ISOMAT AEGEAN Hybrid waterproofing roof coating white 1kg

Polyhybrid, elastomeric, liquid waterproofing membrane

for flat roofs with timeless whiteness

Description

ISOFLEX-AEGEAN is a polyhybrid, elastomeric,

water-based, liquid waterproofing membrane for

flat roofs formulated with a blend of resins,

featuring also timeless whiteness and durability.

Has excellent adhesion to a variety of substrates,

including concrete, wood, metal and any type of

waterproofing membranes and is applicable even

to irregular substrates. After curing, it forms a

continuous, elastic, waterproof and vaporpermeable membrane, without seams or joints,

offering:

• High elasticity

• High resistance to weather and aging

• Timeless whiteness and high solar reflectance

• Building energy efficiency improvement by

decreasing the roof surface temperature

• Resistance to ponding water

Certified according to EN 1504-2 and classified as

a coating for surface protection of concrete.

CE marked. Certificate No.: 2032-CPR-10.11.

Fields of application

ISOFLEX-AEGEAN is ideal for waterproofing flat

roofs, curved roofs, etc. Constitutes a simple and

safe waterproofing solution for roof details, such as

corners, edges and joints between different

adjacent materials, as well as for isolated cracks.

Furthermore, thanks to its high solar reflectance, it

can be used as a cool roof coating.

Technical data

Color: white

Density: 1.39 ± 0.02 kg/l

Elongation at break: 350%

(EN ISO 527)

Capillary water

absorption: 0.01 kg/m2

·h

0.5

(EN 1062-3, requirement of

EN 1504-2: w < 0.1 kg/m2

·h

0.5)

Water vapor

permeability: Sd = 0.40 m

(EN ISO 7783-2,

vapor-permeable, Class I, Sd < 5 m)

Adhesion strength: 2.9 N/mm2

(EN 1542, requirement

for flexible systems

with no traffic: 0.8 N/mm2

)

Artificial weathering: Pass (no blistering,

(EN 1062-11, cracking or

after 2000 h) flaking)

Reaction to fire: Euroclass F

(EN 13501-1)

Minimum application

temperature: +5°C

Service temperature: from -25°C to +80°C

Viscosity: ≈ 30,000 mPa·s

(EN ISO 2884-2)

Drying time at +20°C: 2 h (touch dry)

(EN ISO 2811-1)

Recoat time at +20°C: 20 h (touch dry)

(EN ISO 2811-1)

Directions for use

1. Substrate preparation

The substrate must be dry, clean, free of grease,

loose particles, dust, etc. Any existing cavities in

concrete should be repaired in advance. The

substrate is then primed with the special primer

ISO-PRIMER with a consumption of approx.

200 g/m2

.

2. Application – Consumption

a) Full-surface waterproofing

As soon as the primer has dried, ISOFLEXAEGEAN is applied by brush or roller either in two

layers with a consumption of 0.5-0.75 kg/m2

/layer,

depending on the substrate.

The second layer should be applied crosswise,

after the first one is dry and walkable.

In areas of severe cracks, it is recommended to

locally reinforce ISOFLEX-AEGEAN with a 10 cm

wide strip of fiberglass mesh (65 g/m2

) or polyester

fleece (30 g/m2

) along the cracks. In that case,

after the primer has dried, a layer of ISOFLEXAEGEAN is applied along the cracks and, while

still fresh, the 10 cm wide strip of fiberglass mesh

or polyester fleece is embedded lengthwise.

Subsequently, two extra layers of ISOFLEXAEGEAN are applied over the entire surface.

The technical information and instructions supplied in this datasheet are based on the knowledge and experience of the Department of Research

and Development of our company and on results from long-term applications of the product in practice. The recommendations and suggestions

referring to the use of the product are provided without guarantee, since site conditions during the applications are beyond the control of our

company. Therefore the user is responsible for confirming that the chosen product is suitable for the envisaged application. The present edition

of this technical datasheet automatically cancels any previous one concerning the same product. | Edition: 23.04.2024

In case there are dense, multiple cracks appearing

all over the surface, it is strongly recommended to

fully reinforce ISOFLEX-AEGEAN membrane with

100 cm wide strips of fiberglass mesh (65 g/m2

) or

polyester fleece (30 g/m2

). These placed strips

must overlap by 5-10 cm. In that case, after the

primer has dried, a layer of ISOFLEX-AEGEAN is

applied as wide as the upcoming reinforcement,

and, while still fresh, a strip of fiberglass mesh or

polyester fleece is embedded. The same

application process is followed over the remaining

surface. Subsequently, two extra layers of

ISOFLEX-AEGEAN are applied over the entire

surface.

Consumption: 2.0-2.5 kg/m2

, depending on the

substrate and the type of reinforcement.

b) Local waterproofing of cracks

In this case, the substrate is primed only across

the cracks to a width of 10-12 cm. After the primer

has dried, a layer of ISOFLEX-AEGEAN is applied

and, while still fresh, a 10 cm wide strip of

fiberglass mesh (65 g/m2

) or polyester fleece

(30 g/m2

) is embedded lengthwise. Subsequently,

two extra ISOFLEX-AEGEAN layers are applied

along the cracks, completely covering the

reinforcement.

Consumption: 200-250 g/m of crack length.

Tools should be cleaned with water while

ISOFLEX-AEGEAN is still fresh.

Packaging

ISOFLEX-AEGEAN is available in 1 kg, 4 kg, 13 kg

and 25 kg containers.

Shelf life – Storage

24 months from production date if stored in

original, unopened packaging at temperatures

between +5°C and +35°C. Protect from direct

sunlight and frost.

Volatile Organic Compounds (VOCs)

According to Directive 2004/42/CE (Annex II, table

A), the maximum allowed VOC content for the

product subcategory i, type WB is 140 g/l (2010)

for the ready-to-use product.

The ready-to-use product ISOFLEX-AEGEAN

contains 4.21 g/l VOC.

ISOMAT S.A.

BUILDING CHEMICALS, MORTARS & PAINTS

HEADQUARTERS – THESSALONIKI, GREECE

17th km Thessaloniki – Ag. Athanasios Road

P.O. BOX 1043, 570 03 Ag. Athanasios, Greece

T +30 2310 576000

www.isomat.eu e-mail: [email protected]

2032

ISOMAT S.A.

17th km Thessaloniki – Ag. Athanasios

P.O. BOX 1043, 570 03 Ag Athanasios, Greece

17

2032-CPR-10.11

DoP No.: ISOFLEX-AEGEAN / 1436-02

EN 1504-2

Surface protection products

Coating

Permeability to CO2: Sd > 50m

Water vapor permeability: Class I (permeable)

Capillary absorption: w < 0.1 kg/m2

·h0.5

Adhesion: ≥ 1.0 N/mm2

Artificial weathering: Passes

Reaction to fire: Euroclass F

Dangerous substances comply with 5.3