AQUASTRONG SMART12-55 2200W Commercial Booster Pump with Permanent Magnet Motor - AQS-SMART12-55

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The Einhell GC-DP 9040 N is a powerful 900W submersible dirty water pump designed for efficiently pumping heavily contaminated water from ponds, construction sites, flooded areas, tanks and other water reservoirs. With a maximum flow rate of 22,000 L/h (22 m³/h), the pump delivers a maximum head of 9 m and a maximum delivery pressure of 0.9 bar. It can handle foreign particles with a diameter of up to 40 mm, making it suitable for demanding dirty water drainage applications. The pump features an infinitely height-adjustable float switch for automatic operation according to the water level. Its durable housing combines impact-resistant plastic and stainless steel, while the high-quality ceramic/rubber mechanical seal contributes to reliable operation and long service life. The GC-DP 9040 N features a large 59.6 mm (2" IG) pressure connection and includes suitable connectors for flexible installation. The integrated carrying handle makes transportation and positioning easier. With a maximum immersion depth of 7 m, a maximum water temperature of 35°C and a 10 m power cable, the pump provides a practical solution for high-volume dirty water drainage.

The AQUASTRONG ECMIm2-50SE is an Intelligent stainless steel multistage centrifugal surface pump designed for pressure boosting, household water supply, automatic irrigation and other applications requiring reliable clean-water transfer. Its integrated PCL microcomputer chip provides Intelligent control of the pump according to water demand. The system features automatic start and stop, delay-start protection and no-water protection, combining convenient automatic operation with additional protection for the pump. Powered by a 0.55kW (0.75HP) single-phase motor, the ECMIm2-50SE delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 44 m. Its multistage hydraulic design provides strong pressure performance across a wide range of flow requirements, making it suitable for household water systems, pressure boosting and automatic watering. The motor features copper windings, built-in thermal protection, Class F insulation and IPX4 protection. The pump can transfer clean water or other liquids with similar physical and chemical properties. It operates with liquid temperatures from 4°C to 60°C, ambient temperatures up to 50°C, and a maximum working pressure of 10 bar. Comes with a 1.6 m power cable with UK plug.

The AQUASTRONG EPCP-250P is a compact submersible clean-water pump with pre-filter, designed for reliable water circulation, drainage and general water-transfer applications. It is suitable for clean or slightly dirty water and can be used for pool circulation, garden irrigation, small fountains and general clean-water transfer. The integrated pre-filter helps prevent larger debris from entering the hydraulic section of the pump, supporting dependable operation. Powered by a 250W motor, the EPCP-250P delivers a maximum flow rate of 8 m³/h (133.3 L/min) and a maximum head of 5 m. Its performance curve provides a good balance between flow and head, making it particularly suitable for applications where relatively high water circulation is required at low operating heads. Its submersible configuration provides a compact and practical solution for installations where the pump operates directly within the water.

The BORMANN PRO BGB1080 is a powerful petrol high-pressure water pump designed for applications requiring high delivery pressure and reliable water transfer without access to an electrical power supply. It is suitable for irrigation, agricultural use, water transfer and other demanding outdoor pumping applications. Powered by a 196cc petrol engine with an output of 6.5HP, the pump delivers a maximum flow rate of 18 m³/h (18,000 L/h) and reaches a maximum delivery head of 80 m, making it particularly suitable for applications where water needs to be transferred over significant height differences or distances. The pump features an aluminium pump body, combining durability with reduced weight. It is equipped with a 1.5" suction inlet and provides 1.5" / 1" discharge outlets, offering flexibility for different water delivery requirements. The 4.2 L fuel tank provides practical operating capacity, while the 0.6 L oil capacity supports proper engine lubrication. With a net weight of 21 kg, the unit combines robust construction with practical portability. The BGB1080 is supplied with a fitting set and suction filter, providing the essential accessories for installation and operation.

High-quality oval oil tank with feet designed for safe, reliable, and efficient storage of heating oil in residential, commercial, and professional installations. Its oval design allows efficient use of available space, while the integrated support feet provide enhanced stability and secure floor positioning. The durable construction ensures reliable performance and long-term use.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The DRENO COMPATTA 4MG is a single-phase automatic submersible sewage pump equipped with a Vortex impeller, designed for pumping wastewater, sewage and dirty water. The Vortex impeller design provides effective handling of wastewater containing suspended solids while helping reduce the risk of clogging. The pump features a 2" discharge outlet and operates from a 230V single-phase power supply. The automatic configuration allows the pump to start and stop according to the liquid level, making it suitable for wastewater pits, sumps, drainage systems and other applications requiring automatic operation. The COMPATTA 4MG can be installed as a free-standing pump, providing a simple and practical installation solution. For permanent installations, it can optionally be mounted on a guide rail system, allowing easier removal of the pump for inspection and maintenance.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion vessels with legs are essential components in heating and hydraulic systems, designed to absorb the expansion of water caused by temperature changes and help maintain stable system pressure. Their integrated support legs provide stable floor installation, while the vessel helps compensate for variations in water volume, prevent excessive pressure build-up, reduce stress on system components, and support reliable and efficient operation.