Filtration Accessories

The PHILIPS AUT780 is the dedicated 800 GPD replacement reverse osmosis filter for the PHILIPS AUT7006 under-sink water purification system. It forms the main purification stage of the system and uses a high-performance reverse osmosis membrane to provide deep filtration of mains water, helping reduce dissolved contaminants and impurities while maintaining the high water-production rate required by the tankless AUT7006 system. With a nominal capacity of 800 GPD, the AUT780 is designed for high-flow direct filtration and convenient cartridge replacement. According to PHILIPS specifications for the AUT7006, the RO filter has a recommended service life of approximately 48–60 months, depending on inlet-water quality and actual consumption. Its dedicated cartridge format ensures correct fit and operation with the PHILIPS AUT7006 system.

The PHILIPS AUT811 is a Carbon Block replacement cartridge designed for compatible PHILIPS on-tap water filtration systems, including the AUT1211. Its 3-stage microfiltration provides filtration down to 0.01 micron, helping reduce particulate matter, chlorine, lead and pesticides while improving the taste and odour of tap water. PHILIPS specifies up to 99% chlorine reduction for this cartridge. The cartridge features the PHILIPS QuickTwist design for quick, hygienic replacement without additional tools. It is designed for municipal tap water at an inlet temperature of 5–38°C and pressure of 0.1–0.4 MPa (1–4 bar). Depending on the specific AUT811 market version and operating conditions, PHILIPS documentation specifies a service life of up to 24 months.

The PHILIPS AUT870R400 is a replacement reverse osmosis filter with a nominal capacity of 400 GPD, designed as the main purification stage in a compatible PHILIPS RO water filtration system. Reverse osmosis technology provides extremely fine filtration, helping reduce dissolved contaminants, water hardness and other unwanted substances that conventional filtration may not effectively remove. PHILIPS RO technology provides filtration down to approximately 0.0001 micron, helping reduce contaminants such as chlorine, pesticides, heavy metals, bacteria and viruses, while also significantly reducing water hardness. The dedicated cartridge format is designed for straightforward replacement and reliable operation within its compatible PHILIPS filtration system. PHILIPS notes that actual filter life depends on daily water consumption and local inlet-water quality.

The PHILIPS AWP175 is the genuine replacement cartridge designed for the PHILIPS AWP1775 shower filtration system. It uses NSF-certified KDF filtration media to reduce residual chlorine and impurities such as rust and sediment, providing cleaner water for a more comfortable shower experience. The cartridge has a filtration capacity of up to 50,000 litres and supports a water flow of up to 8 L/min. It is designed for mains tap water with an operating temperature of 5–60°C and inlet pressure of 0.15–0.4 MPa (1.5–4 bar).

The PHILIPS X-Guard Power AWP183 is a replacement scale inhibitor media pack designed for the compatible PHILIPS X-Guard Power AWP9820 system. Rather than functioning as a conventional sediment or drinking-water filter cartridge, the AWP183 is specifically designed to help inhibit limescale formation in water-using appliances. The scale-inhibiting media helps prevent hardness minerals from forming deposits on internal components, contributing to the protection of appliances such as water heaters, washing machines and dishwashers. Regular replacement helps maintain the anti-scale performance of the X-Guard Power system. The package contains 2 replacement scale inhibitor elements. The AWP183 does not soften the water by removing calcium and magnesium; its function is to inhibit their tendency to form scale deposits.

The PHILIPS AWP225 Micro X-Clean Instant replacement filters are designed for compatible PHILIPS instant water filtration systems, including the AWP2980 Powered Pitcher. They use highly porous activated carbon fibre, providing efficient adsorption while maintaining a fast water flow. The Micro X-Clean Instant technology helps reduce chlorine, lead, pesticides and microplastics, improving the taste and quality of municipal tap water. Each cartridge provides a filtration capacity of approximately 100 litres, with a recommended service life of approximately 1 month, depending on water quality and consumption. The pack contains 3 replacement cartridges.  

The PHILIPS AWP9820 X-Guard Power is a 3-stage scale inhibitor designed to protect water-heating household appliances against scale formation and sediment. It is suitable for applications such as water heaters, washing machines and dishwashers, helping reduce scale accumulation and extend protection of equipment exposed to hard water. Its 3-stage filtration system filters sediment down to 40 microns, while the X-Guard Power antiscalant technology helps inhibit scale formation caused by hardness minerals such as calcium and magnesium. The system has a filtration capacity of up to 27,000 litres and a filter lifetime of up to 6 months, depending on local water quality and usage. The unit is made from BPA-free material and accepts the PHILIPS AWP183 replacement cartridge. It should be noted that the AWP9820 is not a water softener: it inhibits scale formation rather than removing calcium and magnesium from the water.  

The EIGER EG-05-01-C is a replacement water filter cartridge designed for compatible EIGER shower filtration systems. It is intended to maintain the filtration performance of the shower filter by replacing the used internal cartridge when required. The cartridge helps condition the water used during showering by reducing impurities targeted by the compatible filtration system. Its compact replaceable design allows routine maintenance without replacing the complete shower filter assembly. The specified connection/OD size is 8 mm × 3/8" BSP.  

The EIGER EG-600G-A8 is a high-performance replacement reverse osmosis membrane specifically designed for the EIGER EG-RO-600B A8 direct-flow system. With a nominal production capacity of 600 GPD, it acts as the system's main RO filtration stage, providing a high and consistent purified-water flow without requiring a conventional storage tank. The compatibility with the EG-RO-600B is also supported by EIGER's official documentation for that system. Using Thin Film Composite (TFC) membrane technology, it provides an extremely fine separation rating of approximately 0.0001 micron and helps reduce dissolved solids, salts, heavy metals, microorganisms and other unwanted substances from the incoming water. Its estimated service life is 18–24 months, depending on feed-water quality, usage, operating conditions and timely maintenance of the system's pre-filters.

The EIGER EG-PCT-A8 is a replacement PCT filter cartridge designed specifically for the EIGER EG-RO-600B reverse osmosis water filtration system. It forms part of the system's multi-stage filtration process and is intended to restore filtration performance when the original cartridge reaches the end of its service life. Its enclosed cartridge construction allows the filtration element to be replaced as a complete unit, helping provide a clean and convenient maintenance process. The cartridge is specifically identified as compatible with the EG-RO-600B, making it suitable for scheduled replacement within this system.

The Eiger Infrared is an in-line water treatment filter designed for refrigerators, reverse osmosis systems and other compatible water filtration installations. It contains specialised infrared media intended for use as a final water-treatment stage. It can be installed after the main filtration stages of a system, providing a practical solution for applications requiring a compact in-line cartridge. The filter measures 10″ in height and 2″ in diameter and features 1/4″ connections for straightforward installation in compatible water supply lines.

The EIGER EG-SC-40 is a self-cleaning central water filter designed for installation on the main incoming water supply. It provides mechanical pre-filtration at 40 micron, helping capture sediment and suspended impurities before the water reaches the downstream plumbing system and connected equipment. The filter helps reduce particles such as sand, rust, silt and other suspended solids, making it suitable as a first-stage protective filter for domestic water installations. By intercepting these contaminants at the water inlet, it can help protect pipes, faucets, water heaters and other downstream equipment from particulate accumulation. Its self-cleaning / flushing design allows accumulated contaminants to be discharged through the lower drain valve, simplifying routine maintenance without requiring frequent removal of the filtration element. The integrated pressure gauge allows convenient monitoring of the system pressure. With an R2 3/4" pipe thread, the EG-SC-40 is suitable for compatible main water supply installations where compact sediment pre-filtration and easy maintenance are required.

The DIGIFLOW 8000T water flow and filter change meter is your reliable digital companion for monitoring when it's time to replace your water filters. It measures the gallons of water going through your filters, notifying you when it's time to change them.

The Eiger 1812 – 50GPD reverse osmosis membrane is designed for use in domestic and commercial reverse osmosis systems. It provides an extremely fine separation capability of up to 0.0001μm and helps reduce dissolved salts, heavy metals and other unwanted substances from the water. With a nominal production capacity of 50 gallons per day, it delivers reliable performance and is suitable for most standard reverse osmosis systems using 1812-type membrane housings. Its high-quality construction provides dependable operation and a long service life when used according to the system specifications and together with suitable pre-filters. Main Features 1812-type reverse osmosis membrane Nominal production capacity of 50GPD Separation capability of up to 0.0001μm Helps reduce dissolved salts and total dissolved solids Helps reduce heavy metals and other unwanted substances Compatible with most standard reverse osmosis systems Suitable for domestic and commercial applications Compact design and easy replacement Service life of up to 24 months, depending on use and water quality

The Eiger In-Line is an alkaline water filter designed for refrigerators, reverse osmosis systems and other compatible water filtration installations. It is primarily intended for use as a final treatment stage after the reverse osmosis membrane. Its specialised media helps enrich the water with selected minerals, such as calcium and magnesium, and may increase the water’s pH depending on the incoming water quality and composition. It can be used as an additional remineralisation stage in reverse osmosis systems, where dissolved salts and minerals have previously been significantly reduced. Its compact 10″ x 2″ design and 1/4″ connections allow straightforward installation in compatible water supply lines.

The EIGER BBION10 is a replacement cartridge used as a water-softening stage in compatible central water-filtration installations. Its nominal size is 10 inches high and 4.5 inches in diameter, matching the Big Blue 10-inch housing format. Product code: WF-ION-10BB Filter type: Water-softening cartridge Nominal size: 10″ high × 4.5″ diameter Compatible housing format: Big Blue 10″

The EIGER BBION20 is a replacement cartridge used as a water-softening stage in compatible central water-filtration installations. Its nominal size is 20 inches high and 4.5 inches in diameter, matching the Big Blue 20-inch housing format. Product code: WF-ION-20BB Filter type: Water-softening cartridge Nominal size: 20″ high × 4.5″ diameter Compatible housing format: Big Blue 20″

Το βρυσάκι είναι κατασκευασμένο για τοποθέτηση στον πάγκο ή τον νεροχύτη της κουζίνας για συστήματα κάτω πάγκου ή αντίστροφης όσμωσης. Είναι κατασκευασμένο από ατσάλι SS304.

The PHILIPS X-Guard AWP305 is a replacement filter cartridge for compatible PHILIPS on-tap water filtration systems. It uses high-quality natural activated carbon to reduce up to 99% of chlorine and substances that negatively affect the taste of tap water, providing fresher, better-tasting water for drinking and cooking. The cartridge provides a filtration capacity of up to 1,000 litres and is designed specifically for mains tap water. Its practical twist-type design enables quick and straightforward replacement. PHILIPS lists the AWP305 as a compatible replacement cartridge for several X-Guard on-tap systems, including the AWP3703, AWP3704 and AWP3705P1.

The Eiger PP 10″ x 2.5″ – 5μm polypropylene sediment filter is designed to effectively retain fine particles and solid impurities from water. With a 5-micron filtration rating, it helps remove sediment, sand, silt, rust and other suspended particles. It is suitable for compatible countertop and under-counter filtration systems that accept standard 10″ x 2.5″ replacement cartridges. It is commonly used as a pre-filter to protect subsequent filtration stages and help extend the service life of activated carbon filters, reverse osmosis membranes and other system components. Main Features Polypropylene sediment filter cartridge 5μm filtration rating Retains sand, silt, rust and suspended particles Compatible with countertop and under-counter systems Standard 10″ x 2.5″ dimensions Suitable for use as the first filtration stage Helps protect downstream filters Quick and easy replacement

The Eiger In-Line PP is a polypropylene sediment filter designed for refrigerators, reverse osmosis systems and other compatible water filtration applications. With a 5μm filtration rating, it helps retain solid particles and sediment such as soil, sand, rust, silt and other suspended impurities measuring 5μm or larger. The filter is primarily used as a pre-filtration stage, helping protect downstream cartridges and system components from sediment build-up. This supports consistent system performance and helps extend the service life of the overall filtration system. Its compact in-line design and 1/4″ connections allow easy installation in compatible water supply lines.

Precision engineered high quality ceramic filter, this ceramic water filter delivers excellent performance in removing impurities from your water supply. Microscopic filtration of just 0.3μm effectively captures even the smallest particles, sediment and bacteria, ensuring your water is crystal clear and safe to drink. Easy Installation: Designed to fit standard 10″ x 2.5″ filter housings, this ceramic filter is a breeze to install, making it a convenient addition to your existing water filtration system. Healthier Living: By removing contaminants and impurities, this filter improves the taste and quality of your drinking water, promoting a healthier lifestyle for you and your family. Additional information Weight 0,3 kg Filter type           Ceramic filter Filter Diameter  2.5" (inches) Micron  0.3μm Filtration Stages               One (1) Compatible devices         Countertop, Under Sink Filter Height       10" (inches)

The AQUAFILTER FCCA is a Granular Activated Carbon (GAC) replacement cartridge designed to improve the quality, taste and odour of drinking water. Its filtration media uses a blend of activated carbons, including coconut-shell granular activated carbon and bituminous activated carbon, providing effective adsorption of chlorine and unwanted organic compounds. AQUAFILTER specifies the FCCA series for both Point-of-Use (POU) and Point-of-Entry (POE) water filtration applications. The cartridge helps reduce chlorine, unpleasant tastes and odours, pesticides and volatile organic compounds (VOCs) from the water supply. Its up-flow design increases contact time between the water and activated carbon for effective adsorption. With dimensions of 9 7/8" × 2 1/2", it is suitable for compatible standard 10-inch filter housings and can be incorporated into multi-stage domestic water filtration systems.

The AQUAFILTER FCCBL is a replacement Carbon Block activated carbon cartridge designed for the treatment of cold drinking and general-use water. Its compressed activated carbon media effectively adsorbs chlorine and organic compounds, while reducing substances responsible for unpleasant taste and odour. The carbon-block structure also provides mechanical filtration of suspended particles, making the cartridge suitable for use as part of multi-stage domestic water filtration systems. With dimensions of 9 7/8" × 2 1/2", the FCCBL is designed for compatible standard 10-inch filter housings. It can be used as a stand-alone carbon filtration stage or after a sediment pre-filter, helping improve the organoleptic properties of the water and providing additional protection for subsequent filtration stages.