AQUAPHOR K2 Activated carbon and Aqualen replacement filter 3 micron - WATFRE-333006

The DIGIFLOW 8000T water flow and filter change meter is your reliable digital companion for monitoring when it's time to replace your water filters. It measures the gallons of water going through your filters, notifying you when it's time to change them.

The AQUAFILTER AICRO-QC is an in-line water filter cartridge filled with coconut shell Granular Activated Carbon (GAC). It is designed to reduce chlorine, organic compounds and selected pesticides, while improving the taste and odour of filtered water. AQUAFILTER particularly recommends this cartridge for use in reverse osmosis systems as a post-filter, and it can also be used with compatible side-by-side refrigerators and water dispensers. With dimensions of 10" × 2" and integrated 1/4" Quick Connect (QC) connections, the cartridge allows straightforward in-line installation. Official AQUAFILTER technical documentation specifies a flow rate of approximately 2.8 L/min, capacity of up to 9,500 L, operating pressure up to 6 bar and operating temperature from 2°C to 45°C. Typical service life is 6–12 months when installed after an RO membrane, depending on water quality and usage.

The PHILIPS AUT811 is a Carbon Block replacement cartridge designed for compatible PHILIPS on-tap water filtration systems, including the AUT1211. Its 3-stage microfiltration provides filtration down to 0.01 micron, helping reduce particulate matter, chlorine, lead and pesticides while improving the taste and odour of tap water. PHILIPS specifies up to 99% chlorine reduction for this cartridge. The cartridge features the PHILIPS QuickTwist design for quick, hygienic replacement without additional tools. It is designed for municipal tap water at an inlet temperature of 5–38°C and pressure of 0.1–0.4 MPa (1–4 bar). Depending on the specific AUT811 market version and operating conditions, PHILIPS documentation specifies a service life of up to 24 months.

The Plastic Pressure Reducer 1/4" Push Fit is a practical plumbing component designed to reduce and regulate water pressure in compatible water supply systems. Its compact construction makes it suitable for installations where controlled water pressure is required. Featuring a 1/4-inch push-fit connection, the reducer allows convenient connection to compatible tubing without requiring traditional threaded fittings. The push-fit design helps simplify installation and maintenance while providing a practical connection solution. Made from plastic, this pressure reducer is suitable for use in compatible water filtration systems and other low-diameter water supply applications. Its compact design allows it to be incorporated into existing installations where pressure reduction is needed. Features Plastic pressure reducer for compatible water supply systems Designed to help reduce incoming water pressure 1/4-inch push-fit connection Push-fit design for convenient tubing connection Suitable for compatible 1/4-inch tubing systems Compact construction for space-efficient installation Helps provide controlled water pressure to connected equipment Suitable for compatible water filtration installations Practical component for plumbing maintenance and replacement Designed for use in systems requiring pressure reduction

The AQUAFILTER FCPS20 is a melt-blown polypropylene sediment cartridge designed for the mechanical filtration of cold water. Manufactured from 100% virgin polypropylene, its depth-filter structure effectively captures sand, silt, rust and suspended solids of 20 micron and larger, making it suitable for potable-water filtration and general water-treatment applications. The cartridge is manufactured without resin binders, lubricants, antistatic agents or other chemical additives. With dimensions of 9 7/8" × 2 1/2", the FCPS20 fits compatible standard 10-inch filter housings and is commonly used as a pre-filtration stage. By capturing sediment before subsequent filtration stages, it helps protect carbon cartridges, RO membranes and other water-treatment components from premature fouling. AQUAFILTER documentation indicates a typical cartridge lifetime of approximately 3–6 months, depending on incoming water quality and contamination level.

The AQUAFILTER FCCBKDF is a replacement water filter cartridge combining coconut shell Granular Activated Carbon (GAC) with KDF filtration media. The activated carbon effectively adsorbs chlorine, organic compounds and substances responsible for unpleasant taste and odour, while the KDF media enhances the cartridge's treatment capabilities and helps reduce selected heavy metals from the incoming water. The combination of GAC and KDF provides complementary filtration, making the cartridge suitable for improving the quality and organoleptic properties of drinking water. The KDF media also provides bacteriostatic properties, helping inhibit bacterial growth within the cartridge. With dimensions of 9 7/8" × 2 1/2", it is designed for compatible standard 10-inch filter housings and can be incorporated into domestic and multi-stage water filtration systems.

The NOGA NW525 is a compact activated carbon replacement cartridge designed for water filtration applications where improvement of the taste and odour of the water is required. Activated carbon works through adsorption, helping reduce chlorine and organic compounds responsible for undesirable taste and odour in mains water. With compact dimensions of 5" × 2.5", the cartridge is suitable for compatible 5-inch filter housings and can be incorporated into domestic drinking-water filtration systems. Its compact format makes it particularly useful in installations where available space is limited, either as a dedicated carbon filtration stage or as part of a multi-stage filtration system.

The NOGA NW5300 Siliphos is a 1 kg pack of sodium polyphosphate-based anti-scale media, intended for use in compatible refillable water-treatment cartridges and dosing systems. Siliphos gradually dissolves into the water and helps inhibit the formation of hard scale and mineral deposits, providing protection for pipes, water heaters and other water-using equipment. Rather than removing calcium and magnesium through conventional ion-exchange softening, Siliphos works primarily by stabilising hardness minerals and inhibiting scale formation. It can also help form a protective layer on metallic surfaces, contributing to corrosion protection within compatible water installations. The bead form allows convenient refilling and replacement of the treatment media when required.

Next-generation instant water filter Powered by the highly porous activated carbon fibre, Philips Micro X-Clean Instant filter turns tap water into crisp and pure tasting water by reducing chlorine, lead, pesticide and microplastics.

The PHILIPS AWP3703 X-Guard is a compact on-tap water filtration system designed to provide better-tasting drinking water directly from the kitchen faucet. Its X-Guard cartridge uses high-quality natural activated carbon, reducing up to 99% of chlorine and taste-impairing substances while maintaining a convenient flow for everyday drinking and cooking. The system provides three selectable water modes: filtered stream, unfiltered stream and unfiltered shower mode, allowing filtered water to be used only when required and helping extend cartridge life. It delivers a filtered-water flow rate of 2 L/min and a filtration capacity of up to 1,000 L. The QuickTwist mechanism allows easy filter replacement, while the supplied faucet adapters make installation straightforward on compatible kitchen faucets.