AQUASTRONG ECMIM4-30 0.55kW / 0.75HP Stainless Steel Multistage Centrifugal Water Pump - AQS-ECHM4-30

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The AQUASTRONG EF-01B is a water level float switch designed for the automatic start and stop control of compatible water pumps according to liquid level. It is suitable for water tanks, reservoirs, drainage systems and other applications requiring automatic liquid-level control. The balance block allows the float's operating position and switching range to be adjusted during installation, providing greater flexibility according to the required minimum and maximum water levels. This version comes with a 10 m H07-RN-F cable, making it particularly suitable for installations where a longer cable length is required. AQUASTRONG technical documentation lists 10 m as one of the available cable lengths for the EF-01B, together with electrical ratings of 16(8)A / 250V and 16(14)A / 125V. The EF-01B is designed for a service life of approximately 5,000 operating cycles. Its operating limits allow use with liquids at temperatures up to 35°C and a maximum ambient temperature of 40°C.

The AQUASTRONG ERP25-60/180 is a multi-speed circulation pump designed for efficient water circulation in HVAC, domestic hot water, and solar heating systems. Its three-speed operation allows users to optimize performance according to system requirements, improving efficiency while reducing energy consumption. With a maximum head of 6.1 metres and a maximum flow rate of 68 L/min, it is ideal for residential and light commercial heating systems. Its robust construction ensures reliable, quiet, and long-lasting performance. The ERP25-60/180 is suitable for: HVAC systems Domestic hot water circulation Solar heating systems Residential and light commercial heating applications

Water storage tanks provide a safe, reliable, and efficient solution for storing clean water in residential, commercial, and industrial applications. Designed for durability and hygienic water storage, they help ensure a continuous water supply and are suitable for a wide range of applications, from domestic use and irrigation to backup water supply systems.

The AQUASTRONG ECMI(m)2-3SE is an Intelligent stainless steel multistage centrifugal surface pump designed for pressure boosting, household water supply and automatic irrigation applications. Its integrated PCL microcomputer chip provides automatic control of pump operation, offering a practical solution for water supply systems where automatic operation and additional protection are required. The Intelligent control system provides automatic start and stop, delay-start protection and no-water protection, helping protect the pump and ensuring reliable operation according to water demand. Powered by a 0.37kW (0.5HP) single-phase motor, the pump delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 27 m. Its multistage hydraulic design provides consistent pressure across a wide operating range. The motor features copper windings, built-in thermal protection, Class F insulation and IPX4 protection. The pump is suitable for clean water or liquids with similar physical and chemical properties, with an operating liquid temperature range of 4–60°C, a maximum ambient temperature of 50°C, and a maximum working pressure of 10 bar.   Comes with a 1.6 m power cable with UK plug.

The Einhell GC-DW 1300 N is a powerful and reliable deep well pump designed for pumping clean water from wells, boreholes, cisterns and other deep water sources. With a powerful 1300W motor, it delivers a maximum flow rate of 5,000 L/h (5 m³/h) and a maximum delivery head of 65 m. Its high delivery pressure of up to 6.5 bar makes the pump particularly suitable for applications where water needs to be transported over considerable vertical distances, such as garden irrigation and domestic water supply from deep wells. The pump features a durable corrosion-resistant stainless steel housing designed for long service life. It is equipped with an external switch box and two suspension eyelets for secure installation in a well or borehole. The GC-DW 1300 N can operate at a maximum immersion depth of 20 m and is suitable for water temperatures up to 35°C. The robust 47.8 mm (G1½" IG) pressure connection provides a reliable connection to the delivery pipework.

The AQUASTRONG EPCP-250P is a compact submersible clean-water pump with pre-filter, designed for reliable water circulation, drainage and general water-transfer applications. It is suitable for clean or slightly dirty water and can be used for pool circulation, garden irrigation, small fountains and general clean-water transfer. The integrated pre-filter helps prevent larger debris from entering the hydraulic section of the pump, supporting dependable operation. Powered by a 250W motor, the EPCP-250P delivers a maximum flow rate of 8 m³/h (133.3 L/min) and a maximum head of 5 m. Its performance curve provides a good balance between flow and head, making it particularly suitable for applications where relatively high water circulation is required at low operating heads. Its submersible configuration provides a compact and practical solution for installations where the pump operates directly within the water.

The NAKAYAMA PRO SP1315 is a powerful 1300W submersible sewage pump designed for pumping dirty water and wastewater in demanding drainage and sewage applications. The pump is equipped with an unshrouded cutting impeller, allowing it to handle wastewater containing solids and helping reduce the risk of clogging during operation. Its robust design makes it suitable for sewage pits, drainage systems and other applications involving heavily contaminated water. With a maximum flow rate of 18,000 L/h (18 m³/h) and a maximum delivery head of 12 m, the SP1315 provides high pumping capacity for demanding installations. It can operate at a maximum immersion depth of 7 m and with water temperatures up to 40°C. The pump operates on a 220V/50Hz power supply and features a large 2" discharge outlet for efficient wastewater discharge. It comes with an 8 m power cable, while its compact dimensions of 42 × 37 × 20 cm facilitate installation in wastewater pits and drainage systems.

The AQUASTRONG ERP TAK is a multi-speed circulation pump designed for efficient water circulation in HVAC, domestic hot water, and solar heating systems. With three selectable speed settings, it allows users to match pump performance to system requirements, improving energy efficiency and overall operating performance. Ideal for residential and light commercial installations, the pump provides reliable, quiet operation and easy installation in both new and existing heating systems. It is suitable for: HVAC systems Domestic hot water circulation Solar water heating systems Residential and light commercial heating applications

The IMAS IM25-8S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.