AQUASTRONG EF-01B Water level float switch with balance block & 10m cable - AQS-EF-01B-10M

The IMAS IM32-10S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in closed or open pressurized circuits. The pump features three selectable operating speeds, with power consumption of 150W, 210W and 270W, allowing its performance to be adjusted according to the requirements of the heating or circulation system. It provides a maximum head of 10 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are manufactured from stainless steel. Additional construction features include a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM32-10S-180 can operate with liquid temperatures up to 110°C and at a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1¼" threaded connections and must be installed with the motor shaft in a horizontal position.

Compact water pump for light applications This compact electric water pump is suitable for pumping water from a well, for example. A handy tool for pumping water out of indoor premises. Easy to set up, with a capacity of 140 l/min.

Expansion vessels are essential components in heating and hydraulic systems, designed to absorb the expansion of water caused by temperature changes and help maintain stable system pressure. By compensating for variations in water volume, they help prevent excessive pressure build-up, reduce stress on system components, and contribute to reliable and efficient operation.

The Einhell GC-SP 2275 is a compact and efficient 220W submersible clear water pump designed for pumping clean or slightly contaminated water from tanks, rainwater reservoirs, flooded basements and other water collection areas. With a maximum flow rate of 7,500 L/h (7.5 m³/h), the pump achieves a maximum delivery head of 6 m and a maximum delivery pressure of 0.6 bar. It can handle small particles up to 5 mm in diameter. The infinitely adjustable float switch enables automatic operation according to the water level, while the pump can start from a minimum water level of 25 mm. Its shallow suction capability allows the remaining water level to be reduced to approximately 5 mm. The pump housing is manufactured from impact-resistant plastic and features a high-quality mechanical seal for reliable operation and long service life. A practical folding carrying handle makes transportation and storage easier. The GC-SP 2275 features a 47.8 mm (G1½" IG) pressure connection and includes connections for 25 mm and 32 mm hoses, as well as threaded connection options. It comes with a 10 m power cable for flexible installation.

The AQUASTRONG EKP1600 is a high-performance self-priming filtration pump designed for water circulation and filtration in swimming pools, spas, hot springs, and medium to large swimming pools. With 1600W of power, a maximum flow rate of 465 L/min, and a maximum head of 18 metres, it delivers outstanding performance for demanding pool filtration systems. The integrated pre-filter captures leaves, hair, and larger debris before they reach the impeller, protecting the pump and reducing maintenance requirements. Constructed with durable plastic wet-end components and an aluminium motor, the EKP1600 features thermal motor protection, IPX5 protection, Class F insulation, and is rated for continuous duty (S1). Dual Ø48.5 mm and Ø60.3 mm connectors provide flexible installation with standard pool piping systems.

The DRENO COMPATTA 32 M/G is a single-phase automatic submersible sewage pump equipped with a Vortex impeller, designed for reliable pumping of wastewater and sewage. The Vortex impeller configuration provides effective handling of wastewater and suspended solids while reducing the risk of clogging. The pump features a 2" discharge outlet and operates on a 230V/50Hz single-phase power supply. The COMPATTA 32 M/G is designed for automatic operation and can be installed as a free-standing unit for straightforward installation and maintenance. As an optional installation configuration, it can also be mounted on a guide rail system, making it suitable for fixed installations where convenient pump removal and servicing are required. The pump is supplied complete with a 10 m power cable, providing flexibility during installation.

The NAKAYAMA NP1150 is a compact 75W submersible fountain pump designed for continuous water circulation in fountains, decorative water features and similar indoor or outdoor applications. With a maximum flow rate of 2,600 L/h (2.6 m³/h), the pump achieves a maximum head of 2.6 m and a maximum pressure of 0.26 bar, providing efficient water circulation for small fountains and decorative installations. The NP1150 is designed for 100% silent operation, making it suitable for applications where low noise levels are important. It can be used in both indoor and outdoor environments. The pump operates on a 220V / 50Hz power supply and can be installed at a maximum depth of 3 m. Its compact dimensions of 23 × 23 × 19 cm allow easy integration into a variety of fountain and water-feature installations.

The Einhell GC-DW 1000 N is a powerful 1000W submersible deep well pump designed for pumping clean water from wells, boreholes, cisterns and other deep water sources. It is suitable for applications such as garden irrigation and water supply where reliable pressure generation is required. The pump features a multi-stage impeller system for efficient pressure generation and reliable water delivery. Its durable pump housing is manufactured from rust-resistant high-grade stainless steel, providing excellent corrosion resistance and long service life. An integrated non-return valve helps prevent water from flowing back when the pump stops, while the high-quality mechanical seal provides additional durability during continuous submerged operation. A stainless steel dirt screen helps protect the hydraulic system from larger particles. For additional motor protection, the GC-DW 1000 N features thermal overload protection. The robust pressure connector incorporates a stainless steel insert, while the easily accessible hose connection on the top of the pump simplifies installation. The pump is equipped with two suspension eyelets and comes with a 22 m lowering rope, allowing secure positioning and retrieval from deep wells and boreholes.

Water storage tanks provide a safe, reliable, and efficient solution for storing clean water in residential, commercial, and industrial applications. Designed for durability and hygienic water storage, they help ensure a continuous water supply and are suitable for a wide range of applications, from domestic use and irrigation to backup water supply systems.

The CFA25-40-180 is a high energy-efficient circulator pump designed for reliable water circulation in heating, hot-water circulation and other compatible circulation systems. Featuring a multistage centrifugal pump structure and electric operation, it provides efficient and dependable circulation while being suitable for installations where continuous and automatic pumping performance is required. The pump features a stainless steel construction, offering good durability and resistance to corrosion. It operates on a 230V/50Hz power supply and provides a maximum head of 4 m. Its compact circulator configuration makes the CFA25-40-180 suitable for integration into domestic and light commercial water circulation systems.