AQUASTRONG SMART2-42Z 550W Compact Booster Pump with 4m Self-Priming - AQS-SMART2-42Z

High-quality horizontal water tanks with feet designed for safe, reliable, and efficient water storage in residential, commercial, and industrial applications. Their horizontal design and integrated support feet provide enhanced stability and secure floor installation, while the durable construction makes them suitable for domestic water storage, irrigation, and backup water supply systems.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Water storage tanks provide a safe, reliable, and efficient solution for storing clean water in residential, commercial, and industrial applications. Designed for durability and hygienic water storage, they help ensure a continuous water supply and are suitable for a wide range of applications, from domestic use and irrigation to backup water supply systems.

The IMAS IM25-8S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

Compact water pump for light applications This compact electric water pump is suitable for pumping water from a well, for example. A handy tool for pumping water out of indoor premises. Easy to set up, with a capacity of 140 l/min.

The AQUASTRONG EF-01 is a water level float switch designed for the automatic control of pumps according to liquid level. It provides a simple and reliable solution for controlling the start and stop of compatible water pumps in tanks, reservoirs, drainage systems and other water-level control applications. This version is supplied without a balance block and comes with a 5 m cable, providing flexibility during installation and allowing the switching position to be selected according to the requirements of the system. The EF-01 is rated at 16(8)A / 250V and 16(14)A / 125V. The switch is designed for a service life of approximately 5,000 operating cycles. AQUASTRONG's catalogue confirms these electrical ratings and operating limits for the EF-01 series. It is suitable for liquids with temperatures up to 35°C and installations with a maximum ambient temperature of 40°C.

The DRENO COMPATTA 4MG is a single-phase automatic submersible sewage pump equipped with a Vortex impeller, designed for pumping wastewater, sewage and dirty water. The Vortex impeller design provides effective handling of wastewater containing suspended solids while helping reduce the risk of clogging. The pump features a 2" discharge outlet and operates from a 230V single-phase power supply. The automatic configuration allows the pump to start and stop according to the liquid level, making it suitable for wastewater pits, sumps, drainage systems and other applications requiring automatic operation. The COMPATTA 4MG can be installed as a free-standing pump, providing a simple and practical installation solution. For permanent installations, it can optionally be mounted on a guide rail system, allowing easier removal of the pump for inspection and maintenance.

The Einhell GC-DP 3325 is a compact and efficient 330W submersible dirty water pump designed for pumping wastewater and dirty water from flooded basements, excavation pits, tanks and other drainage applications. With a maximum flow rate of 9,500 L/h (9.5 m³/h), the pump achieves a maximum delivery head of 6 m and a maximum delivery pressure of 0.6 bar. It can handle foreign particles up to 25 mm in diameter, making it suitable for water containing larger solid particles. The smoothly adjustable float switch enables automatic start and stop according to the water level. The pump housing is manufactured from impact-resistant plastic, while the high-quality mechanical seal contributes to reliable operation and long service life. A foldable carrying handle makes the pump easy to transport and position. The universal connector supports 25 mm and 32 mm hoses as well as a 33.3 mm (G1") external thread, providing flexibility for different drainage installations. The GC-DP 3325 can operate at a maximum immersion depth of 7 m and with water temperatures up to 35°C. It comes with a 10 m power cable for convenient use in a wide range of applications.

The AQUASTRONG EPS-01 is an automatic electronic pressure controller designed to automate the operation of compatible water pumps. It controls pump start and stop according to water demand, providing convenient automatic operation for domestic water supply, pressure boosting, irrigation and other clean-water pumping systems. AQUASTRONG documentation identifies the EPS-01 as an automatic pressure-switch controller with a 1.5 bar starting pressure, 10 bar maximum pressure and IP65 protection. The controller operates at 110–240V, 50/60Hz, supports a maximum current of 10A and, according to the supplied specification, a maximum connected power of 1.5kW. Maximum operating pressure is 10 bar, while maximum operating temperature is 60°C. The EPS-01 features IP65 protection and a pressure gauge for convenient monitoring of the system. Its standard connection is G1", with optional G1¼", G1½" and NPT1" connection configurations according to the supplied specifications. With a preset starting pressure of 1.5 bar, the EPS-01 provides a practical solution for converting a compatible conventional water pump into an automatically controlled pumping system.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.