AQUASTRONG ECMIM2-30 0.37kW / 0.5HP Stainless Steel Multistage Centrifugal Water Pump - EMHM2-30

The AQUASTRONG ERP25-80/180 is a multi-speed circulation pump designed for efficient water circulation in HVAC, domestic hot water, and solar heating systems. Its three-speed operation allows performance to be adjusted according to system requirements, improving efficiency while reducing energy consumption. With a maximum head of 7.1 metres and a maximum flow rate of 120 L/min, it is ideal for larger residential and light commercial heating systems, domestic hot water circulation, and solar heating applications. Its durable construction ensures reliable, quiet, and long-lasting performance. The ERP25-80/180 is suitable for: HVAC systems Domestic hot water circulation Solar heating systems Residential and light commercial heating applications

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

The AQUASTRONG EKP1100 is a high-performance self-priming filtration pump designed for water circulation and filtration in swimming pools, spas, hot springs, and medium to large swimming pools. With 1100W of power, a maximum flow rate of 375 L/min, and a maximum head of 16 metres, it delivers excellent performance for demanding pool filtration systems. The integrated pre-filter captures leaves, hair, and larger debris before they reach the impeller, protecting the pump and reducing maintenance requirements. Constructed with durable plastic wet-end components and an aluminium motor, the EKP1100 features thermal motor protection, IPX5 protection, Class F insulation, and is rated for continuous duty (S1). Dual Ø48.5 mm and Ø60.3 mm connectors provide flexible installation with standard pool piping systems.

The IMAS IM25-6-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating under pressure in closed or open circuits. The pump features three selectable operating speeds, with power consumption of 46W, 67W and 93W, allowing its performance to be adjusted according to the requirements of the installation. It provides a maximum flow rate of 4.1 m³/h and a maximum head of 6 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and sealing flange are manufactured from stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-6-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The AQUASTRONG ECMIm2-40 is an Intelligent stainless steel multistage centrifugal surface pump designed for pressure boosting, household water supply, automatic irrigation and other clean-water applications. Its integrated PCL microcomputer chip provides intelligent pump control according to water demand. The system features automatic start and stop, delay-start protection and no-water protection, providing convenient automatic operation while helping protect the pump against unsuitable operating conditions. Powered by a 0.37kW (0.5HP) single-phase motor, the ECMIm2-40 delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 36 m. Its multistage hydraulic design provides consistent pressure performance across a wide range of flow requirements. The motor features copper windings, built-in thermal protection, Class F insulation and IPX4 protection. The pump is suitable for transferring clean water or other liquids with similar physical and chemical properties, with a liquid temperature range of 4–60°C, maximum ambient temperature of 50°C, and maximum working pressure of 10 bar. Comes with a 1.6 m power cable with UK plug.

The AQUASTRONG ECMIm2-60SE is an Intelligent stainless steel multistage centrifugal surface pump designed for pressure boosting, household water supply, automatic irrigation and other applications requiring reliable clean-water transfer. Its integrated PCL microcomputer chip provides Intelligent control of pump operation according to water demand. The system features automatic start and stop, delay-start protection and no-water protection, providing convenient automatic operation while helping protect the pump during unsuitable operating conditions. Powered by a 0.75kW (1HP) single-phase motor, the ECMIm2-60SE delivers a maximum flow rate of 4.5 m³/h (75 L/min) and a maximum head of 54 m. Its multistage hydraulic design provides strong pressure performance across a wide operating range, making it particularly suitable for applications requiring increased water pressure. The motor features copper windings, built-in thermal protection, Class F insulation and IPX4 protection. The pump is suitable for transferring clean water or other liquids with similar physical and chemical properties. It operates with liquid temperatures from 4°C to 60°C, ambient temperatures up to 50°C, and a maximum working pressure of 10 bar. Comes with a 1.6 m power cable with UK plug.

The Einhell GC-SP 3580 LL is a powerful and versatile 350W submersible clear-water pump, designed for draining swimming pools, rainwater tanks, flooded basements, cisterns and other clean-water applications. It delivers a maximum flow rate of 8,000 L/h and a maximum delivery head of 7.5 m. One of its key features is its extremely low-level flat suction capability. The pump can start operating from a water level of just 8 mm and can continue draining down to approximately 1 mm of residual water, providing an almost wipe-dry result on a flat surface. The infinitely adjustable float switch allows automatic start and stop according to the water level. An integrated non-return valve helps prevent water from flowing back when the pump switches off, while the high-quality mechanical seal contributes to long and reliable service life. For flexible installation, the GC-SP 3580 LL supports 25/38 mm hoses and a 33.3 mm (1") male thread, as well as a 47.8 mm (1½") connection via the supplied 90° adapter. A Quick-Connector is also included for fast hose changes. The pump comes with a 10 m power cable, integrated cable winder and carrying handle for convenient transport and storage.

Expansion vessels are essential components in heating and hydraulic systems, designed to absorb the expansion of water caused by temperature changes and help maintain stable system pressure. By compensating for variations in water volume, they help prevent excessive pressure build-up, reduce stress on system components, and contribute to reliable and efficient operation.

Compact water pump for light applications This compact electric water pump is suitable for pumping water from a well, for example. A handy tool for pumping water out of indoor premises. Easy to set up, with a capacity of 140 l/min.