with a 10 m power cable, integrated cable winder and carrying handle for convenient transport and storage.

Expansion vessels are essential components in heating and hydraulic systems, designed to absorb the expansion of water caused by temperature changes and help maintain stable system pressure. By compensating for variations in water volume, they help prevent excessive pressure build-up, reduce stress on system components, and contribute to reliable and efficient operation.

Water storage tanks provide a safe, reliable, and efficient solution for storing clean water in residential, commercial, and industrial applications. Designed for durability and hygienic water storage, they help ensure a continuous water supply and are suitable for a wide range of applications, from domestic use and irrigation to backup water supply systems.

The AQUASTRONG ECMIM4-40 is a stainless steel multistage centrifugal surface pump designed for reliable water supply, pressure boosting and water circulation in domestic, agricultural and light-commercial applications. It is suitable for household water supply, equipment support, pipeline pressurization, garden and greenhouse watering, fish farming and poultry operations. The ECMI series is also suitable for water supply and drainage systems, high-rise buildings, central air-conditioning and centralized heating circulation systems. Powered by a 0.75kW (1HP) motor, the ECMIM4-40 delivers a maximum flow rate of 7 m³/h (117 L/min) and a maximum head of 40 m. Its multistage centrifugal design combines high water delivery capacity with strong pressure performance, making it suitable for installations requiring both increased flow and pressure. The pump features an AISI 304 stainless steel shaft, while the motor incorporates copper windings, built-in thermal protection, Class F insulation and IP55 protection. It is suitable for liquid temperatures up to 60°C, operation at altitudes up to 1,000 m, and a maximum working pressure of 8 bar. Comes with a 1.6 m power cable with UK plug.

The AQUASTRONG ECMIm2-40 is an Intelligent stainless steel multistage centrifugal surface pump designed for pressure boosting, household water supply, automatic irrigation and other clean-water applications. Its integrated PCL microcomputer chip provides intelligent pump control according to water demand. The system features automatic start and stop, delay-start protection and no-water protection, providing convenient automatic operation while helping protect the pump against unsuitable operating conditions. Powered by a 0.37kW (0.5HP) single-phase motor, the ECMIm2-40 delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 36 m. Its multistage hydraulic design provides consistent pressure performance across a wide range of flow requirements. The motor features copper windings, built-in thermal protection, Class F insulation and IPX4 protection. The pump is suitable for transferring clean water or other liquids with similar physical and chemical properties, with a liquid temperature range of 4–60°C, maximum ambient temperature of 50°C, and maximum working pressure of 10 bar. Comes with a 1.6 m power cable with UK plug.

High-quality horizontal water tanks with feet designed for safe, reliable, and efficient water storage in residential, commercial, and industrial applications. Their horizontal design and integrated support feet provide enhanced stability and secure floor installation, while the durable construction makes them suitable for domestic water storage, irrigation, and backup water supply systems.

The IMAS IM25-6-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating under pressure in closed or open circuits. The pump features three selectable operating speeds, with power consumption of 46W, 67W and 93W, allowing its performance to be adjusted according to the requirements of the installation. It provides a maximum flow rate of 4.1 m³/h and a maximum head of 6 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and sealing flange are manufactured from stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-6-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The Einhell GC-DW 1000 N is a powerful 1000W submersible deep well pump designed for pumping clean water from wells, boreholes, cisterns and other deep water sources. It is suitable for applications such as garden irrigation and water supply where reliable pressure generation is required. The pump features a multi-stage impeller system for efficient pressure generation and reliable water delivery. Its durable pump housing is manufactured from rust-resistant high-grade stainless steel, providing excellent corrosion resistance and long service life. An integrated non-return valve helps prevent water from flowing back when the pump stops, while the high-quality mechanical seal provides additional durability during continuous submerged operation. A stainless steel dirt screen helps protect the hydraulic system from larger particles. For additional motor protection, the GC-DW 1000 N features thermal overload protection. The robust pressure connector incorporates a stainless steel insert, while the easily accessible hose connection on the top of the pump simplifies installation. The pump is equipped with two suspension eyelets and comes with a 22 m lowering rope, allowing secure positioning and retrieval from deep wells and boreholes.

The AQUASTRONG EKP750 is a high-performance self-priming filtration pump designed for water circulation and filtration in swimming pools, spas, hot springs, and small to medium-sized pools. Its high flow capacity ensures efficient filtration and reliable water circulation for consistently clean pool water. The pump features an integrated pre-filter that captures leaves, hair, and larger debris before they reach the impeller, protecting the pump and reducing maintenance requirements. Constructed with durable plastic wet-end components and an aluminium motor, the EKP750 includes thermal motor protection, IPX5 protection, Class F insulation, and is rated for continuous duty (S1). Standard 1½-inch UPVC connectors ensure quick and easy installation in most pool filtration systems.