AQUASTRONG ECMIm2-50SE 0.55kW / 0.75HP Intelligent Stainless Steel Multistage Centrifugal Water Pump - AQS-ECMHM2-50-ONE

High-quality oval oil tank with feet designed for safe, reliable, and efficient storage of heating oil in residential, commercial, and professional installations. Its oval design allows efficient use of available space, while the integrated support feet provide enhanced stability and secure floor positioning. The durable construction ensures reliable performance and long-term use.

Max Fuel Tank Size : 4,2lt                                              Suction Port Diameter : 50mm Discharge Port Diameter : 50mm            Engine Type:OHV          Air Cooling:4 Stroke Displacement cc: 196 Head m: 55 Maximum Flow Lt/H: 30 Packaging Weight kg: 31 Net Weight: 29 Single Package Dimensions cm: 43x47x55

The Einhell GC-DP 7835 is a powerful and reliable submersible dirty-water pump designed for demanding drainage and water-removal applications. With its 780W motor and maximum flow rate of 15,700 L/h (15.7 m³/h), it provides efficient pumping of dirty water from flooded areas, tanks, pits, construction sites and other drainage applications. The pump delivers a maximum head of 8 m and a maximum delivery pressure of 0.8 bar. One of its key advantages is its ability to handle solid particles up to 35 mm, making it particularly suitable for heavily contaminated water containing larger suspended particles and debris. The GC-DP 7835 can operate at a maximum immersion depth of 7 m and is suitable for water temperatures up to 35°C. Pump operation can begin from a minimum water level of approximately 50 mm. Its pump housing is manufactured from impact-resistant plastic, providing a durable yet practical construction. An integrated carrying handle facilitates transportation, while the built-in cable winder allows neat and convenient storage of the power cable. The pump comes with a 10 m power cable and features a 47.8 mm (G1½") pressure connection, providing a practical solution for a wide range of dirty-water drainage applications.

The AQUASTRONG EKP750 is a high-performance self-priming filtration pump designed for water circulation and filtration in swimming pools, spas, hot springs, and small to medium-sized pools. Its high flow capacity ensures efficient filtration and reliable water circulation for consistently clean pool water. The pump features an integrated pre-filter that captures leaves, hair, and larger debris before they reach the impeller, protecting the pump and reducing maintenance requirements. Constructed with durable plastic wet-end components and an aluminium motor, the EKP750 includes thermal motor protection, IPX5 protection, Class F insulation, and is rated for continuous duty (S1). Standard 1½-inch UPVC connectors ensure quick and easy installation in most pool filtration systems.

The AQUASTRONG SMART3-45 is a compact commercial booster pump designed to deliver reliable water pressure for medium-sized commercial buildings and multi-dwelling installations. Powered by a 750W motor, it provides consistent performance and dependable operation for demanding water boosting applications. With a maximum head of 45 m and a maximum flow rate of 5.5 m³/h, it ensures efficient water distribution and excellent hydraulic performance. The integrated Intelligent Protection system safeguards the motor during operation, enhancing reliability and extending the pump's service life. Designed for clean water applications, the SMART3-45 handles liquid temperatures up to 95°C while maintaining a low operating noise level of only 50 dB, making it an excellent choice for commercial installations requiring quiet operation.

The Einhell 1300W Submersible Dirty Water Pump is a high-performance solution designed for demanding drainage and dirty-water pumping applications. With a powerful 1300W motor and maximum flow rate of 23,000 L/h (23 m³/h), it is suitable for rapidly removing large volumes of water from flooded areas, tanks, pits and other drainage applications. The pump provides a maximum delivery head of 10 m and maximum pressure of 1 bar. Its ability to handle solid particles up to 40 mm makes it particularly suitable for heavily contaminated water containing larger suspended particles and debris. Designed for submerged operation, the pump can operate at a maximum immersion depth of 5 m and handle water temperatures up to 35°C. For high-volume discharge, it features a large 59.6 mm (2" IG) pressure connection. The supplied 10 m power cable provides additional flexibility when installing the pump in tanks, pits and other submerged locations.

The IMAS IM25-8S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The IMAS IM25-8S-180B is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The pump body is manufactured from brass and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective sleeve, stator sleeve and sealing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180B can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The AQUASTRONG EF-01B is a water level float switch designed for the automatic start and stop control of compatible water pumps according to liquid level. It is suitable for water tanks, reservoirs, drainage systems and other applications requiring automatic liquid-level control. The balance block allows the float's operating position and switching range to be adjusted during installation, providing greater flexibility according to the required minimum and maximum water levels. This version comes with a 10 m H07-RN-F cable, making it particularly suitable for installations where a longer cable length is required. AQUASTRONG technical documentation lists 10 m as one of the available cable lengths for the EF-01B, together with electrical ratings of 16(8)A / 250V and 16(14)A / 125V. The EF-01B is designed for a service life of approximately 5,000 operating cycles. Its operating limits allow use with liquids at temperatures up to 35°C and a maximum ambient temperature of 40°C.

High-quality horizontal water tanks with feet designed for safe, reliable, and efficient water storage in residential, commercial, and industrial applications. Their horizontal design and integrated support feet provide enhanced stability and secure floor installation, while the durable construction makes them suitable for domestic water storage, irrigation, and backup water supply systems.