Water Pumps, Submersible & Tanks

The AQUASTRONG SMART2-42Z is a compact high-performance booster pump designed to increase water pressure in medium-sized commercial buildings, multi-dwelling properties, and residential applications. Featuring 4-metre self-priming capability, it offers greater installation flexibility and reliable operation even when the water source is located below the pump. Powered by a 550W motor, with a maximum head of 42 m and a maximum flow rate of 4.5 m³/h, it delivers stable pressure and excellent hydraulic performance for demanding water boosting applications. The integrated Intelligent Protection system safeguards the motor during operation, improving reliability and extending the pump's service life. The SMART2-42Z is suitable for installation with roof water tanks to increase water pressure for taps, showers, water heaters, and other household water outlets. It is recommended for homes between 60 and 150 m² and is designed for pumping clean water at temperatures up to 80°C.

The AQUASTRONG SMART2-32Z is a compact booster pump designed to increase water pressure in medium-sized commercial buildings, multi-dwelling properties, and residential applications. Featuring 4-metre self-priming capability, it offers greater installation flexibility and reliable operation even when the water source is located below the pump. With a 370W motor, a maximum head of 30 m, and a maximum flow rate of 4.5 m³/h, it delivers stable water pressure and efficient performance. The integrated Intelligent Protection system enhances operational safety while extending the pump's service life. The SMART2-32Z is suitable for installation with roof water tanks to increase water pressure for taps, showers, water heaters, and other household water outlets. It is recommended for homes between 60 and 150 m² and is designed for pumping clean water at temperatures up to 80°C.

The AQUASTRONG SMART2-42 is a compact commercial booster pump designed to provide reliable water pressure for medium-sized commercial buildings and multi-dwelling installations. Its powerful 550W motor delivers stable performance, high efficiency, and dependable operation for demanding water boosting applications. With a maximum head of 42 m and a maximum flow rate of 4.5 m³/h, it is an ideal solution where higher water pressure is required. The integrated Intelligent Protection system safeguards the motor during operation, improving reliability and extending service life. Suitable for clean water applications, the SMART2-42 handles liquid temperatures up to 95°C while maintaining a low operating noise level of only 50 dB, making it an excellent choice for commercial environments where quiet operation is important.

The AQUASTRONG SMART BOOSTER23 is a compact water pressure booster pump designed to improve water pressure in domestic water supply systems. It is suitable for applications such as water heaters, showers, washing machines, dishwashers, solar water heaters and other household installations requiring increased water pressure. Equipped with a permanent magnet DC motor, the pump combines energy-efficient operation with exceptionally low noise levels of just 28 dB. Its maximum power consumption is 100W, with a maximum flow rate of 2.2 m³/h and a maximum head of 23 m, providing effective pressure boosting for everyday household applications. The SMART BOOSTER23 is designed for circulating water at temperatures from 0°C to 95°C and operates within an ambient temperature range of 0°C to 55°C. Its compact and portable construction makes it practical for installation in various domestic water systems. The pump features a durable construction, with a design tested for 30,000 pressure cycles and 26,000 hours of operation, according to the manufacturer's packaging information. Its combination of low energy consumption, quiet operation and compact dimensions makes it a practical solution for improving water pressure in residential installations.

The DRENO COMPATTA 4MG is a single-phase automatic submersible sewage pump equipped with a Vortex impeller, designed for pumping wastewater, sewage and dirty water. The Vortex impeller design provides effective handling of wastewater containing suspended solids while helping reduce the risk of clogging. The pump features a 2" discharge outlet and operates from a 230V single-phase power supply. The automatic configuration allows the pump to start and stop according to the liquid level, making it suitable for wastewater pits, sumps, drainage systems and other applications requiring automatic operation. The COMPATTA 4MG can be installed as a free-standing pump, providing a simple and practical installation solution. For permanent installations, it can optionally be mounted on a guide rail system, allowing easier removal of the pump for inspection and maintenance.

The DRENO COMPATTA 32 M/G is a single-phase automatic submersible sewage pump equipped with a Vortex impeller, designed for reliable pumping of wastewater and sewage. The Vortex impeller configuration provides effective handling of wastewater and suspended solids while reducing the risk of clogging. The pump features a 2" discharge outlet and operates on a 230V/50Hz single-phase power supply. The COMPATTA 32 M/G is designed for automatic operation and can be installed as a free-standing unit for straightforward installation and maintenance. As an optional installation configuration, it can also be mounted on a guide rail system, making it suitable for fixed installations where convenient pump removal and servicing are required. The pump is supplied complete with a 10 m power cable, providing flexibility during installation.

The CFA25-40-180 is a high energy-efficient circulator pump designed for reliable water circulation in heating, hot-water circulation and other compatible circulation systems. Featuring a multistage centrifugal pump structure and electric operation, it provides efficient and dependable circulation while being suitable for installations where continuous and automatic pumping performance is required. The pump features a stainless steel construction, offering good durability and resistance to corrosion. It operates on a 230V/50Hz power supply and provides a maximum head of 4 m. Its compact circulator configuration makes the CFA25-40-180 suitable for integration into domestic and light commercial water circulation systems.

The IMAS IM25-6-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating under pressure in closed or open circuits. The pump features three selectable operating speeds, with power consumption of 46W, 67W and 93W, allowing its performance to be adjusted according to the requirements of the installation. It provides a maximum flow rate of 4.1 m³/h and a maximum head of 6 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and sealing flange are manufactured from stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-6-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The IMAS IM25-4S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids free from chemicals. It is suitable for domestic central heating and air-conditioning systems, operating in both closed and open pressurized circuits. The pump provides three selectable operating speeds, with power consumption of 38W, 53W and 72W, allowing its performance to be adapted to the requirements of the installation. Its hydraulic section is manufactured from cast iron and incorporates a wet rotor motor. The motor housing is made of die-cast aluminium, while the technopolymer impeller provides reliable and durable operation. The motor shaft is manufactured from hardened stainless steel, supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protection sleeve, stator sleeve and sealing flange are also manufactured from stainless steel. Additional construction features include a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. The motor has IP44 protection and Class F insulation. The IM25-4S-180 operates from a single-phase 230V/50Hz supply, has an installation length of 180 mm and features 1½" threaded connections. Installation must be carried out with the motor shaft in a horizontal position.

The IMAS IM25-8S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180 can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The IMAS IM32-10S-180 is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in closed or open pressurized circuits. The pump features three selectable operating speeds, with power consumption of 150W, 210W and 270W, allowing its performance to be adjusted according to the requirements of the heating or circulation system. It provides a maximum head of 10 m. The hydraulic section is manufactured from cast iron and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective casing, stator casing and closing flange are manufactured from stainless steel. Additional construction features include a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM32-10S-180 can operate with liquid temperatures up to 110°C and at a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1¼" threaded connections and must be installed with the motor shaft in a horizontal position.

The IMAS IM25-4S-180B is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic central heating and air-conditioning systems operating in closed or open pressurized circuits. The pump features three selectable operating speeds, with power consumption of 38W, 53W and 72W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.0 m³/h and a maximum head of 4 m. The hydraulic pump body is manufactured from brass and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective sleeve, stator sleeve and sealing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-4S-180B can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

The IMAS IM25-8S-180B is a three-speed hot water circulator pump designed for circulating clean water and liquids that do not contain chemicals. It is suitable for domestic heating and air-conditioning systems operating in pressurized closed or open circuits. The pump features three selectable operating speeds, with power consumption of 90W, 150W and 180W, allowing its performance to be adjusted according to the requirements of the installation. It delivers a maximum flow rate of 4.5 m³/h and a maximum head of 8 m. The pump body is manufactured from brass and incorporates a wet-rotor motor. The motor housing is made of die-cast aluminium, while the impeller is manufactured from technopolymer. The hardened stainless steel motor shaft is supported by graphite bearings and lubricated directly by the pumped liquid. The rotor protective sleeve, stator sleeve and sealing flange are made of stainless steel. The pump also features a ceramic thrust ring, ethylene-propylene sealing rings and a brass air vent plug. Designed for hot-water circulation, the IM25-8S-180B can handle liquid temperatures up to 110°C and a maximum operating pressure of 10 bar. It operates from a single-phase 230V/50Hz power supply and features IP44 protection and Class F insulation. The pump has an installation length of 180 mm, 1½" threaded connections and must be installed with the motor shaft in a horizontal position.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion and pressure vessels are essential components for effective pressure management in water supply, heating, and other hydraulic systems. They help absorb pressure fluctuations, protecting system components from excessive stress and premature wear. At the same time, they contribute to stable and efficient system operation by reducing sudden pressure variations.

Expansion vessels are essential components in heating and hydraulic systems, designed to absorb the expansion of water caused by temperature changes and help maintain stable system pressure. By compensating for variations in water volume, they help prevent excessive pressure build-up, reduce stress on system components, and contribute to reliable and efficient operation.

Expansion vessels are essential components in heating and hydraulic systems, designed to absorb the expansion of water caused by temperature changes and help maintain stable system pressure. By compensating for variations in water volume, they help prevent excessive pressure build-up, reduce stress on system components, and contribute to reliable and efficient operation.

Expansion vessels are essential components in heating and hydraulic systems, designed to absorb the expansion of water caused by temperature changes and help maintain stable system pressure. By compensating for variations in water volume, they help prevent excessive pressure build-up, reduce stress on system components, and contribute to reliable and efficient operation.