DRENO COMPATTA 4MG Automatic submersible sewage Vortex pump 2" single phase 230V - 04-0012

The NAKAYAMA NP1150 is a compact 75W submersible fountain pump designed for continuous water circulation in fountains, decorative water features and similar indoor or outdoor applications. With a maximum flow rate of 2,600 L/h (2.6 m³/h), the pump achieves a maximum head of 2.6 m and a maximum pressure of 0.26 bar, providing efficient water circulation for small fountains and decorative installations. The NP1150 is designed for 100% silent operation, making it suitable for applications where low noise levels are important. It can be used in both indoor and outdoor environments. The pump operates on a 220V / 50Hz power supply and can be installed at a maximum depth of 3 m. Its compact dimensions of 23 × 23 × 19 cm allow easy integration into a variety of fountain and water-feature installations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The Einhell GC-SP 3580 LL is a powerful and versatile 350W submersible clear-water pump, designed for draining swimming pools, rainwater tanks, flooded basements, cisterns and other clean-water applications. It delivers a maximum flow rate of 8,000 L/h and a maximum delivery head of 7.5 m. One of its key features is its extremely low-level flat suction capability. The pump can start operating from a water level of just 8 mm and can continue draining down to approximately 1 mm of residual water, providing an almost wipe-dry result on a flat surface. The infinitely adjustable float switch allows automatic start and stop according to the water level. An integrated non-return valve helps prevent water from flowing back when the pump switches off, while the high-quality mechanical seal contributes to long and reliable service life. For flexible installation, the GC-SP 3580 LL supports 25/38 mm hoses and a 33.3 mm (1") male thread, as well as a 47.8 mm (1½") connection via the supplied 90° adapter. A Quick-Connector is also included for fast hose changes. The pump comes with a 10 m power cable, integrated cable winder and carrying handle for convenient transport and storage.

The Einhell GC-DP 7835 is a powerful and reliable submersible dirty-water pump designed for demanding drainage and water-removal applications. With its 780W motor and maximum flow rate of 15,700 L/h (15.7 m³/h), it provides efficient pumping of dirty water from flooded areas, tanks, pits, construction sites and other drainage applications. The pump delivers a maximum head of 8 m and a maximum delivery pressure of 0.8 bar. One of its key advantages is its ability to handle solid particles up to 35 mm, making it particularly suitable for heavily contaminated water containing larger suspended particles and debris. The GC-DP 7835 can operate at a maximum immersion depth of 7 m and is suitable for water temperatures up to 35°C. Pump operation can begin from a minimum water level of approximately 50 mm. Its pump housing is manufactured from impact-resistant plastic, providing a durable yet practical construction. An integrated carrying handle facilitates transportation, while the built-in cable winder allows neat and convenient storage of the power cable. The pump comes with a 10 m power cable and features a 47.8 mm (G1½") pressure connection, providing a practical solution for a wide range of dirty-water drainage applications.

The Einhell GC-PP 900 N is a powerful 900W submersible pressure pump designed for pumping clean water from wells, cisterns and rainwater reservoirs. With a maximum flow rate of 6,000 L/h (6 m³/h), it is ideal for garden irrigation and other applications requiring efficient water delivery at high pressure. Its multi-stage impeller system enables the pump to generate a maximum delivery head of 32 m, providing the pressure required for demanding irrigation and water supply applications. The GC-PP 900 N can operate at a maximum immersion depth of 7 m and is suitable for pumping water at temperatures up to 35°C. The pump operates on a 230V / 50Hz power supply and features a 33.3 mm (G1") hose connection. It comes with a 10 m H07RN-F power cable, providing flexibility when installing the pump in wells, tanks and other submerged applications.

The AQUASTRONG EKS-1100SE is a stainless steel multistage submersible water pump designed for domestic and light-commercial drainage and water-transfer applications. It is suitable for clean and slightly dirty water, providing a reliable solution for tanks, basements, rainwater systems, irrigation and emergency water removal. Powered by a 1100W (1.5HP) motor, the EKS-1100SE delivers a maximum flow rate of 6 m³/h (100 L/min) and a maximum head of 45 m. Its multistage hydraulic design provides increased lifting capability while maintaining a practical flow rate for water-transfer applications. AQUASTRONG catalogue data also specifies 45 m maximum head and up to approximately 5 m³/h at the lower end of the performance curve. The pump features a stainless steel multistage construction, IPX8 protection, Class F insulation and built-in thermal motor protection. Its 1" outlet allows connection to suitable pipework, while the integrated float switch provides automatic start and stop according to the water level. Suitable for liquid temperatures up to 35°C, the EKS-1100SE is designed for fully submerged operation and can operate at a maximum immersion depth of 12 m according to the supplied model specifications. Comes with a 15 m power cable.

The AQUASTRONG ECMIM4-60 is a stainless steel multistage centrifugal surface pump designed for reliable water supply, pressure boosting and water circulation in domestic, agricultural and commercial applications. It is suitable for household water supply, equipment support, pipeline pressurization, garden and greenhouse watering, fish farming and poultry operations. The ECMI series can also be used for industrial water supply and drainage, high-rise buildings, central air-conditioning and centralized heating circulation systems. Powered by a 1.1kW (1.5HP) motor, the ECMIM4-60 delivers a maximum flow rate of 7 m³/h (117 L/min) and a maximum head of 61.5 m. Its multistage centrifugal design combines high flow capacity with strong pressure performance, making it particularly suitable for installations with increased water demand and higher pressure requirements. The pump features an AISI 304 stainless steel shaft and is suitable for liquid temperatures up to 60°C, ambient temperatures up to 50°C, operation at altitudes up to 1,000 m, and a maximum working pressure of 8 bar. The motor features copper windings, built-in thermal protection, Class F insulation and IP55 protection. Comes with a 1.6 m power cable with UK plug.

High-quality 1000L oval oil tank designed for safe, reliable, and efficient storage of heating oil in residential, commercial, and professional installations. Its oval design provides a practical solution for areas where efficient use of available space is important, while its durable construction ensures stability and dependable long-term performance.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The Einhell GE-PP 1100 N-A is a powerful 1100W submersible high-pressure water pump designed for pumping clean water from wells, cisterns, reservoirs and other water sources. With a maximum flow rate of 6,000 L/h (6 m³/h) and a maximum delivery head of 45 m, it is suitable for demanding garden irrigation and water supply applications requiring high pressure. The multi-stage impeller system generates a maximum delivery pressure of 4.5 bar, providing efficient water delivery even where higher operating pressure is required. The pump features an automatic function, allowing operation according to water demand. Integrated dry-running protection helps protect the pump when insufficient water is available, while an overload switch provides additional protection for the motor. Its robust pump housing is manufactured from rust-resistant stainless steel, providing excellent corrosion resistance and durability. The pressure connection is reinforced with a stainless steel insert, while the high-quality mechanical seal contributes to a long and reliable operating life. The GE-PP 1100 N-A can operate at a maximum immersion depth of 12 m and is suitable for water temperatures up to 35°C. It comes with a 15 m power cable, providing flexibility for installation in deeper tanks, cisterns and wells.