Water Filtration

The NOGA NW4391 TX is a 2-piece Quick Change replacement filter set designed for the NOGA NW4387 2-stage under-sink water filtration system. The NW4387 system is independently listed as a two-stage NOGA TX Quick Change system, designed for installation under the kitchen sink. The set consists of the two filtration stages shown on the cartridges: a sediment filter and an activated carbon filter. The sediment stage provides mechanical pre-filtration, helping capture sand, rust, silt and other suspended particles. The activated carbon stage helps reduce chlorine and substances responsible for undesirable taste and odour, improving the quality and taste of drinking water. The TX Quick Change cartridge design allows the filters to be replaced as complete sealed units, providing a convenient and hygienic solution for routine maintenance of the compatible NW4387 system.

The NOGA NW4392 TX is a 3-piece Quick Change replacement filter set specifically designed for the NOGA NW4388 3-stage water filtration system. An independent NOGA retailer confirms the exact NW4392 code, its compatibility with NW4388, and that the pack contains three replacement cartridges. The three-stage configuration provides complementary water treatment. The sediment stage removes particles such as sand and rust, while the carbon filtration stage helps reduce chlorine and unpleasant odours. The third stage contains scale-inhibiting phosphate crystals, helping limit the formation of limescale in the downstream installation. The TX Quick Change design allows the cartridges to be replaced as complete units, making routine maintenance of the compatible NW4388 system quicker and more convenient. The NW4388 is designed as an under-sink system that supplies filtered water through a separate faucet and can also be connected to compatible appliances such as refrigerators and hot/cold water dispensers.  

The NOGA NW5060 is a water feed valve designed to provide and control the water supply to compatible drinking water filtration and reverse osmosis systems. The valve connects to the water supply line and creates a dedicated feed point for the filtration system. Its integrated lever shut-off valve allows the water supply to the filter to be opened or closed independently, making installation, cartridge replacement and routine maintenance more convenient without having to interrupt the entire water supply. Its compact metal construction makes it suitable for under-sink installations, where it can be used as part of the connection between the mains cold-water supply and the filtration system.

The NOGA NW5091 is a compression adapter designed for use in water filtration and reverse osmosis installations. It provides a practical connection point between the existing water supply and the tubing used to feed a compatible filtration system. Its angled configuration makes it suitable for compact under-sink installations, where available space around the water supply connection may be limited. The threaded connection allows the adapter to be integrated into compatible plumbing fittings, while the side port provides the connection point for the filtration water line. The adapter is supplied with a sealing washer, helping provide a secure and watertight connection when correctly installed.

The NOGA NW5025 is a 4-way automatic shut-off valve (ASO valve) designed for use in reverse osmosis (RO) water filtration systems. It automatically controls the incoming water supply according to the operating condition of the RO system. When the storage tank becomes full and pressure increases, the valve automatically shuts off the feed water supply, preventing unnecessary water flow through the RO membrane and reducing wastewater. When filtered water is consumed and tank pressure drops, the valve allows the system to resume operation and refill the tank. The valve features four connection ports for integration into compatible RO tubing circuits. It is commonly used in traditional reverse osmosis systems equipped with a pressurised storage tank.

The plastic female adapter is designed for connecting 8 mm tubing to a 3/8" BSP threaded connection in water filtration and reverse osmosis installations. It features a female threaded 3/8" BSP connection on one side and an 8 mm tube connection on the other, providing a practical transition between filtration tubing and compatible threaded components. Its compact construction makes it suitable for use in under-sink filtration systems, water dispensers and other drinking-water installations. The adapter is manufactured from plastic, providing a lightweight and practical fitting for compatible water filtration connections.

Βάρος   0,3 kg Διάμετρος φίλτρου         2.5" (ίντσες) Τύπος φίλτρου  Φίλτρο ιζημάτων Ύψος φίλτρου   12" (ίντσες) Διάμετρος σπειρώματος              1/4" (ίντσες)

The 1/4" polypropylene tee fitting is designed for creating a three-way connection in the tubing of water filtration and reverse osmosis systems. Its compact T-shaped design allows a single water line to be divided into two branches or multiple components to be connected within the same installation. The fitting features quick-connect push-fit connections, allowing compatible 1/4" tubing to be inserted directly without conventional threaded fittings. This provides a simple and practical solution for assembling, extending or modifying filtration tubing installations. Made from polypropylene, the fitting is suitable for water filtration applications and is commonly used in under-sink filters, reverse osmosis systems, drinking-water systems and other installations using 1/4" tubing.

The PHILIPS AUT812 is a 3-in-1 replacement pre-filter cartridge designed for compatible PHILIPS under-sink reverse osmosis water purification systems. Its multi-function filtration stage works before the RO membrane, helping reduce sediment, suspended particles and chlorine, thereby improving incoming water quality and helping protect the reverse osmosis membrane for consistent system performance. Designed for convenient maintenance, the AUT812 integrates multiple pre-filtration functions into a single compact cartridge, reducing the need for several separate filter housings. The cartridge shown is specified with 5-micron filtration and is intended for compatible PHILIPS RO systems. PHILIPS documentation for systems using the AUT812 specifies a filter lifetime of up to 12 months, depending on inlet-water quality and usage conditions.

The PHILIPS AWP3754 X-Guard Ultra is an on-tap water filtration system designed to provide filtered drinking water conveniently and directly from the kitchen faucet. The X-Guard Ultra filter combines activated carbon fibre with a hollow-fibre membrane, helping reduce chlorine, lead, pesticides, microplastics and particles down to 0.1 micron, while filtering up to 99.99% of bacteria. The system offers three selectable water modes: filtered stream for drinking and cooking, unfiltered stream, and unfiltered shower mode for washing and cleaning. It provides a flow rate of 1.6 L/min and a filtration capacity of up to 1,200 L. One-click installation simplifies connection to a compatible faucet, while the quick-twist cartridge design and integrated replacement timer make routine filter maintenance easy.

The BWT CSV181275BWT is a 75 GPD replacement reverse osmosis membrane element designed to provide stable, high-quality purified drinking water in compatible RO systems. It features a spiral-wound polyamide thin-film composite membrane, manufactured using high-performance flat membrane sheets. The 75 GPD version provides a nominal production capacity of approximately 280 litres per day. The membrane provides a stabilized salt rejection rate of 96% and maintains high capacity even with cold inlet water. According to BWT, the 75 GPD membrane can fill a 7 L pressure vessel in approximately 36 minutes and maintains full performance at a water temperature of 15°C. Each membrane element is individually vacuum tested to ensure consistent manufacturing quality and reliable operation.

The ECOSOFT FPV12PECO is a high-pressure sediment water filter designed for the mechanical filtration of cold water in domestic installations. Its reinforced housing is engineered to withstand pressures of up to 30 bar, while the inlet and outlet feature 1/2" female threaded brass bushings for a strong and reliable connection. The system uses standard 2.5" × 10" cartridges, making it suitable for installation on the main incoming water line or other cold-water filtration applications. The filter is supplied with a 5-micron polypropylene (PP) melt-blown sediment cartridge, which helps retain suspended particles such as sand, rust and silt, protecting plumbing fixtures and water-using appliances. It provides a maximum flow capacity of 10 L/min, operates with cold water from 3°C to 43°C, and includes a mounting bracket, service wrench and screws for installation and maintenance.

The PHILIPS AWP3704 X-Guard is a compact on-tap water filtration system designed to provide filtered drinking water directly from the kitchen faucet. Its X-Guard filter uses high-quality natural activated carbon and reduces up to 99% of chlorine and taste-impairing substances, helping improve the taste and quality of mains tap water. Installation is simple using the appropriate faucet adapter, while the quick-twist design makes cartridge replacement easy. The system provides three selectable water modes: filtered stream for drinking and cooking, unfiltered stream, and unfiltered shower mode for washing and cleaning. It offers a water flow rate of 2 L/min and a filtration capacity of up to 1,000 L, while an integrated timer reminds the user when the cartridge should be replaced. The system is compatible with both PHILIPS X-Guard AWP305 and X-Guard Ultra AWP315 replacement cartridges.

Advanced RO filtration and enhanced water taste With the advanced RO filtration technology, this 4-stage filtration system has deep filtration down to 0.0001 microns. The 2.8 gallon tank ensures that you have enough storage. The 2 L/min fast flow allows you to enjoy pure-tasting water in seconds.

The EIGER EG-PF-01 is a curved drinking water tap designed for use with water filtration and reverse osmosis systems. It provides a dedicated outlet for filtered water, making it suitable for installation alongside the main kitchen faucet. Its tall, curved spout provides convenient access for filling glasses, bottles and other containers, while the side lever allows simple control of the filtered water flow. The 1/4" connection makes it suitable for connection to compatible filtration tubing and fittings commonly used in under-sink water filtration installations. With its stainless steel finish, the EG-PF-01 offers a clean and discreet appearance suitable for modern kitchen installations.

The Eiger antimicrobial water filter is a high-performance solid activated carbon block cartridge manufactured from 100% coconut shell activated carbon. It is designed to reduce chlorine, unpleasant odours, unwanted tastes and selected organic and chemical substances from water. It features antimicrobial protection that helps inhibit the growth of microorganisms within the filter, supporting its hygiene and filtration performance during use. With a 0.5μm filtration rating, it retains very fine particles and sediment, including sand, silt, rust and suspended solids. The porous activated carbon surface adsorbs unwanted substances, helping significantly improve the taste and odour of drinking water. It is compatible with countertop and under-counter filtration systems that accept standard 10″ x 2.5″ replacement cartridges.

The AQUA H10L 3-Part Filter Housing Set is a high-quality 10" water filter housing designed for reliable water filtration in residential, commercial, and light industrial installations. It features a blue sump and blue head with pressure relief valve (PRV), together with durable 3/4" BSP female brass connections. The AH-H10L series is manufactured from high-quality NSF/WRAS-approved materials and is certified for material and structural integrity. Its three-part construction provides convenient cartridge replacement and maintenance, while the housing accepts standard 2½" × 9⅞" cartridges, allowing the filtration cartridge to be selected according to the required application. It is suitable for both point-of-entry (POE) pre/post-filtration and point-of-use (POU) systems. The set includes a mounting bracket with screws, housing wrench and bacteriostatic cartridge centralizing ring.

The AQUAFILTER FCPRA-10N is a transparent anti-scale cartridge filled with polyphosphate media, designed to protect plumbing systems and water-using equipment against scale deposits. The polyphosphate inhibits scaling processes involving minerals such as calcium and magnesium, helping prevent deposits from forming on pipes, boilers and heating elements. Unlike an ion-exchange softening cartridge, the FCPRA-10N is primarily an anti-scale treatment cartridge: it inhibits mineral deposits rather than conventionally removing hardness minerals from the water. Its transparent housing allows the condition and remaining quantity of the polyphosphate media to be visually monitored. The cartridge is intended primarily for Point-of-Entry (POE) applications.